COLUMBUS P-7 Pro Professional HD GNSS Receiver User Guide
- July 13, 2024
- COLUMBUS
Table of Contents
COLUMBUS P-7 Pro Professional HD GNSS Receiver
CAUTION
Thank you for choosing our product.
This manual is intended to guide you through the safe and correct use of the
product and its accessories, avoiding improper operations that may result in
injury of yourself or any other person or cause device damage. As a precision
electronics, the product contains no component that can be repaired by your
own. Any attempt to disassemble the product will void the original
manufacturer’s warranty. The protection class of the external active antenna
is IP66, which can work normally in all-weather environments such as rain,
snow and high dust, but do not immerse the antenna completely in water. The
main unit of the P-7 Pro is not waterproof.
Parts Description
Power Lamp
Power on: Always on
Bluetooth Lamp
- Connected: always on
- Disconnected: off
The positioning status of the satellite needs to be viewed on the terminal device.
Steps to Use
- Connect the P-7 Pro to the external active antenna, and tighten the antenna connector clockwise.
- Place the external active antenna in a position with a good view of the sky, such as the roof of the car, the top of the surveying pole.
- The main unit of the P-7 Pro is not waterproof.
- The placement of the antenna significantly affects the accuracy of the tracks. For more placement suggestions, please visit: cbgps.com/p7/q
Connect to the Terminal Device
The P-7 Pro supports two connection modes: wired and wireless. Both connection modes are supported to connect the device simultaneously.
The operating systems and connection modes supported by the P-7 Pro are as follows:
Wired Connection
Plug the USB connector into the computer.
Plug the USB connector into the mobile device via an OTG cable. When wired, it
supports hardware-level dual serial ports: “Enhanced COM Port” and “Standard
COM Port”. The P-7 Pro can be accessed by two programs simultaneously, and the
parameters of the P-7 Pro can be configured through the Enhanced COM Port. How
to connect with terminal device please visit:
cbgps.com/p7/q
Bluetooth Connection
The P-7 Pro supports two Bluetooth protocols: BLE5.1 and SPP 2.1.
How to connect with the App, please visit:cbgps.com/p7/q
How to Use the App
The P-7 Pro supports applications for multiple platforms, please refer to the support page for usage. We will continuously update the list of supported App.
Specifications
- Protection class External Active Antenna IP66
- Operating temperature -20 °C to +50 °C / -4 °F to +122 °F
- Constellation GPS (L1+L5), GLONASS, Galileo (E1+E5a), QZSS (L1+L5), BeiDou, IRNSS (L5), SBAS
- Accuracy *
- Vertical: 15m
- Horizontal: 0.5m/CEP(50%), 1.5m/CEP(95%)
- Acquisition time * Reacquisition: <2s, Cold start: <34s
- Output sentences
- Protocol: NMEA-0183
- Baud Rate (Default): 57,600bps
- Messages: GNRMC, GNGGA, GNGSV, GNGSA
- (Default); GNGLL, GNVTG (Optional)
- Geodesics WGS84
- Update rate 1Hz (Default), 5Hz
- Bluetooth SPP 2.1 BLE 5.1
- Connectors
- Antenna connectors: SMA
- USB device: USB 2.0 Type-A
- Power consumption
- Main unit: DC 5V / 100mA
- Antenna: DC 3.3V / 20mA
- Dimensions (WxHxD)
- Main unit: 65×18×10mm / 2.6×0.7×0.4in
- Antenna feeder: 300cm / 9.8feet
- Weight
- Main unit: 21g / 0.74oz
- Antenna: 80g / 2.8oz
The test was done outdoor, in an open area. On content unmentioned in the instruction, please visit the official website at any time to learn about the latest use skill and information.
Trademark
is a trademark of Victory Co., Ltd. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of VICTORY is prohibited. Under no circumstances shall VICTORY be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>