ANKER SOLIX Smart Meter User Guide
- July 15, 2024
- Anker
Table of Contents
ANKER SOLIX Smart Meter
Specifications
- Product Name: Anker SOLIX Smart Meter
- Model Number: A17X7
- Part Number: 51005004673 V01
Product Information
The Anker SOLIX Smart Meter is a high-quality device designed for monitoring
and measuring electrical consumption. It is equipped with advanced technology
to provide accurate readings and help users track their energy usage
efficiently.
Product Usage Instructions
Safety Precautions
It is crucial to follow all safety instructions provided in the user manual to
prevent any risks of electric shock or injury. Only qualified personnel should
handle the installation and operation of The device.
FAQ
Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges during the installation process, please refer to
the troubleshooting section of the user manual. You can also contact Anker’s
customer support for assistance.
Anker SOLIX Smart Meter
Scan for online support.
support@anker.com
(DE) +49 (0) 69 9579 7960
+49 (800) 000 2522 (Anker SOLIX)
Scan to download the Anker app.
IMPORTANT SAFETY INSTRUCTIONS
Information for your own safety
This manual does not contain all of the safety measures for operation of this
meter because special operating conditions, local code requirements or local
regulations may necessitate further measures. However, it does contain
information that must be adhered to for your own personal safety and to avoid
material damage. This information is highlighted by a warning triangle with an
exclamation mark or a lightning bolt depending on the degree of actual or
potential danger:
Warning
This means that failure to observe instructions can result in death, serious
injury or considerable material damage.
Caution
This means the hazard of electric shock and failure to take the necessary
safety precautions will result in death, serious injury or considerable
material damage.
Qualified personnel
Installation and operation of the device described in this manual may only be performed by qualified personnel. Only people that are authorized to install, connect and use this device, who have the proper knowledge about labeling and grounding electrical equipment and circuits and can do so in accordance with local (safety)regulations, are considered qualified personnel in this manual.
Use for the intended purpose
This device may only be used for the application cases specified in the
catalog and the user manual and only in connection with devices and components
recommended and approved by Anker.
Proper handling
The prerequisites for perfect, reliable operation of the product are proper transport, storage, installation and connection, as well as proper operation and maintenance. During its operation certain parts of the meter might carry dangerous voltages.
- Only use insulated tools suitable for the voltages this meter is used for.
- Do not connect while the circuit is connected to a power or current source.
- Only place the meter in a dry environment.
- The meter is intended to be installed in a Mechanical Environment ‘M1’, with Shock and vibrations of low significance and Electromagnetic Environment ‘E2’, as per 2014/32/EC Directive. The meter is intended for indoor use. The meter shall be installed inside a suitable IP rated enclosure, in accordance with local codes and regulations.
- Do not mount the meter in an explosive area or exposed to dust, mildew and/or insects.
- Make sure the used wires are suitable for the maximum current of this meter.
- Make sure the AC wires are connected correctly before activating the current/voltage to the meter.
- Do not touch the meter’s connection clamps directly with your bare hands, with metal, blank wire or other conducting material as you will risk an electric shock that could cause possible injury, serious injury or death.
- Maintenance and repair of the meter should only be carried out by qualified personnel.
- Never break any seals (if present on this meter) to open the cover as this might influence the functionality or accuracy of the meter, and will void all warranty. • Do not drop, or allow physical impact to the meter as there are high precision components inside that may break and affect the meter measurement negatively.
- All clamps should be properly tightened.
- Make sure the wires fit properly in the connection clamps.
- If the wires are too thin it will cause a bad contact which can spark causing damage to the meter and its surroundings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>