HOFTRONIC 4406707 Wifi Remote Controller Instruction Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
- HOFTRONIC 4406707 Wifi Remote Controller
- BUTTON DESCRIPTION
- PAIRING
- GROUP FUNCTION
- COMPATIBLE WITH THESE PRODUCTS
- INTENDED USE / APPLICATION
- USAGE GUIDELINES / MAINTENANCE
- ENVIRONMENTAL PROTECTION
- COMMENTS / GUIDELINES
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HOFTRONIC 4406707 Wifi Remote Controller
BUTTON DESCRIPTION
PAIRING
- WIFI Device: Lighting on( no flashing)
- Long press button-ON-towards to the device until the device’s off and light again,mean s it works.
- Related to the WIFI router’s signal,advise 5-10pcs at most.
Pairing the remote
Long press the button-off-towards the devices until the indicator flashes three times,user cannot use the controller to operate the device.
GROUP FUNCTION
Combine some devices in one area and keep others aside
- WIFI Device: Lighting on (no flashing)
- Press the group button,A or B or C or D first
- Long press button-ON-towards to the device until the device’s off and light again, means it works
- If users press group button,then only the devices under the group can work.
ATTENTION: Only compatible devices can be paired.
COMPATIBLE WITH THESE PRODUCTS
Article no/Product name
- 4406721: Homeylux Wifi + Bluetooth Filament E27 A60
- 4406745: Homeylux Wifi + Bluetooth Filament E27 ST54
- 4406769: Homeylux Wifi + Bluetooth Filament E27 G95
- 4406783: Homeylux Wifi + Bluetooth Filament E27 G125
- 5422188: Lumi Smart Ceiling Light Black
- 5422171: Lumi Smart Ceiling Light White
- 4405779: Smart Bulkhead 18W
- 4405793: Smart Bulkhead 25W
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can only be used indoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic Smart products visit www.hoftronicsmart.com Hoftronic Smart shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic Smart reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronicsmart.com
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale. Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.
CE DECLARATION
The product complies with the following directives:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.
©2022 HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert
The Netherlands. All rights reserved.