Joy-it RB-CaseP5-07 Caixa Calha DIN Para Raspberry Instruction Manual
- July 11, 2024
- JOY-It
Table of Contents
Joy-it RB-CaseP5-07 Caixa Calha DIN Para Raspberry
Product Specifications
- Product Name: Caixa para Calha DIN para Raspberry Pi 5
- Model Numbers: RB-CaseP5-07 & RB-CaseP5-07B
- Manufacturer: Joy-IT powered by SIMAC Electronics GmbH
- Address: Pascalstr. 8, D-47506 Neukirchen-Vluyn
- Website: www.joy-it.net
Product Usage Instructions
Removing the Bottom Part of the Case
To begin using the Caixa para Calha DIN para Raspberry Pi 5, follow these steps:
- Locate the bottom part of the case.
- Remove the bottom part of the case carefully to access the interior.
General Information
Dear Customer,
Thank you for choosing our product. Below, we show you what to consider during installation, operation, and use. If you encounter any unexpected problems during use, please do not hesitate to contact us.
Assembly
First, open the case by pressing the retention ring at the bottom and pulling the black retention clip out.
Now remove the lower part of the case.
Next, place your Raspberry Pi 5 on top and secure it with the included screws.
Now, place the included heat sinks on your Raspberry Pi 5. To do this, remove the adhesive film from the thermal pads and place the heat sinks in the following positions:
If you want to use the active cooler, you can now press the acrylic panel out of the case and insert the panel with the integrated cooler. Now, connect the fan cable to the fan connector on your Raspberry Pi 5.
Now, reinsert the lower part of the case into the case. Do not forget to secure the case again with the black retention clip. Your case is now fully assembled and ready to use.
Other Information
Our information and return obligations under the German law on electrical and electronic equipment (ElektroG)
Symbol on Electrical and Electronic Equipment:
This crossed-out trash can symbol means that electrical and electronic equipment should not be disposed of with household waste. You should deliver old devices to a collection point. Before delivering them, you should separate used batteries and accumulators that are not included in the old device.
Return Options:
As an end user, you can return your old device (which performs essentially the same function as the new device purchased from us) free of charge when purchasing a new device. Small appliances with external dimensions of no more than 25 cm can be returned in normal household quantities, regardless of purchasing a new device.
Return Option at Our Company Location During Business Hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
Return Option in Your Area:
We will send you a shipping label with which you can return your device free of charge. To do so, contact us by email at Service@joy-it.net or by phone.
Information About Packaging:
Pack your used device securely for transport. If you do not have suitable packaging material or do not want to use your own material, contact us, and we will send you suitable packaging.
Support
We are also at your disposal after your purchase. If you still have questions or if problems arise, we are also available by email, phone, and the support system.
- Email: service@joy-it.net
- Ticket system: http://support.joy-it.net
- Phone: +49 (0)2845 9360 – 50 (Mon. – Thu.: 09:00 – 17:00, Fri.: 09:00 – 14:30)
- For more information, visit our website: www.joy-it.net
- Published on: 2024.04.05
Frequently Asked Questions
Q: How do I install the Raspberry Pi 5 into the case?
A: To install the Raspberry Pi 5, follow these steps:
- Open the case by removing the bottom part.
- Place the Raspberry Pi 5 securely inside the case.
- Close the case by attaching the bottom part back on.
Q: What is the recommended maintenance for this product?
A: It is recommended to periodically clean the case with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
Q: Is this case compatible with other Raspberry Pi models?
A: This specific case is designed for Raspberry Pi 5. While it may fit other models, it is best to check the dimensions and compatibility before use.