AC INFINITY HS8025A-X Axial Series Project Cooling Fans User Manual
- June 17, 2024
- AC Infinity
Table of Contents
AXIAL SERIES
PROJECT COOLING FANS
USER MANUAL
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and
friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us.
Visit www.acinfinity.com and click contact
for our contact information.
MANUAL CODE AF1802X1
| PRODUCT | MODEL | UPC-A |
|---|---|---|
| AXIAL 8025 | HS8025A-X | 8.54759E+11 |
| AXIAL 8038 | LS8038A-X | 8.54759E+11 |
| AXIAL 9225 | HS9225A-X | 8.54759E+11 |
| AXIAL 9238 | HS9238A-X | 8.54759E+11 |
| AXIAL 1225 | LS1225A-X | 8.54759E+11 |
| AXIAL 1238 | HS1238A-X | 8.54759E+11 |
| AXIAL 1751 | HS1751A-X | 8.54759E+11 |
| AXIAL S1225 | AI-120SCX | 8.54759E+11 |
| AXIAL S1225D | AI-120SCXD | 8.54759E+11 |
| AXIAL S1238 | AI-1238SCX | 8.19137E+11 |
| AXIAL S1238D | AI-1238SCXD | 8.19137E+11 |
| AXIAL LS1238 | LS1238A-X | 8.19137E+11 |
FAN SPECIFICATIONS
CASE SIZE
Square axial fans come in the standard sizes set by the industry. They are
commonly quoted with millimeters in the format length time height times width.
A case size measuring 120 mm tall, 120 mm long, and 38 mm wide may be quoted
as 120 x 120 x 38 mm.
CURRENT AND VOLTAGE
Fans designed to be powered by alternating current are known as AC fans. They
are available in two voltage ranges, 100 to 125V, and 200 to 240V. A fan rated
between 100 to 125V can be powered by household outlets in the US, which run
at around 120V AC.
CONNECTORS
AC fans usually have terminal or wires as its power connector, located on the
edges of its case.
Terminals are two metal prongs which can be attached to a cord such as a power
plug. Wire connectors, also known as leads are directly wired to the power
source.
SPEED
Some applications demand a high airflow while others require minimal noise. To
meet these requirements, fans are available in different speeds rated in RPM
or rotations per minute. Given the same fan size, a higher RPM is correlated
with higher airflow and noise.
BEARINGS
Axial fans are available with different types of bearings that can affect its
life expectancy and mounting position. Dual ball bearings have the longest
life and allows the fan to be mounted in any direction. Sleeve bearings have a
low cost but short life expectancy.
KEY FEATURES
PRODUCT CONTENTS
FAN REPLACEMENT
STEP 1- COMPATIBILITY
Before you begin, please make sure that your new fan has a case size and
voltage range that is compatible with the previous fan. Please turnoff any
power going into your old fan.
STEP 2 – PREVIOUS FAN HAS TERMINAL CONNECTORS
If the fan you are trying to replace has terminal connectors, detach its power
connector from the terminals by pulling it off the fan. If the connectors
cannot be pulled off, please see page 10 for more information on previous fan
that has wired connectors. Mount the new fan into position using the previous
fan’s hardware. Then attach the power connectors onto the terminals of your
new fan. Turn the power back on and your new fan should begin to run.
STEP 2 – PREVIOUS FAN HAS WIRED CONNECTORS
If the fan you are trying to replace has permanent wires connected to the
power source that can’t be removed by pulling on it, cut the wire to remove
the previous fan. Then take the power plug cord included in this kit and
remove the head with a wire stripper. Under the cords plastic should be two
identical wires with their tips exposed.
STEP 3 – WIRING (LEADS)
The previous power source should have a set of two wires. Connect one wire
from the plug cord to one wire on the power source, then repeat for the second
pair.
STEP 4 – CONNECTING
You can connect the two wire pairs by using a connect or block or electrical
tape and wire connectors. Exposed wires and terminals can be hazardous when
the fan is powered.
STEP 5 – TERMINALS
Mount the new fan into position using the previous fan’ s hardware. Then
attach the power cord’s connectors onto the terminals of your new fan.
MOUNTING
STEP 1 – MARKING
Use the fan to determine the exact position where you wish to mount it.
Outline the center circle and four outer screw holes with a pencil.
Please see page 14 for Hinge Mounting Instructions for Speed Control Fan Kits.
STEP 2 – DRILLING
Attach a hole saw onto the power drill, create the center hole as outlined by
your markings from the previous step. The hole saw size is dependent on the
fan’s case size. Using a power drill, create four screw holes as outlined by
your markings from the previous step. We recommend using a drill bit size from
10/64” to 14/64”.
MOUNTING
STEP 3 – POSITIONING
Position the fan against the hole just created.
Place a wire guard over the fan’s side and another guard on the opposite end
while keeping the screw holes aligned.
