Lowes FX-50028W Putnik Chandelier 8 Light Black Modern Instruction Manual
- July 10, 2024
- lowes
Table of Contents
Lowes FX-50028W Putnik Chandelier 8 Light Black Modern
Product Specifications
- Model: LEFX-0508 / FX-50018C / FX-50028W
- Socket Type: E12
- Maximum Wattage : 40 Watts per bulb
- Number of Bulbs: 8 (bulbs not included)
- Usage : Indoor
Product Usage Instructions
- Screw eight fixture arms (H) to lamp assembly (G).
- Pass the wires through the tubes (D) and canopy (C). Tighten the lamp body, tube (D), and canopy (C).
- Remove the mounting bracket (A) from the canopy (C). Attach mounting bracket (A) to outlet box (not included) with screws supplied.
- Make electrical connections using wire nuts (B).
- Attach the canopy (C) to the mounting bracket (A) and screw it with canopy screws (E).
- Install the light bulb (not included).
- Install the glass shade (F) and secure it with thumb screws. Repeat this process with all 8 of the fixture arms.
FAQ
- Q: What is the maximum wattage for each bulb in the chandelier?
- A: The maximum wattage for each bulb is 40 Watts.
- Q: How many bulbs does the chandelier require?
- A : The chandelier requires 8 E12 Socket 40-watt maximum candelabra light bulbs or LED equivalent bulbs.
- Q : Can this chandelier be used outdoors?
- A : No, this lighting fixture is meant for indoor use only.
- Q : Are the bulbs included with the chandelier?
- A: No, the bulbs are not included. You will need to purchase them separately.
WARNING:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- Check for electric, gas, & plumbing lines before drilling or consult a professional.
- Turn off your electricity at the circuit breaker or main fuse box before installation.
- Do not restore power to the line until fully installed
- Do not exceed the recommended wattage.
- Always allow bulbs to cool for 10 minutes before changing.
This fixture has been rated for up to eight (8) E12 Socket 40-Watt maximum candelabra light bulbs or LED equivalent bulbs (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE. The lighting fixture is meant for indoor use.
INSTALLATION INSTRUCTION
Pls read the installation instructions carefully and follow the steps
- Screw eight fixture arms (H) to lampassembly (G).
- Pass the wires through the tubes (D)and canopy (C). Tighten the lamp body, tube (D), and canopy (C).
- Remove the mounting bracket (A) from the canopy (C). Attach mounting bracket (A) to outlet box (not included)with screws supplied.
- Make electrical connections using wire nuts (B).
- Attach the canopy (C) to the mounting bracket (A) and screw it by canopyscrews (E).
- Install the light bulb (not included).
- Install the glass shade (F) and secure it with thumb screws. Repeat this process with all 8 of the fixture arms.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>