PEDROLLO VX 8-35 Submersible Pumps Instructions
- July 11, 2024
- pedrollo
Table of Contents
VX VORTEX
Submersible pumps
※ The Go-To Pump for Demanding Conditions and Performance Requirements
PERFORMANCE RANGE
- Flow rate up to 750 l/min (45 m3/h)
- Head up to 15.5 m
INSTALLATION AND USE
VX pumps are renowned for their reliability, especially in automated fixed installations.
Ideal for domestic, civil, and industrial settings, they efficiently handle suspended solids up to 50 mm in diameter, including in groundwater, surface water, and sewage.
They are also perfect for pumping out flooded areas like basements, underground parking garages, car wash stations, and emptying septic tanks and sewage systems.
※ The VORTEX impeller can handle solids up to 50 mm in diameter. Its unique
design ensures safe operation against clogging.
INCLUDES
※ Power cable length:
– 5 m for VX 8 and VX 10
– 10 m for VX 15 and VX 20
※ Float switch (exclusive to single-phase models)
APPLICATION LIMITS
-
Depth below water level up to 5 m (with an appropriately sized power cable)
-
Liquid temperature up to +40 °C
-
Suspended solids transfer:
– up to Ø 40 mm for VX /35
– up to Ø 50 mm for VX /50 -
Minimum immersion for continuous service:
– 290 mm for VX 8 and VX 10
– 330 mm for VX 15
– 360 mm for VX 20
AVAILABLE UPON REQUEST
※ Pumps with 10 m power cable for VX 8 and VX 10
※ Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- Patent No. EP2313658
- Patent No. IT0001428923
CURVES AND PERFORMANCE DATA
ABSORPTION
| TYPE Single-phase | VOLTAGE 230 V |
|---|---|
| VXm 8/35 | 4.3 A |
| VXm 10/35 | 5.5 A |
| VXm 15/35 | 7. 0 A |
| VXm 20/35 | 9.6 A |
| VXm 8/50 | 4.3 A |
| VXm 10/50 | 5.5 A |
| VXm 15/50 | 7. 0 A |
| VXm 20/50 | 9.6 A |
| TYPE Three-phase | VOLTAGE 400 V |
| VX 8/35 | 1.6 A |
| VX 10/35 | 2.2 A |
| VX 15/35 | 2.7 A |
| VX 20/35 | 3.7 A |
| VX 8/50 | 1.6 A |
| VX 10/50 | 2.2 A |
| VX 15/50 | 2.7 A |
| VX 20/50 | 3.7 A |
DIMENSIONS AND WEIGHT
PALLET CAPACITY
| Single-phase | Three-phase | NO. OF PUMPS |
|---|---|---|
| VXm 8/35 | VX 8/35 | 45 |
| VXm 10/35 | VX 10/35 | 45 |
| VXm 15/35 | VX 15/35 | 30 |
| VXm 20/35 | VX 20/35 | 30 |
| VXm 8/50 | VX 8/50 | 45 |
| VXm 10/50 | VX 10/50 | 45 |
| VXm 15/50 | VX 15/50 | 30 |
| VXm 20/50 | VX 20/50 | 30 |
MATERIALS AND COMPONENTS
-
Pump body Cast iron with cataphoresis treatment for greater corrosion resistance with ISO 228/1 threaded port
-
Base Stainless steel AISI 304
-
Impeller VORTEX type in AISI 304 stainless steel.
-
Motor sleeve Stainless steel AISI 304
-
Motor cover AISI 304 stainless steel for VX 8-10 Cast iron with cataphoresis treatment for VX 15-20
-
Motor shaft Stainless steel AISI 431
-
Double mechanical seal in oil chamber Seal Shaft Location
MG1-14D SIC Ø 14 mm Motor side Pump side
Materials
Silicon carbide / Graphite / NBR
Silicon carbide/Silicon carbide/NBR -
Capacitor (exclusive to single-phase models)
-
Electric motor
VXm: single-phase 230 V – 50 Hz with winding integrated thermal motor protection
VX: three-phase 400 V – 50 Hz
– Insulation: class F
– Protection rating: IP X8 -
Power cord
Power cable encapsulated with epoxy resin both in the grommet area and where the conductors exit the sheath, for absolute insulation against moisture and water.
Type ‘H07 RN-F
(Schuko plug exclusive to single-phase models)
※ Standard length 5 metres (10 metres for VX 15 and VX 20) -
Float switch (exclusive to single-phase models)
-
Tilting device for the float cable (exclusive to single-phase models)
Patent No. IT0001428923 -
Power cable strain relief
Patent No. EP2313658
Sewage
Domestic use
Civil use
Industrial use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>