Desert Steel Saguaro Flower Instructions
- May 15, 2024
- DESERT STEEL
Table of Contents
Desert Steel Saguaro Flower
Product Information
Specifications:
- Product Name: LED Lighting & Saguaro Flower
- Manufacturer: DESERT STEEL
- Power Requirement: 12V
Product Usage Instructions
Installation Steps:
- Pull cable out of Saguaro arm(s).
- Split cable at connection point and place it in the grooves.
- Tighten the cap nut, allowing the pin to pierce the cable.
- Strip the light wire by 1/4 and pass it through the pipe nut.
- Place the wire into the hole with core and tighten the pipe nut securely.
- Pull the wire to check the connection.
- Bend down tabs on outer rings of the flower cluster or circle plate. These tabs should slide under the lip of the arm.
- Bend down the skinny tab on the bottom of the plate and run it through the hole in the bracket.
- Pull the wire out of the bottom of the Saguaro and hook it to a 12V low voltage transformer.
FAQ:
-
Q: What should I do if the lights are not turning on after installation?
A: Check the connection points to ensure they are secure. Verify that the power source is functioning properly. If issues persist, contact customer support for further assistance. -
Q: Is the product weather-resistant?
A: Yes, the LED Lighting & Saguaro Flower is designed to be weather-resistant, but it is recommended to take necessary precautions during extreme weather conditions.
LED Lighting & Saguaro Flower Manual
Included
- 12V low voltage spotlight, 3 watts/ea.
- 2 wire nuts/light for Saguaro installation
- Saguaro flower cluster/circle plate
Needed
Low voltage transformer (min. 50 watts)
Instructions
- Pull cable out of Saguaro arm(s). Split cable at connection point, place in grooves.
- Tighten cap nut. Pin will pierce the cable.
- Strip the light wire 1/4” and pass it through the pipe nut.
- Place wire into the hole with core and tighten pipe nut.
- Pull wire to check connection.
- Bend down skinny tab on bottom of plate and run through hole in bracket.
- Bend down tabs on outer rings of flower cluster or circle plate. These tabs slide under the lip of the arm.
- Pull wire out of bottom of saguaro and hook to a 12v low voltage transformer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>