xdobo 8 MAX Bluetooth Speaker User Manual
- June 15, 2024
- xdobo
Table of Contents
Bluetooth Spearker
XDOBO X8 Max
MANUAL
Quick Start Guide
Warning
- There may be noise when playing some songs with strong bass when the battery is low. This is a normal phenomenon. Please ensure that the X8 Max has enough power to maintain performance.
- Do not use any fast charger or PD charger or GaN charger or quick charger exceed 5V-3A output.
- XODBO X8 Max is IPX5 waterproof. Do not expose XDOBO X8 Max to water while charging.
- As doing so may result in permanent damage to the speaker or power source.
What is TWS?
TWS means true wireless stereo. Let’s say twoBluetooth speaker are able to be
paired and playing music synchronously.
How to pair your device?
- Please make sure these two speaker to be paired disconnect from your bluetooth device before you turn them on. Then please turn on two speakers
- Select either speaker. Short press” “to enter TWS status.
- When successfully paired, The LED indication light on either speaker will stay blue, and the other speaker will flash blue.
- Find “XDOBO X8 Max” on your device, select it and connect.
- In the mode of TWS function, Short press” “to disconnet.
Function key
Key | Operation | Instruction |
---|---|---|
Short press | Turn on | |
Long press | 1.Turn off |
2.Long press for 8s to restart, if system halted
| Short press| Mode change:BT/TF/USB/AUX
Long press| Long press 55 to restore factory settings
| Short press| 1.Short press to enter in to the TWS function
2.In the mode of TWS function, short press to disconnect.
| Short press| Sound change:
Full frequency-Vocal-Bass
| Short press| Wake siri
| Short press| 1:Play /Stop
2:Answer calls/Hang up 3:Quick double click to dial the last number
Long press| Disconnect / reject answering
| Short press| Volume down, 16 degrees in total
Long press| Previous track
| Short press| Volume up, 16 degrees in total
Long press| Next Track
Overview
LED indication
Status | LED indication |
---|---|
Pairing mode | Blue light |
Bluetooth connected | Blue light |
TF/USB/AUX play | Blue light |
Full frequency | White light |
Vocal | Green light |
Super bass | Blue light |
Charging | Red light |
Full Charged | Red light |
TWS Mode | Yellow light |
TWS connected | Yellow light |
Bluetooth pairing
When speaker is powered on, the blue LED will blink.
Find “XODBO X8 Max” on your device and select to pair.
Specifications
- Bluetooth version: 5.0
- Output Power: 100W RMS
- Frequency response: 20hz-20kHZ
- Signal-to-noise ratio: 75dB
- Battery type: 3.7V / 20000mAh
- Battery charge time: About 8 hours
- Input Power : Type-c 5V / 3A
- Music playing time: Up to 12 hours (varies by volume level and audio content)
- Dimensions(LxH xW):300 100x 134(mm)
- Weight: 2860g
Performance optimization
The speaker usage time will vary depending on the volume and song.
Playing loudest and playing heavy bass songs will speed up battery consumption.
(1) When the X8 Max is tuned to the maximum sound, it will protect the speaker
components, including the optimization of battery durability and playback
time.
(2)That is, in order to play longer and reduce battery consumption, the
balance of the tone will be adjusted appropriately, including the adjustment
of the bass, treble and vocal parts.
(3)Therefore, the loudest and medium-volume heavy bass levels are different.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
followingmeasures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2BA7P-XDOBOX8MAX
Deep Bass Soul Leader
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>