comfee CFT23PW00A2 Table Fan Instruction Manual

comfee CFT23PW00A2 Table Fan

Specifications

• Product Model: CFT23PW00A2
• Voltage: 220-240V~
• Frequency: 50Hz
• Power: 25W

Product Information

Important Safeguards

• Always read the instruction manual carefully before using the product.
• Do not disassemble or open the rotor guard for cleaning. Unplug the fan before cleaning.
• Clean the fan enclosure and rotor blade guard with a slightly damp cloth.

Parts and Components Installation

• Name of Components: Front grill, Rear grill, Motor, Button, Blade, Lock nut of grill, Base cover
• Install by aligning the components as per the instructions provided in the manual.

Technical Data of the Product

• Product Model: CFT23PW00A2
• Voltage: 220-240V~
• Frequency: 50Hz
• Power: 25W

Operating Instructions

• Follow the instructions for horizontal swing, tilt adjustment, and other operational features as outlined in the manual.

Cleaning and Maintenance

• Clean the fan regularly with a dry cloth to remove dust and dirt buildup.

Troubleshooting

• Refer to the troubleshooting section in the manual for maintenance instructions and common issues.

FAQ

Q: Can I disassemble the rotor guard for cleaning?

A: No, do not disassemble or open the rotor guard for cleaning. Always unplug the fan before cleaning and use a slightly damp cloth to wipe the fan enclosure and rotor blade guard.

Q: How often should I clean the fan?

A: It is recommended to clean the fan regularly to maintain optimal performance. Use a dry cloth to remove dust and dirt buildup from the fan.

IMPORTANT SAFEGUARDS

CAUTION
Read Rules for Safe Operation and Instructions Carefully.

WARNING

CAUTION
Read Rules for Safe Operation and Instructions Carefully.

WARNING

• If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
• Correct Disposal of this product
• This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
• To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.
• Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without supervision.
• Indoor and household use only.
• When the fan was assembled, the rotor blade guard shall not be taken off anymore.
  • Prior cleaning unplug the fan.
  • The rotor guard shall not be dissembled/opened to clean the rotor blades.
  • Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

Rules For Safe Operation

• Never insert fingers, pencils, or any other object through the grille when fan is running.
• Disconnect fan when moving from one location to another.
• Be sure fan is on a stable surface when operating to avoid overturning.
• DO NOT use fan in window, rain may create electrical hazard.
• Indoor use only.

PARTS AND COMPONENTS

Name Of Components

PARTS AND COMPONENTS

Front and Rear Guard Installation

1. Align Screw Holes on the outer ring of both the Front and Rear Guards, with the Positioning Clip aligned as illustrated.
2. Press down all the Buckles to fasten the Front Guard with the Rear Guard. At the Screw Holes, tighten the separated screw and nut.

TECHNICAL DATE OF THE PRODUCT

PARTS AND COMPONENTS

OPERATION INSTRUCTIONS

Instructions For Operation Of Body

CLEANING AND MAINTENANCE

• Be sure to unplug from the electrical supply source before cleaning.
• Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap film with dry cloth.

TROUBLESHOOTING

Maintenance Instruction
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

• Before cleaning and assembling, fan must be unplugged.
• To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
• Please wipe the exterior parts with a soft cloth soaking a mild detergent.
• Do not use any abrasive detergent or solvents to avoid scratching the surface.
• Do not use any of the following as a cleaner: gasoline, thinner.
• Do not allow water or any other liquid into the motor housing or interior parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>