Shenzhen Hangshi Technology HB342 Wireless Keyboard with Detachable Case for iPad Mini 6 User Manual
- June 6, 2024
- Shenzhen Hangshi Technology
Table of Contents
Wireless Keyboard
with Detachable Case for iPad mini 6
User Manual
Package Contents
1 x Wireless Keyboard with Detachable Case
1 x Charging Cable
1 x User Manual
Specifications
| Bluetooth Version | Bluetooth 5.1 |
|---|---|
| Operating Range | ＜10m |
| Working Voltage | 3.7V |
| Working Current | 2mA |
| Charging Current | 200mA |
| Stand-by Time | 90days |
| Charge Time | ＜2hours |
| Uninterrupted Work Time | 92hours |
| Lithium Battery Capacity | 280mAh |
| Frequency Band | 2400 to 2483.5 MHz |
| Maximum Radio-frequency power | 0 dBm |
Product Overview
-
Bluetooth indicator: Flashes blue when pressing “Fn + C”.
Caps Lock indicator: Blue light is on. -
Charging indicator: Red while charging. Green when fully charged.
Low battery indicator: Flashes red when charging is required. -
Charging port: Only used for charging.
Keys and Function
| Home| | Brightness –| | Brightness +|
---|---|---|---|---|---|---
| Select all| | Copy| | Paste|
| Cut| | Select
Language| | Previous
track|
| Play/Pause| | Next track| | Volume –|
| Volume +| | Lock screen| | Keyboard
display|
| Power Display| | | | |
Pairing Instructions
Step 1. Switch On/Off to On to turn your keyboard on.
Step 2. Press the “Fn + C” keys together to enter pairing mode.
Step 3. Verify your device’s Bluetooth® settings are on. Select Settings –
Bluetooth – On.
Step 4. Select “Bluetooth Keyboard” from your device’s list of available
devices to complete pairing.
Step 5. Select “Bluetooth Keyboard”, the indicator will turn off after
successfully paired.
Notes:
- Only one device can be actively paired at a time.
- After a successful pairing, your device will automatically reconnect to the keyboard when it is switched on.
- In case of connection failure, delete the pairing record from your device, and try the pairing instructions again.
Charging
- Plug the Type-C end of the charging cable into the keyboard and the other USB end into your preferred USB charger. (USB charger is not included.)
- When charging, the power indicator will turn red. Generally, it takes Approximately2 hours for a full charge. (Output: DC 5 V/500 mA.)
Sleep Mode
The keyboard will enter sleep mode after remaining idle for 30 minutes.
To activate it, press any key and wait for 3 seconds.
Trouble Shooting
If your device doesn’t respond to the keyboard, try the follow steps.
- Restart your device.
- Turn your keyboard off and back on.
- Forget and re-pair your keyboard.
- If your keyboard doesn’t establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard. After charging, if your keyboard doesn’t operate correctly, please contact our Customer Service.
FCC Regulatory Compliance
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>