SENA M1 Smart Mountain Bike Helmet User Guide

SENA M1 Smart Mountain Bike Helmet

PRODUCT FEATURES

The M1 is comfortable and protective mountain bike helmet. The M1 with built- in Bluetooth® capabilities allows you to hear GPS navigation, take phone calls and listen to your favorite tunes. You can use the Bluetooth® Intercom to communicate with other M1 users and use the LED Taillight to ride safely.

• Bluetooth® 5.1
• Four-Way Intercom
• Intercom up to 900 m (0.6 mi)*
• Taillight
• Advanced Noise Control™

GETTING STARTED

1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM.
2. Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.

QUICK START GUIDE

Product Details

How To Wear the Helmet

1. Position the helmet on your head with the front covering your forehead.

2. Position the strap adjuster centered, just below your ears.

3. Position the helmet low on your forehead with the buckle under the chin and back against the throat.
   The straps should fit comfortably around both ears.

4. After removing the chinstrap pad, adjust the chinstrap tension at the buckle so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed.
   

5. Secure the excess strap with O-ring and then attach the chinstrap pad.

Note: Check the chinstrap’s position and tension regularly to ensure proper fit.

6. Turn the retention system knob clockwise to tighten or counterclockwise to loosen.
7. To change the height of the retention system, firmly pull or push the retention system upward or downward to a different position.
   

WARNING: For maximum protection, this helmet must be fitted and attached properly to the wearer’s head in accordance with the following instructions. If after adjustment the helmet does not fit properly, do not use the helmet. Return it to the retailer or Sena.

Sena Cycling App

Download the Sena Cycling App at Google Play Store or App Store.

|
---|---

Sena Device Manager

The Sena Device Manager allows you to upgrade the firmware and configure its settings directly from your PC or Apple computer.
Download the Sena Device Manager from sena.com.

Icon Legend

Tap button the specified number of times

Press and Hold button for the specified amount of time

“Hello”

Audible prompt

Basic Operations

• Powering On

• Powering Off

• Volume Up

• Volume Down

Checking the Battery Level

Phone Pairing

1. 
2. Select M1 in the list of Bluetooth devices detected.

• The Bluetooth system will enter the Phone Pairing mode automatically when you initially turn on the Bluetooth system.
• For more information on phone pairing, refer to the User’s Guide.

Mobile Phone

• Answer a Call

• End/Reject a Call

• Call a Voice Assistant

Music Controls

• Play/Pause

• Next Track

• Previous Track

Bluetooth Intercom

Up to three other people can be paired with the helmet for Bluetooth intercom conversations.

Intercom Pairing

There are two ways to pair the Bluetooth system.

Using the Smart Intercom Pairing (SIP)

SIP allows you to quickly pair with your friends for intercom communication by scanning the QR code on the Sena Cycling App without remembering the button operation.

1. Pair the mobile phone with the Bluetooth system.

2. Open the Sena Cycling App and tap (Smart Intercom Pairing Menu).

3. Scan the QR code displayed on your friend ( B )’s mobile phone.

   • Your friend (B) can display the QR code on the mobile phone by tapping > QR code ( ) on the Sena Cycling App.

4. Tap Save and check that your friend ( B ) is paired with you (A) correctly.

5. Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends (C) and (D).

Note: The Smart Intercom Pairing (SIP) is not compatible with Sena products that use Bluetooth 3.0 or below.

Using the Button

1. 
2. 
3. Repeat the steps 1 and 2 to pair with Intercom Friends C & D.

Two-Way Intercom

Last-Come, First-Served

• YOU
  

• Intercom Friend 1
  

• YOU
  

• Intercom Friend 1
  

• Intercom Friend 2
  

• YOU
  

• Intercom Friend 1
  

• Intercom Friend 2
  

• Intercom Friend 3
  

  • Start/End with Intercom Friend 1

  • Start/End with Intercom Friend 2
    

  • Start/End with Intercom Friend 3
    

LED Taillight

Using the SENA Button

• LED On and Solid
  

• Night Flash
  

• Day Flash
  

• LED Off
  

Note: Do not tap the button continuously.

Using the Sena Cycling App

You can control the LED Taillight through the Sena Cycling App.

Bluetooth System Configuration Menu

• Accessing the Configuration Menu

• Navigating Between Menu Options

• Execute Menu Options

Troubleshooting

• Troubleshooting Factory Reset

• Fault Reset

Note: Fault Reset will not restore the Bluetooth system to factory default settings.

QUICK REFERENCE

Basic Operations

| Power on|
Power off|
Volume up/down|

Mobile Phone

| Answer phone call|
End/reject phone call|
Call a Voice Assistant|

Music

| Play/Pause music|
Track forward|
Track backward|

Intercom

| Intercom pairing|
Start/end intercom|

LED Taillight

| LED on and solid|
Night flash
Day flash
LED off

References

• SENA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>