2016-2022 Hyundai Wheel Locks Owner’s Manual

July 13, 2024
HYUNDAI

2016-2022 Hyundai Wheel Locks

Specifications

  • Vehicle Model: Multiple
  • Model Year: Multiple
  • Part No.: Multiple
  • Language: English
  • Revision Date: 4/26/2024

Product Usage Instructions

  • A. Before proceeding, verify that the seating surface of the removed lug nuts matches the seating surface of the wheel locks. Do not continue if they do not match.
  • B. Install one (1) Wheel Lock onto each wheel by hand.
  • A. Using the supplied Wheel Lock Key, place it on top of each Wheel Lock and turn until the patterns engage.
  • B. Tighten each Wheel Lock by hand. Do not use an impact gun as it may cause damage.

FAQ

  • Q: Can I use Wheel Locks on steel wheels?
  • A: No, Wheel Locks must not be applied to steel wheels or the temporary spare tire.
  • Q: What precautions should I take when installing Wheel Locks?
  • A: Ensure the seating surfaces match, do not use an impact gun, and follow the installation steps carefully.

Vehicle Model: Multiple

  • Model Year Multiple:……………………………………..
  • Part No. Multiple:………………………………………….
  • Language English:…………………………………………
  • Rev. Date 4/26/2024:……………………………………

Accessory: Wheel Locks

  • Difficulty: ( A )

Note: The difficulty  stated above reflects the minimum level of expertise required to install the accessory

  • (A) Customer
  • (B) Dealer Technician
  • (C) Master Technician or Specialist

Application Notes

Alloy Wheels Only
Wheel Locks must NOT be applied to steel wheels or the temporary spare tire.

Instructional Symbols / Definitions

  • Denotes warnings that may lead to serious physical injury or vehicle damage
  • Denotes cautions to be taken to avoid physical injury or electronic component damage
  • Denotes cautions to be taken to avoid vehicle and component damage
  • Denotes quality processes to be checked before moving to the next step
  • Denotes specific tools that are necessary to complete a step
  • NOTE: Denotes important information to be reviewed during the step

Denotes personal protective equipment (PPEs) that may be required for a step. Examples of safety equipment icons are noted below:

Basic Required Tools

2016-2022-Hyundai-Wheel-Locks-
FIG-7

Part Weight (Gross)

  • Weight information is located on the Part Number Label.

FMVSS 110 Compliance Information

All dealers must determine if the Net weight they have added in the form of all options or accessories when added to the weight of all Port/Dealer Installed options or accessories, exceeds the lesser of 1.5% of GVWR or 100 lbs. If the additional weight does exceed the lesser of the indicated thresholds, a “Load Carrying Capacity Reduced” label must be installed. A black, fine-point, indelible marker must be used to write by hand onto the label, the reduced carrying capacity in kilograms or pounds, which is the total weight of all added options and accessories. Load Label Part Number: NP070 – 09003

WARNING! The factory standard Lug Nuts should be reinstalled on the vehicle for any type of high-performance driving.

Notes to the installer

  1. Read the entire Installation Instructions before beginning the installation of the part.
  2. If applicable, scan the barcode label located on the accessory part or packaging before installing, to register the part. If this accessory is installed as a replacement, register the removal of the old part before registering the new part. Old and new parts will have different barcode data, and the old registration cannot be reused.
  3. Make sure the vehicle is completely clean and dry in the area(s) where the part is to be installed.
  4. Ensure the vehicle is properly protected in the area(s) that the accessory is to be installed.
  5. NEVER place tools on painted surfaces, seating surfaces, dash pads, consoles, or floor carpets/mats.
  6. Always wear appropriate personal protective equipment, including gloves, safety glasses, etc., when required.

Genuine Accessories

Kit Overview2016-2022-Hyundai-Wheel-Locks-FIG-8

No. Qty Description No. Qty Description
1 4 Wheel Lock 4 1 Important Notice Card
2 1 Wheel Lock Key 5a 1 ID Card and Order Form/Envelope
3 1 Plastic Zip Lock Bag 5b 1 ID/Order Card

Product will contain either 5a or 5b ID/Order Material(s)

INSTALLATION

2016-2022-Hyundai-Wheel-Locks-FIG-9 2016-2022
-Hyundai-Wheel-Locks-FIG-10 2016-2022
-Hyundai-Wheel-Locks-FIG-11 2016-2022
-Hyundai-Wheel-Locks-FIG-12 2016-2022
-Hyundai-Wheel-Locks-FIG-13 2016-2022
-Hyundai-Wheel-Locks-FIG-14 2016-2022
-Hyundai-Wheel-Locks-FIG-15

NOTE

  • A. Remove one (1) lug nut from each wheel using a 21mm deep well socket with a protective sleeve. Do not allow the socket to scrape the wheel while removing the lug nuts.

NOTE: A power tool or other suitable tool, may be used to remove the factory lug nut using a 21mm deep well socket with a protective sleeve.

NOTE

  • A. Before proceeding with wheel lock installation, verify and confirm the seating surface of the removed lug nuts matches the seating surface of the wheel locks. Do NOT proceed with wheel lock installation if the seating surfaces do not match.
  • B. By hand, install one (1) Wheel Lock onto each wheel.

NOTE

  • A. Using the supplied Wheel Lock Key, place it on top of each Wheel Lock, turning until the Wheel Lock Key and Wheel Lock patterns engage.
  • B. Tighten each Wheel Lock by hand. Do not use an impact gun.

CAUTION: Use of an impact gun may cause permanent damage to the Wheel Lock and Wheel Lock Key.

NOTE

  • A. Using a torque wrench and 21mm deep well socket with a protective sleeve, place the socket on the Wheel Lock Key, and while applying inward pressure, tighten to the factory torque specification for each Wheel Lock. Do not allow the socket to scrape the wheel while tightening.

CAUTION: Use of an impact gun may cause permanent damage to the Wheel Lock and Wheel Lock Key.

NOTE

  • A. Place the supplied Notice Card and ID/Order Material(s) into the Plastic Zip Lock Bag, then place them into the vehicle’s glove compartment.

NOTE

  • A. Store the Wheel Lock Key and the vehicle lug nuts removed in step 1, into the clamshell package.

NOTE

  • A. Place the clamshell package in the proper location near the factory lug nut wrench, typically found in the cargo area of the vehicle. Make sure the package is securely placed to avoid any rattles/noise.

Visual Check

Item to be Checked

| Make sure each Wheel Lock is torqued to the factory specification.
---|---
| Make sure the Wheel Lock Key and vehicle lug nuts are properly stored in the clamshell package.
| Ensure the clamshell package is securely placed to avoid any rattles/noise.

Result

Wheel Locks torqued to factory specifications.|
---|---
Wheel Lock Key and vehicle lug nuts are properly stored.|
The Clamshell is securely placed in the vehicle.|

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals