elinz RVDWRL 720P HD 5 Inch Digital Wireless Backup Camera Kit User Manual
- July 10, 2024
- ELInZ
Table of Contents
- elinz RVDWRL 720P HD 5 Inch Digital Wireless Backup Camera Kit
- Monitor Specifications
- Camera Specification
- Brief Introduction
- SPLIT MODE
- Parking Lines
- INSTALLATION
- Wiring for backup camera and side camera
- Wiring diagram
- Installation Diagram
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
elinz RVDWRL 720P HD 5 Inch Digital Wireless Backup Camera Kit
Thank you for purchasing our product, please read this user manual first before operating it, welcome to contact us if you need any assistance.
Feature
- 2.4G Digital wireless technology, no interference and easy installation.
- High brightness led display with built-in wireless receiver.
- Wireless transmitter can work with any analog backup camera or cctv surveillance camera.
- 120 ms time delay only, quick response time like wired backup camera system.
- Working Frequency: 2400- 2483MHz.
- Image up/down/,normal/mirror flip function.
- 2CH split display mode, support 2wireless camera working at the same time.
- Monitor working voltage:DC12V-30V, camera working voltage: DC12V-30V
Monitor Specifications
- Screen Size: 5 inch
- Display Screen: IPS panel
- Resolution: 800(RGB)480
- Brightness: 400cd/m2
- Contrast: 400:1
- Consumption: 2W
- Power Supply: DC12V-30V
- Operation Frequency:2400 – 2483MHz
- Line of Sight Range:>150m
Camera Specification
- Image Sensor: HD 1/3 Color CMOS
- Horizontal Resolution: 800 TVL
- Pixels:960*576
- View Angle:120°
- Working Voltage: DC12V-30V
- Waterproof Rate: IP68
- Operation Frequency:2400 – 2483MHz
- Line of Sight Range:>150m
Brief Introduction
PAIR
(The camera and monitor were paired already, you just need to power them.)
PICTURE
MIR-FLIP
MIR-FLIP: Press the “REC ” key to enter NORMAL/MIRROR/FLIP/MIR-FLIP.
SYSTEM
Press “-“or ”+”to select SYSTEM, press ‘/:\” to enter
SPLIT MODE
Parking Lines
INSTALLATION
- Drill 2 holes at the rear of your RV to fix the camera.
- Screw the camera antenna.
- Connecting the camera’s power wire to the reversing light’s power wire.
- Clean the windshield, and mount the suction cup to fix the monitor at the proper place.
- Plug the cigarette lighter into the car cigarette lighter’s socket to power on the display.
Wiring for backup camera and side camera
Wiring diagram
Installation Diagram
Read User Manual Online (PDF format)
Loading......