DESERT STEEL Saguaro Torch Cactus User Manual
- July 10, 2024
- DESERT STEEL
Table of Contents
DESERT STEEL Saguaro Torch Cactus
Product Specifications:
- Torch Base (A) x1
- Torch Top (B) x1
- Torch Arms (C) x2
- Baseplate (D) x1
- Self Tapping Screws (E) x3
- Wing Nuts (F) x4
Product Usage Instructions
Assembling the Saguaro Torch:
- Attach torch base (A) to baseplate (D) by lining up the holes in the torch base with the tabs on the baseplate.
- Insert screws and secure with wing nuts (F) from the inside of the torch base.
- Line up holes at the bottom of the torch top (B) with the holes at the top of torch base (A).
- Connect torch top with torch base and secure with 3 self-tapping screws (E).
- Connect torch arms (C) to the body by lining up the tabs on the arms with the slots in the body.
- Press the arms in and ensure they are secure by pressing down on them.
Using the Saguaro Torch:
Place tiki canisters in the arms and top of the saguaro torch.
Frequently Asked Questions (FAQ):
-
Q: How do I replace the tiki canisters in the Saguaro Torch?
A: To replace the tiki canisters, simply lift off the torch top and arms, remove the old canisters, and place new ones in their position. Secure the torch top and arms back in place. -
Q: Can I use the Saguaro Torch indoors?
A: The Saguaro Torch is designed for outdoor use only due to its open flame and should not be used indoors.
Contents
Assembly
-
Attach torch base (A) to baseplate (D) by lining up the holes in the torch base with the tabs on the baseplate inserting the screws & securing with wing nuts (F) from the inside of the torch base.
-
Line up holes at the bottom of the torch top (B) to the holes at the top of torch base (A).
Connect torch top with torch base and secure with 3 self tapping screws (E)
-
Connect torch arms (C) to the body by lining up the tabs on the arms with the slots in the body, pressing the arms in and sure by pressing down on the arms. -
Place tiki canisters in the arms and top of the saguaro torch.
