JOY-it Armor Case Block Active Instruction Manual

June 1, 2024
JOY-It

JOY-it Armor Case Block Active

JOY-it Armor Case Block Active

GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact us.

ASSEMBLY

  1. Stick the heat-conducting pad on the Raspberry Pi 4 like shown in the following picture. It is important that you remove the transparent film from the pads beforehand.
    Assembly

  2. Now, screw tight the cooling fans with the screws with the narrow head with the help of the alien key included in the scope of delivery.
    Assembly

  3. Put the top of the case onto the Raspberry Pi 4.
    Assembly

  4. Now, turn the Raspberry Pi 4 with the top around, put the bottom part onto it and screw the case tight at the bottom with the screws with the thicker head.
    Assembly

  5. Connect the cooling fans with the Raspberry Pi 4. Please note, that the red cable must be connected with pin 4 {SV) and the black cable with pin 6 {GND).
    Assembly

  6. The case is now completely mounted.
    Assembly

OTHER INFORMATION

Our Information and Take-back Obligations according to the German Electronic Law (ElektroG).

Symbol on Electrical and Electronic Products

This crossed-out bin means that electrical and electronic products do not belong into the household waste. You must hand over your old appliance to a registration place. Before you can hand over the old appliance, you must remove used batteries and replacement batteries which are not enclosed by the device.

Return Options

As the end user, you can hand over your old appliance (which has essentially the same functions as the new one bought with us) free of charge for disposal with the purchase of a new device.
Small devices, which do not have outer dimensions bigger than 25 cm can be handed in for disposal independently of the purchase of a new product in normal household quantities.

  1. Possibility of return at our company location during our opening hours
    SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

  2. Possibility of return nearby
    We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at service @joy-it.net or via telephone.

CUSTOMER SUPPORT

If any questions remained open or problems may arise after your purchase,we are available by e-mail, telephone and ticket support system to answer these.
E-Mail: service@joy-it.net
Ticket-system: http://support.joy-it.net
Telephone: +49 (0)2845 9360 – 50(Mon. – Thur.: 10:00 – 17:00 o’clock

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals