Ingersoll Rand RTS Series Mechanical Pulse Tool Instructions
- July 14, 2024
- Ingersoll Rand
Table of Contents
TL-RTS-PIM
Edition 2
June 2024
Mechanical Pulse Tool
RTS Series: RTS025PQ4, RTS060PH6, RTS060PH8, RTS060PS6, RTS060PS8,
RTS140PH8, RTS140PS8, RTS225PH8 and RTS225PS8
Product Information
Save These Instructions
[1]
[2]
[3]
= 75-100%
= 50-75%
= 25-50%
= <25%
TL-RTS-PIM_ed2
Product Safety Information
Intended Use: These Mechanical Pulse Tools are designed to remove and install threaded fasteners.
WARNING
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this pulse tool. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Responsibly recycle or dispose of batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause personal injury.
- Only use tools with appropriate voltage Ingersoll Rand batteries and charger. Use of any other batteries may create a risk of fire, personal injury or property damage.
For additional information, refer to Mechanical Pulse Tool Safety Manual Form TL-RTS-SIM, Battery Charger Safety Information Manual Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrand.com
Product Specifications
Models| Voltage| Battery Models| Style| Drive|
Retainer Type| Maximum Free Speed| No Load Speed| Pulses per
Minute
---|---|---|---|---|---|---|---|---
V, DC| Type| Size| rpm| Torque Level: rpm| ppm
RTS025PQ4| 20| | | Hex| 1/4″| Quick-Change | 2,700| 1-5: 1,800
6-40: 1,900| 3,600-3,800
RTS060PH6| Square| 3/8″ | Hog Ring/Thru Hole | 1-40: 1,800| 3,600
RTS060PH8| 1/2″
RTS060PS6| 3/8″ | Pin Detent
RTS060PS8| 1/2″
RTS140PH8| Hog Ring/Thru Hole
RTS140PS8| Pin Detent
RTS225PH8| Hog Ring/Thru Hole
RTS225PS8| Pin Detent
Models| Fastener Size| Torque Range| Flush Detection
Modes| Sound Level dB(A) (EN 62841)| Vibration (m/s²) (EN 62841)
---|---|---|---|---|---
Nm| ft-lb| in-lb| † Pressure (L p)| ‡ Power (L W)|
Level| * K
RTS025PQ4| M6-M8| 8-25 | 6-18| 70-220| L1-L7| 92.0| 100.0 | 10.7| 3.4
RTS060PH6| M8-M10| 12-60| 9-44| 105-530 | 94.0| 102.0| 10.5| 1.8
RTS060PH8
RTS060PS6
RTS060PS8
RTS140PH8| M10-M14| 30-140| 22-103| 265-1240| 95.0 | 103.0| 11.0| 1.6
RTS140PS8
RTS225PH8| M12-M18| 60-225| 44-165 | 530-2000 | 14.8 | 2.7
RTS225PS8
† KpA = 3dB measurement uncertainty
‡ KWA = 3dB measurement uncertainty
- K = Vibration measurement uncertainty
Conforms to UL STD. 62841-1 and 62841-2-2.
Certified to CSA STD. C22.2 No. 62841-1 and 62841-2-2.
4000415
WARNING
Sound and vibration values were measured in compliance with internationally recognized test standards. The exposure to the user in a specific tool application may vary from these results. Therefore, on site measurements should be used to determine the hazard level in that specific application.
CAUTION
-
This device complies with Part 15 of the FCC Rules/Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced Radio/TV technician for help. -
To satisfy FCC/IC RF exposure requirements, a separation distance of 25 mm or more should be maintained between the antenna of this device and persons during device operation.
-
To ensure compliance, operations at closer than 25 mm distance is not recommended.
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An excessive accumulation of grease will result in sluggish operation. See drawing TL-RTS- PIM-1 and table below.
- (Dwg. TL-RTS-PIM-1)
IR #
105
Parts and Maintenance
Tool repair and maintenance should only be carried out by an Authorized
Service Center.
Refer all communications to the nearest Ingersoll Rand Office or
Distributor.
Environmental Protection
When life of Ingersoll Rand electrical product has expired, it must be recycled in accordance with all applicable standards and regulations (local, state, country, federal, etc.). Improper disposal may endanger environment.
Symbol Identification
Return waste material for recycling.
Do not dispose of this product with household waste material.
Product contains Lithium-ion. Do not dispose of this product with household waste material.
Original instructions are in English. Other languages are a translation of the original instructions.
Notes:
ingersollrand.com
© 2024 Ingersoll Rand
Documents / Resources
|
Ingersoll Rand RTS Series Mechanical Pulse
Tool
[pdf] Instructions
RTS025PQ4, RTS060PH6, RTS060PH8, RTS060PS6, RTS060PS8, RTS140PH8, RTS140PS8,
RTS225PH8, RTS225PS8, RTS Series Mechanical Pulse Tool, RTS Series, RTS Series
Pulse Tool, Mechanical Pulse Tool, Pulse Tool, Mechanical Pulse Wrench, Pulse
Wrench, Pulse, Wrench
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>