STEP 4 – MOUNTING
Mount the unit using four machine screws while holding each corresponding nut
in place. Use a screwdriver to finish tightening the unit securely.
Please see page 15 on instructions on powering the fan.
MOUNTING
STEP 1 – ATTACHING HINGE
To attach the hinge that is included in the kit, slide the screw through the
front end of the fan and the hinge as shown. Tighten the screw appropriately.
Hinges are only included with Speed Control Fan Kits: S1225, S1225D, S1238,
and S1238D.
STEP 2 – MOUNTING HINGE
To mount the hinge on to your setup, use the included wood screw to drill into
position. You may need to turn the hinge to its side to create a clear pathway
to mount the wood screws through the hinge and onto a surface. Please see page
15 on instructions on powering the fan.
POWERING
STEP 1 – TERMINAL
After mounting your fan you can then attach the power plug cord onto the fans
terminal.
STEP 2 – POWERING
Lastly, plug the cord’s head into a standard outlet.
You may also power the fan with a wired power source, please see page 10 and
11.
SPEED CONTROLLER
AC INFINITY PRODUCTS
AIRPLATE SERIES
The AIRPLATE series is designed to cool home theater and audio video cabinets.
The fans are powered by USB port or power outlets. Includes an inline speed
controller and Boost Speed Adapter. The fans can also be temperature
controlled with an Advance Thermal Controller (sold separately).
| PRODUCT | MODEL | DIMENSIONS |
|---|---|---|
| AIRPLATE S1 | AI-CFS80BA | 4.6 x 4.6 x 1.3 in. |
| AIRPLATE S3 | AI-CFS120BA | 6.3 x 6.3 x 1.3 in. |
| AIRPLATE S5 | AI-CFD80BA | 8.4 x 4.4 x 1.3 in. |
| AIRPLATE S7 | AI-CFD120BA | 11.7 x 6.1 x 1.3 in. |
| AIRPLATE S9 | AI-APS9 | 17.5 x 6.1 x 1.3 in. |
AIRCOM SERIES
The AIRCOM component fan system cools receivers, amplifiers, and other AV
components. S-Series models feature a thermal trigger and speed control.
T-Series features a LCD digital display with thermal and speed control, alarm
alerts, failure triggers, and backup memory.
| PRODUCT | MODEL | DIMENSIONS |
|---|---|---|
| AIRCOM S6 | AI-ACS6 | 11.6 x 6.3 x 1.5 in. |
| AIRCOM S7 | AI-ACS7 | 11.6 x 6.3 x 1.5 in. |
| AIRCOM S8 | AI-ACS8 | 17 x 13.5 x 1.5 in. |
| AIRCOM S9 | AI-ACS9 | 17 x 13.5 x 1.5 in. |
| AIRCOM T8 | AI-ACT8 | 17 x 13.5 x 1.5 in. |
| AIRCOM T9 | AI-ACT9 | 17 x 13.5 x 1.5 in. |
WARRANTY
This warranty program is our commitment to you, the original purchaser, that
each product sold by AC Infinity will be free from defects in manufacturing
for a period of two years from the date of purchase. If a product is found to
have a defect in material or workmanship, we will take the appropriate actions
defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any
products from AC Infinity. The program covers products that have become
defective, malfunctioned, or expressively if the product becomes unusable. The
warranty program goes into effect on the date of purchase. The program will
expire two years from the date of purchase. If your product becomes defective
during that period, AC Infinity will replace your product with a new one or
issue you a full refund. The warranty program does not cover abuse or misuse.
This includes physical damage, submersion of the product in water, incorrect
Installation such as wrong voltage input, and misuse for any reason other than
intended purposes. AC Infinity is not responsible for consequential loss or
incidental damages of any nature caused by the product. We will not warrant
damage from normal wear such as scratches and dings.
If you are not 100% satisfied with this product, we will be happy to replace
it or issue you a full refund. Please contact us!
COPYRIGHT © 2018 AC INFINITY INC.
ALL RIGHTS RESERVED No part of the materials including graphics or logos
available in this booklet may be copied, photocopied, reproduced, translated
or reduced to any electronic medium or machine readable form, in whole or in
part, without specific permission from AC Infinity Inc.
www.acinfinity.com
EMAILsupport@acinfinity.com
WEBwww.acinfinity.com
LOCATION Los Angeles, CA
Documents / Resources
| AC
INFINITY HS8025A-X Axial Series Project Cooling
Fans
[pdf] User Manual
HS8025A-X Axial Series Project Cooling Fans, HS8025A-X, Axial Series Project
Cooling Fans, Project Cooling Fans, Cooling Fans, Fans
---|---
| AC
INFINITY HS8025A-X Axial Series Project Cooling
Fans
[pdf] User Manual
HS8025A-X Axial Series Project Cooling Fans, HS8025A-X, Axial Series Project
Cooling Fans, Series Project Cooling Fans, Project Cooling Fans, Cooling Fans,
Fans
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>