JOY-iT SBC-PIR Infrared Motion Sensor User Manual

: October 27, 2023
: JOY-It

Table of Contents

GENERAL INFORMATION
USE WITH ARDUINO
- CODE EXAMPLE ARDUINO
USE WITH RASPBERRY PI
- CODE EXAMPLE RASPBERRY PI
- CODE EXAMPLE RASPBERRY PI
ADDITIONAL INFORMATION
SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JOY-iT SBC-PIR Infrared Motion Sensor

GENERAL INFORMATION

Dear customer,
thank you very much for choosing our product. In following, we will introduce you to what to observe while starting up and using this product.
Should you encounter any unexpected problems during use, please do not hesitate to contact us.

USE WITH ARDUINO

CODE EXAMPLE ARDUINO

After connecting the SBC-PIR, as shown above, we will now connect the Arduino to our PC using the included cable. Then we will open our Arduino IDE. If you don’t have it yet you can download it here and install it. After that we select our Arduino under Tools > Port. Under Tools > Board we select “Arduino Uno” and under Tools Programmer we select “ArduinoISP”.

After the above steps we will now simply copy the following code into our IDE.

USE WITH RASPBERRY PI

CODE EXAMPLE RASPBERRY PI

After connecting the SBC-PIR, as shown above, we will now connect the Raspberry Pi to a screen as well as we connect a mouse and keyboard. After the setup we will open the console.

After the above steps you should see this window in front of you.

CODE EXAMPLE RASPBERRY PI

After the above steps we will now create a new file by

sudo nano SBC-PIR.py

and copy the following code into the new file opened by going to **Edit

Paste**

After all this we save and exit the file with CTRL+O ENTER CTRL+X and copy the following code into the new file opened by going to Edit>Paste
You then execute the code by entering

sudo python3 SBC-PIR.py

You stop the code by using CTRL+C

ADDITIONAL INFORMATION

Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)

Symbol on electrical and electronic equipment:

This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste. You must return the old appliances to a collection point.
Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.
Return options:
As an end user, you can return your old device (which essentially fulfils the same function as the new device purchased from us) free of charge for disposal when you purchase a new device.
Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities independently of the purchase of a new appliance.
Possibility of return at our company location during opening hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germany
Possibility of return in your area:
We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy-it.net or by telephone.
Information on packaging:
If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.

SUPPORT

If there are still any issues pending or problems arising after your purchase, we will support you by e-mail, telephone and with our ticket support system.
Email: service@joy-it.net
Ticket system: http://support.joy-it.net
Telephone: +49 (0)2845 98469-66 (10-17 o‘clock)
For further information please visit our website: www.joy-it.net