EDIFIER R1280Ts Multimedia Speaker User Guide
- July 13, 2024
- Edifier
Table of Contents
EDIFIER R1280Ts Multimedia Speaker
Product Information
Specifications:
- Total output power: 21W + 21W
- Frequency response: 52Hz – 20kHz
Product Usage Instructions
Power Input and Plug Type
The power input for the product is 100-240V~ 50/60Hz 300mA. Please note
that the plug type shown in the manual is for illustration purposes only.
Connecting a Subwoofer
The subwoofer is not included with the product. To connect it with a
subwoofer, you will need to use another suitable audio cable.
Warranty Information
For warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled
Warranty Terms. Contact details for warranty queries are provided based on
your region.
Contact Information
If you need more information about Edifier or have any further questions,
please visit the official website at www.edifier.com
EU Declaration of Conformity
The full text of the EU declaration of conformity can be found at the
following internet address: EU Declaration of
Conformity
EC REP for Bundled Battery
- Name: Starday S.r.l.
- Tel: +39.051.725410
- E-mail: info@stardaysrl.it
- Address: via Serra 34, Lippo di Calderara 40012, Calderara BO,
- Italy
FAQ
-
What is the total output power of the R1280Ts Multimedia Speaker?
The total output power of the R1280Ts Multimedia Speaker is 21W + 21W. -
Is a subwoofer included with the product?
No, the subwoofer is not bundled with the product. You will need to connect it using a suitable audio cable. -
Where can I find warranty information for Edifier products?
You can find warranty information by visiting the relevant country page on www.edifier.com and reviewing the Warranty Terms section.
What’s in the box
Note:
- Images are for illustrative purposes only and may differ from the actual product.
- For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.
Play control
Cable connection
Note:
- Power input: 100-240V~ 50/60Hz 300mA
- This plug type is meant for illustration purpose only.
- The subwoofer is not bundled. To connect it with a subwoofer, another suitable audio cable may be required.
- If two audio sources are connected, both source signals will play simultaneously.
- Power on: Switch the main power button on the rear panel of the active speaker to “On”.
- Power off: Switch the main power button to “Off”.
Battery replacement
Refer to the illustration to open the battery compartment, replace the CR2032 battery, and then close the compartment.
SPECIFICATION
- Total output power: 21W + 21W
- Frequency response: 52Hz – 20kHz
Learn More About EDIFIER
- To learn more about EDIFIER, please visit www.edifier.com
- For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms.
- USA and Canada: service@edifier.ca
- South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
- The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/global/eu-doc
ABOUT COMPANY
- Name: Starday S.r.l.
- Tel: +39.051.725410
- E-mail: info@stardaysrl.it
- Address: via Serra 34, Lippo di Calderara 40012,
- Calderara BO, ltaly