HUNTER 30079 Air Purification System Instruction Manual

July 12, 2024
Hunter

HUNTER 30079 Air Purification System

Specifications

  • Brand: HUNTER
  • Model: 30079
  • Dimensions: Refer to the user manual for detailed dimensions
  • Power Supply: 120V electrical outlet

Product Usage Instructions

  • Setting Up Your Air Purifier:
    • Remove the air purifier from the box and take it out of the protective bag.
    • Open the front grill before turning the Air Purifier on.
    • Confirm that the carbon pre-filter covers the grill vents inside the front grill.
    • Replace the filter and front grill ensuring proper alignment of the tabs.
    • Plug the unit into a 120V electrical outlet.
  • Operating Your Air Purifier:
    • On/Speed Control: Rotate the Speed Control knob to set the desired speed (0 for off, 1 for low, 2 for medium, and 3 for high).
    • Ionizer: Press the button to activate the ionizer; the green light will illuminate when it’s on.
    • Pre-Filter and Filter Timers: To reset the timers, change the filter as per maintenance instructions and hold the filter reset key for three seconds to turn off the indicator lights.

FAQs

  • Q: Can I place the Air Purifier on an uneven surface?
    • A: No, always ensure to place the Air Purifier on a firm, level surface for proper functionality.
  • Q: How often should I change the filter?
    • A: Refer to the maintenance section in the manual for guidance on when to change the filter based on usage.

MODELS

HUNTER-30079-Air-Purification-System-FIG-1 \(1\)

Air Purifier Model| HEPAtech ®| Filter| Pre- Filters
---|---|---|---
30078| 30928| 30901
30079| 30928| 30901
30212| 30931| 30901
30213| 30931| 30901

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER AND SAVE THESE IMPORTANT INSTRUCTIONS

  1. This Air purifier er is designed for use on a flat, level surface and may not work properly on an uneven surface. ALWAYS place this Air Purifier on a firm, level surface. ALWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.
  2. Place the Air Purifier in an area that is out of the reach of children.
  3. Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged.
  4. This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature.
  5. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned.
  6. DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.
  7. DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions.

Introduction

  • Thank you for purchasing the HEPAtech® Air Purification System from Hunter Fan Company. You have purchased our latest development in portable Air Purifi cation Systems. This system has been developed to improve the quality of the air you breathe.
  • Our HEPAtech® Air Purification System outperforms other air purification systems by quickly and effectively removing dust, smoke, and pollen particles as small as .1 microns in size. Room air is pulled in through the front grill and cleaned across the HEPAtech® filter. Clean air is then released out of the top grill to avoid stirring up settled particles.

Using the Ionizer

  • Using the ionizer improves the quality of air in the room. Negative ions are released into the air and positively charged dust, smoke, and pollen particles are attracted to the negative ions. These particles settle out of the air and can be vacuumed up during normal cleaning.
  • These particles are also more easily captured by the HEPAtech® filter as they pass through the HEPAtech® Air Purification System. To ensure the best air circulation in the room, we recommend that you place your air purifier six inches away from any walls.

Setting Up Your Air Purifier

  1. Remove your air purifi er from the box and take it out of the clear plastic protective bag.
  2. Place your HEPAtech® Air Purifi er on a fi rm, fl at floor.
  3. Before turning the Air Purifi er ‘on,’ open the front grill.
    • For Models 30078 & 30079: To release the front grill, press the buttons on the side until the front grill slides easily over the buttons. (Refer to Figure 1.)
    • For Models 30212 & 30213: To release the front grill, place your fingers behind the tabs and pull forward. (Refer to Figure 2.)
  4. Next, check the HEPAtech® filter by pressing fi rmly on all four corners of the filter to ensure that it is fully inserted into the filter opening.
  5. The carbon pre-filter is mounted inside of the front grill with “hook” tape. Con-fi rm that it covers the grill vents. (Refer to Figure 3.)
  6. Place the filter installation reminder sticker on the inside edge of the front grill. Circle the month and write the year of installation for the pre-filter and HEPAtech® filter.
  7. Replace the filter and front grill. Be sure that the bottom grill tabs are in position fi rst, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation.
    • NOTE: This unit will not operate unless the door is placed in the correct position.
  8. Plug the unit into a 120V electrical outlet.

AIR PURIFIER PARTS

HUNTER-30079-Air-Purification-System-FIG-1 \(2\)

Operating Your Air Purifi er

  • On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time.
  • Ionizer: Press this button to turn ‘on’ the ionizer. When the ionizer is ‘on’, the green light near the button will be illuminated.

Pre-Filter and Filter Timers

This air purifi er contains timers that indicate when the pre-filter and filter should be changed. The timer automatically counts the number of hours that each filter has been in use. When the pre-filter counter reaches 1400 hours (approximately three months of use), the pre-filter indicator will be lit to show that the pre-filter should be changed. When the HEPAtech® filter counter reaches 2800 hours (approximately four to six months of use), the HEPAtech® filter indicator will be lit to indicate that the filter should be changed. The exact life of the pre-filter and filter will depend upon the environment. If necessary, the filters should be changed more frequently.

The reset the prefilter or filter timers when one indicator (or both) is lit:

  1. Change the filter and/or pre-filter as described in the Maintenance section of the manual.
  2. To reset the counter to zero hours and turn off the indicator, simply press and hold the filter reset key for three seconds. If both the pre-filter and filter indicators are lit, the reset key will fi rst turn off the pre-filter indicator. Then, you must release the reset key and then press and hold the filter reset key again for three seconds to turn off the filter indicator.

The reset the pre-filter or filter timers before the indicators are lit:
In some environments, you may want to change the pre-filter or filter more frequently than indicated by the filter indicators. This procedure allows you to reset the pre-filter or filter counter before the indicators are lit.

