Klipsch SUB 100 Label Subwoofer User Guide
- July 13, 2024
- Klipsch
Table of Contents
- Klipsch SUB 100 Label Subwoofer
- Product Information
- Product Usage Instructions
- KLIPSCH CONNECT PLUS APP
- ADD TO YOUR SYSTEM
- SYSTEM SETUP
- SUBWOOFER PLACEMENT
- ADJUSTING BASS LEVEL
- ADDITIONAL PERIPHERALS
- SOUND BAR CONTROLS
- IMPORTANT SAFETY INSTRUCTIONS
- FCC STATEMENT
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Klipsch SUB 100 Label Subwoofer
Product Information
Specifications:
- Model: AUDDI0 FLEXUSSUB 100
- Type: Subwoofer
- Brand: Authentic American
- KLIPSCH CONNECT PLUS APP compatible
Product Usage Instructions
Setup:
Place the subwoofer in the desired location in your entertainment setup.
Connect the subwoofer to your audio system following the provided
instructions.
Power On/Off:
To power on the subwoofer, press and hold the designated button for more than
1 second (Flexus Core). To power off the subwoofer, repeat the same action.
Adjusting Bass Level:
Use the provided controls to adjust the bass level according to your
preferences.
Klipsch Connect Plus App:
Download and install the Klipsch Connect Plus App on your smartphone by
scanning the provided QR code for enhanced functionality.
FAQ:
-
Q: How do I connect the subwoofer to my audio system?
A: Refer to the user manual for detailed instructions on connecting the subwoofer to your audio system. -
Q: How can I adjust the bass level on the subwoofer?
A: Utilize the controls on the subwoofer to adjust the bass level to your liking. -
Q: Is the Klipsch Connect Plus App necessary for using the subwoofer?
A: The Klipsch Connect Plus App provides enhanced functionality but is not mandatory for basic operation of the subwoofer.
KLIPSCH CONNECT PLUS APP
Scan the QR code for enhanced functionality. Scan the QR code for enhanced functionality.
ADD TO YOUR SYSTEM
Flexus Sound System is built to grow with you. Add up to two wireless
subwoofers and two wireless surround speakers to create a home theater.
For more information, please visit: klipsch.com/flexus-get-
started
INSIDE
SYSTEM SETUP
SUBWOOFER PLACEMENT
Corner placement will increase the amount of bass output. while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output.
SUBWOOFER RECONNECT
- Hold >1 Second (Sub)
- Pulsing
- Hold >1 Seconds (Flexus Core)
- Solid
ADJUSTING BASS LEVEL
RECOMMENDED PLACEMENT FOR DUAL SUBWOOFERS:
NIGHT MODE
ADDITIONAL PERIPHERALS
SOUND BAR CONTROLS
LED DISPLAY
| DISPLAY| BAR STATUS
---|---|---
OTHER| PAIRING| Peripheral pairing
PAIR FAILED| Subwoofer/surrounds failed to pair
SUB PAIRED| Subwoofer paired
POWER CONSUMPTION
INFORMATION OF POWER CONSUMPTION
SUB IN MODE| In this mode, when there is no signal output, the idle
power consumption is lower than 0.5W after 15 minutes.
WIRELESS MODE| In this mode, when there is no signal output, the
idle power consumption is lower than 0.5W after 15 minutes.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE ONLY with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
- REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
- To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
- The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable.
- DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
- The equipment shall be used at a maximum 113˚F / 45˚C ambient temperature.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
- WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
- WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instruction.
- WARNING: No naked flame sources – such as candles – should be placed on the product.
- WARNING: [Q] This equipment is a Class II or double insulated electrical appliance. II has been designed in such a way that it does not require a safety connection to electrical earth.
- WARNING: Do not place batteries in mouth or ingest. Chemical burn hazard. Keep new and used batteries out of reach of children and pets. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- WARNING: If battery compartment does not close securely, stop using the product and keep it away from children and pets.
- WARNING: Do not handle leaking or damaged Lithium batteries.
- WARNING: Risk of leakage. Only use the specified type of batteries. Never mix new and used batteries. Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place.
- WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
- WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- WARNING: Do not recharge non-rechargeable batteries.
- WARNING: Avoid exposure to extreme heat or cold.
- Please dispose of any used batteries properly, following any local regulations. Do not incinerate.
- WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch.
- WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the product’s warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer.
EU COMPLIANCE INFORMATION
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive
2014/35/EU; European Union EMC Directive 2014/30/EU; European Union
Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU;
European Union WEEE Directive 2012/19/EU; uropean Union Eco-Design Directive
2009/125/EC; European Union Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio
Equipment Directive (RED) 2014/53/EU.
This product contains batteries that are covered under the 2006/66/EC European
Directive, which cannot be disposed of with normal household waste. Please
follow local regulations.
You may obtain a free copy of the Declaration of Conformity by contacting your
dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact
information can be found here: http://www.klipsch.com/Contact-Us
WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU) and Norway.
This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
FCC STATEMENT
FCC AND CANADA EMC COMPLIANCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital
Device.
Caution: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
Caution: To comply with the limits of the Class B digital device, under
Part 15 of the FCC Rules, this device is to comply with Class B limits. All
peripherals must be shielded and grounded. Operation with non-certified
peripherals or non-shielded cables my result in interference to radio or
reception.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada statement:
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
WARRANTY
WARRANTY – U.S.
Klipsch Group, Inc., (KGI), 3502 Woodview Trace, Suite 200, Indianapolis,
Indiana (USA) 46268, warrants to the original retail purchaser that this
product will be free from defective materials and workmanship for two (2)
years from the date of purchase, subject to the limitations below. This
warranty period is not extended if we repair or replace the product. Except as
limited below, if this product proves defective in either material or
workmanship, KGI, at its option, will (a) repair the product, or (b) replace
the product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an
identical model, KGI at its sole option may replace the unit with a current
model of equal or greater value. In some cases, modification to the mounting
surface may be required where a new model is substituted. KGI assumes no
responsibility or liability for such modification. To obtain a repair or
replacement under the terms of this warranty, you must return the product to
the dealer from which it was purchased with your original receipt. If return
of the product to the dealer from which it was purchased is impossible, you
must contact our warranty service number at
1-800-554-7724 to arrange for the
return of the product to us or in-field destruction of the product at our
option, as well as provision of your original receipt to us. Return, repair,
and replacement shipping, liability, and cost is the responsibility of the
original retail purchaser.
Limitations:
- This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used by KGI’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from Klipsch Group, Inc. or an authorized dealer (See: www.klipsch.com/dealers).
- This limited warranty terminates if the original retail purchaser sells or otherwise transfers this product.
- This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Klipsch-authorized installer or dealer.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO COUNTRY. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. KGI’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WARRANTY STATEMENT. KGI DOES NOT ACCEPT LIABILITY FOR SPECIAL, PUNITIVE, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES OR LOSSES OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KGI MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY OUTSIDE
THE U.S.The Warranty on this product shall comply with applicable law when
sold to a consumer outside of the United States. To obtain any applicable
warranty service, please contact the dealer from which you purchased this
product, or the distributor that supplied this product.
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM
©2024, Klipsch Group, Inc. Klipsch Group, Inc. is a wholly-owned subsidiary of
Voxx International Cor poration.
Klipsch and Keepers of the Sound are trademarks of Klipsch Group, Inc.,
registered in the United States and other countries. The Bluetoottf> word mark
is a registered trademark owned by Bluetooth SIG, Inc. and any use of such
mark by Klipsch Group, Inc. is under license.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>