joy-it RPI PICO Microcontroller Controller Instruction Manual
- June 1, 2024
- JOY-It
Table of Contents
joy-it RPI PICO Microcontroller Controller
Product Information
Specifications
- Compatible with Raspberry Pi, Arduino Nano, ESP32, RPI PICO, Micro:bit
- Various GPIO pins for sensor and component connections
- Support for a wide range of sensors and modules such as relays, motors, displays, gyroscopes, RFID, and more
- Includes switches for sensor selection and control
Product Usage Instructions
General Information
Thank you for choosing our product. Below are some guidelines for
commissioning and use:
- If you encounter any unexpected problems, feel free to contact us for support.
Basics
The product is compatible with various platforms like Raspberry Pi, Arduino
Nano, ESP32, RPI PICO, and Micro:bit. It utilizes different GPIO pins for
connecting sensors and components.
Sensors
The product supports a wide range of sensors and modules including but not
limited to:
- 1.8 TFT Display
- Light barrier
- Relay
- Ultrasonic sensor
- Stepper motor
- Gyroscope
- Rotary encoder
- PIR Sensor
- Buzzer
- Servo motor
- DHT11 sensor
- Sound sensor
- RGB Matrix
- And more…
Installation of Raspberry Pi
- Place your Raspberry Pi 4 on the GPIO header and screw it in place.
Using the Adapter Boards
Instructions on how to use the adapter boards can be found in the provided
documentation.
Learning Center
Visit our website at https://joy-pi.net/downloads for learning resources
and additional information.
Other Functions
The product includes features such as variable voltage support, voltmeter,
analog-digital converter, and voltage translator.
Additional Information
For further details and inquiries, visit our website at www.joy-
it.net.
Support
Contact us for any product-related support or inquiries at our website.
Frequently Asked Questions (FAQ)
Q: What sensors are compatible with the product?
A: The product supports a wide range of sensors including ultrasonic
sensors, gyroscopes, PIR sensors, sound sensors, and more. Please refer to the
user manual for a comprehensive list.
Q: How can I connect my Arduino Nano to the product?
A: To connect your Arduino Nano, refer to the pinout information provided
in the user manual and make the necessary connections to the GPIO pins on the
product.
References
- ITnet | Servizi di Colocation e Cloud
- Joy-IT Helpdesk
- For Makers and Professionals | Joy-IT
- joy-pi.net/Joy-Pi-install.sh
- For Makers and Professionals | Joy-IT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>