  1. Change the filter and/or pre-filter as described in the Maintenance section of the manual.
  2. Now, you must choose which timer you want to reset. Press and hold the filter reset key (approximately three seconds) until the pre-filter indicator fl ashes. Press the reset key again to alternate between the two indicators. The timer that will be reset is designated by the fl ashing indicator.
  3. Once you have the correct indicator fl ashing, press and hold the reset key for three seconds to reset that timer to zero hours. The indicator will stop fl ashing when it has been reset. If needed, repeat these steps to reset the other timer.

Cleaning and Filter Replacement

  1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Remove the pre-filter before cleaning the front grill.
  2. At least every 90 days, replace the carbon pre-filter. This is necessary to maintain proper odor removal and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it in the Air Purifi er.
  3. While replacing the pre-filter, you should view the condition of the HEPAtech® Filter. Compare the filter to the color-coded chart that is on the inside of the house. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Mark the new filter installation sticker included with the new HEPAtech® Filter. Depending on use and environment, the HEPAtech® Filter should last four to six months.
  4. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the top of the filter. The new filter will be installed with the same orientation. Once removed, the used filter can be discarded.
  5. Remove the new filter from its wrapping and look at the directional arrows printed on the side of the filter. Install the filter with arrows pointing toward the unit. Press the filter fi rmly into the air purifi er. To avoid damaging the filter media, you should press on the frame of the filter only.
  6. If you notice a decrease in air output or an increase in noise, the HEPAtech® Filter may be clogged. Replace it with a new HEPAtech® Filter.

Replacement Filters

To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter for your nearest retailer or Hunter Customer Service at (US) 1-888-830-1326, (Canada) 1-888-855-8300. Please be prepared to tell the operator the model number of your Air Purifi er and the model number of the filter you need to replace. Visit our website at www.hunterfan.com.

  • Hunter Air Purifi er Model No.: 30078 30079 30212 30213
  • Pre-Filter Replacement Model No.: 30901 30901 30901 30901
  • HEPAtech® Filter Replacement Model No.: 30928 30928 30931 30931

How the HEPAtech

How the HEPAtech® Air Purification System Works

As the air is pulled into the purifier, the activated carbon pre-filter absorbs odors and catches large particles. Then, the air travels through the HEPAtech® filter where the smaller particles are collected. Then, the ionizer releases negative ions into the air that attract positively charged dust, smoke, and pollen particles. Finally, the clean, purified air is released back into the room.

Other Home Comfort Products from Hunter

  • Hunter Original®
  • The Care-Free Humidifi er™
  • Programmable Thermostat

To learn more about Hunter Fan Company products, please see our Web page at:www.hunterfan.com.

WARRANTY

Hunter Fan Company HEPAtech® Air Purification System 5-YEAR LIMITED WARRANTY

  • The Hunter Fan Company makes the following limited warranty to the original residential user or consumer purchaser of the HEPAtech® Air Purification System:
  • If any part of your HEPAtech® Air Purification System (“Air Purifier”) motor fails during the first five (5) years from the date of installation due to a defect in material or workmanship, we will provide a replacement Air Purifier free of charge. Installation is deemed to occur at the date if purchase.
  • If the Air purifier er cord, ionizer, or front grill fails any time within one (1) year after installation due to a defect in material or workmanship, we will replace or, at our option, repair the unit free of charge at our nearest service center or at our Service Department in Memphis,
  • Tennessee. You will be responsible for all parts and labor costs after this one year.
  • THE USE OF A NON-HUNTER FILTER WILL INVALIDATE THIS WARRANTY. IF THE ORIGINAL RESIDENTIAL USER OR CONSUMER PURCHASER CEASES TO OWN THE AIR PURIFIER, THIS WARRANTY AND ANY IMPLIED WARRANTY THAT THEN REMAINS IN EFFECT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED.
  • NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE CONCERNING THE FILTER MATERIAL OR CARBON FILTER. THIS WARRANTY IS INSTEAD OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO THE MOTOR IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE. This warranty is voided if the air purifier is not purchased and used in the USA or Canada. This warranty excludes and does not cover defects, malfunctions, or failures of the Air
  • Purifiers that were caused by repairs by persons not authorized by us, use of parts or accessories not authorized by us, mishandling, modifications, or damage to the Air Purifier while in your possession, or unreasonable use, including failure to provide reasonable and necessary maintenance. This warranty does not cover Air Purifiers used in commercial applications.
  • There are no express or implied warranties as to commercial purchasers or users.
  • To obtain service, contact the nearest Hunter authorized service center or the Hunter Fan Company Service Department, 2500 Frisco Avenue, Memphis, Tennessee 38114, 901-248- 2222. For the name of our nearest authorized Hunter Fan Company Service Centre, write to the Hunter Fan Company at the preceding address. You will be responsible for insurance and freight or other transportation to our factory service center. We will return the Air
  • Purifier freight prepaid. The Air Purifier should be properly packaged to avoid damage in transit since we will not be responsible for any such damage. Proof of purchase is required when requesting warranty service. The purchaser must present a sales receipt or other document that establishes proof of purchase.
  • IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES OVER THE PURCHASE PRICE OF THE AIR PURIFIER. YOUR SOLE REMEDY WILL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE.
  • SOME AMERICAN STATES AND CANADIAN PROVINCES DO NOT ALLOW:
    • LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS;
    • THE EXCLUSION OR LIMITATION OF DIRECT, INDIRECT SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES;
  • SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
  • THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

MORE INFO

  • Hunter Fan Company
  • 2500 Frisco Avenue
  • Memphis, Tennessee 38114
  • USA
  • Printed in China & Taiwan
  • ©2005 Hunter Fan Company

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hunter User Manuals

Related Manuals