joy-it SBC-Buck02 DC-DC Step Down Voltage Converter User Guide
- May 15, 2024
- JOY-It
Table of Contents
joy-it SBC-Buck02 DC-DC Step Down Voltage Converter
Specifications
- Input voltage: 9 – 35 V
- Output voltage: 5 V
- Output current: Max. 5 A
- Output power: Max. 25 W
Product Usage Instructions
Wiring Instructions
This voltage converter can output a voltage of 5 V DC with up to 5 A at a voltage supply of 9 to 35 V DC. The wiring should be carried out as follows:
| Voltage input | Common Ground | Voltage output |
|---|
ATTENTION: The board may get hot under load. It is recommended to provide additional cooling for the board when operating at high loads.
FAQ
- Can I use this voltage converter for both residential and commercial purposes?
- Yes, this voltage converter can be used for both residential and commercial applications.
- What should I do if the board overheats during operation?
- If the board overheats during operation, it is recommended to provide additional cooling to prevent damage to the converter.
- How can I dispose of the old appliance properly?
- To dispose of the old appliance properly, please return it to a collection point designated for electrical and electronic waste.
- How can I contact customer support for further assistance?
- You can contact customer support via email at Service@joy-it.net, by phone at +49 (0)2845 9360-50, or through the ticket support system at http://support.joy-it.net.
GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product. In the following, we will
introduce you to what to observe while starting up and using this product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
Specifications
USAGE
This voltage converter can output a voltage of 5 V DC with up to 5 A at a voltage supply of 9 to 35 V DC. The wiring is carried out as illustrated be- low:
ATTENTION: The board gets hot under load! We recommend additional cooling of the board for high loads.
OTHER INFORMATION
Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)
Symbol on electrical and electronic equipment:
This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste. You must return the old appliance to a collection point. Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.
-
Return options:
As an end user, you can return your old device (which essentially fulfils the same function as the new device purchased from us) free of charge for disposal when you purchase a new device. Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities independently of the purchase of a new appliance. -
Possibility of return at our company location during opening hours: SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germa-ny
Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy-it.net or by telephone. -
Information on packaging:
If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
SUPPORT
- If there are still any issues pending or problems arising after your purchase, we will support you by e-mail, telephone and with our ticket support system.
- Email: service@joy-it.net
- Ticket system: http://support.joy-it.net
- Telephone: +49 (0)2845 9360-50 (Mon – Thur: 10:00 – 17:00 o‘clock,
- Fri: 10:00 – 14:30 o‘clock)
- For further information please visit our website:
- www.joy-it.net
- Published: 15.09.2023