SLX MICROSIM MICROSIM 2.0 Dual Motion Sensor for Club User Manual
- July 9, 2024
- SLX MICROSIM
Table of Contents
SLX MICROSIM MICROSIM 2.0 Dual Motion Sensor for Club
Product Usage Instructions
Registering Your Product
To register your product and receive an E6 Connect license:
- Scan the QR code with a camera app or visit https://register.swinglogic.us
- Fill out the registration information and receive the E6 license key via email
- Create an E6 account at https://portal.e6golf.com/ using the same email address
- Redeem the license key and download E6 Connect for setup
Swing with MICROSIM Sensor
For accurate swing results using the MICROSIM sensor:
- Install the Club Mount on the club and raise the sensor for recognition
- When in the swing position, the sensor will vibrate
- Swing within 3 seconds for accurate readings
- Control clubs through the connected app and buttons
Charging and Using Power Bank
To charge your phone during a round of golf:
- Use a 5V d.c., 1A charging adapter with USB-C type for charging
- Hybrid charging time is 8 hours, MICROSIM charging time is 2 hours
Button and LED Guide
Utilize the buttons and LEDs for control and feedback:
- MICROSIM Button for remote control functions
- LED indicators for Bluetooth connection, swing readiness, club change, and swing results
Firmware Update
To update firmware:
- Connect to SLX-CONNECT and select Device in the menu
- The green button indicates a successful firmware update
Device Factory Reset
If facing connectivity issues, perform a factory reset:
- Press and hold both the + and – buttons simultaneously for more than 7 seconds
FAQ
- Q: What should I do if the swing recognition is challenging?
- A : Adjust the position of the MICROSIM sensor to find the recognized position based on your setup posture.
- Q : Can I charge the device with any charging adapter?
- A : Use a 5V d.c., 1A charging adapter with USB-C type for device charging to ensure optimal performance.
Composition
SLX-MICROSIM 2.0 (Multi Motion Sensor) 2.0 model components. It may be changed depending on some package keys.
Register Product
Welcome to SLX. Register your product right away. After registration, you will receive an E6 Connect license.
Scan QR with the Camera App
You must register your product and serial number on SwingLogic.us and select
the license type to receive your E6 License key
Or navigate to https://register.swinglogic.us
Registration STEPS
Use the Camera app to scan the included QR code Fill out registration
information. E6 license key will be emailed from
registration@swinglogic.us and is
accessible from the SwingLogic user portal Set up E6 account at
https://portal.e6golf.com/ using the same email address in step 2 Redeem the
license key Download E6 Connect and setup using the same The email address as
The above The Caution ) If The you do not register the product, you will not
be able to receive a license, and some AS and exchange may be difficult.
Swing with MICROSIM sensor
If you use a MICROSIM sensor, you can get more accurate swing results. Club Mounts are required when swinging using the MICROSIM sensor.
- Install the mount on the club as shown below. by turning the sensor When you insert it, the club is automatically recognized.
- Install the mount on the club and raise the sensor (the club will be recognized)
- When you get into swing position, it will vibrate.
- Swing within 3 seconds
- You can control clubs, etc. through the connected app and buttons.
Note) Swing recognition may be difficult depending on the golfer’s setup posture. In this case, adjust the position of your MICROSIM sensor to find the recognized position.
Charging and using Power bank
Charge your phone during a round of golf with power bank function
Device Charging
Caution) It can be charged with USB-C type using a 5 V d.c., 1 A charging adapter. Hybrid charging time 8 hours, MICROSIM charging time 2 hours
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems.)
- The marking on the battery, manual, or packaging indicates that the battery\ in this product should not be disposed of with other household waste.
- Where marked, the chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
- The battery incorporated in this product is not user-replaceable. For information on its replacement, please contact your service provider. Do not attempt to remove the battery or dispose of it in a fire. Do not disassemble. crush, or puncture the battery. If you intend to discard the product, the
- waste collection site will take the appropriate measures for the recycling and treatment of the product. including the battery.
Button and LED Guide
Enjoy the ultra-easy-to-operate buttons and the MICROSIM button with a remote control function.
MICRO SIM LED
Firmware Update
Connect SLX-CONNECT > Connect menu > Device Select
When the firmware of HW is updated, it is activated with a green button.
Device Factory Reset
If device is not connected continuously, any button does not work, or is incorrect, you can perform a factory reset through the button.
- Press two fingers at the same time the + / – button continuously for more than 7 seconds.
Caution) All stored calibration data will be deleted during the factory reset.
Using E6 Connect
E6 CONNECT software is available. Please install and connect according to each SETP.
Create an account and register with Swing Logic
Create an account and register with us STEP 1 Find the included Card as depicted below: You can either scan the QR code on your phone’s camera or go to : https://register.swinglogic.us
LICENSE OPTIONS EXPLAINED (IMPORTANT)
5-Course Option is your FREE License and one version ( iOS or PC) is included
with Purchase. If you want to UPGRADE to the Expanded Content Subscription @
$10/mo, that is the Option DETAILS: Expanded Content Subscription now has ~40
Courses, mini-games ( darts, closest to pin, a battleship…) & Online Play +
multiple modes ( Regular Stroke Play, captains choice, best ball etc…) Check
out our website to learn more about the additional features if this interests
you. If you are an avid golfer…$10/mo for infinite rounds on 40 courses is a
pretty good deal
Using E6 Connect
Install E6 CONNEC
STEP 2
- After downloading, Run the program to install the software.
- PC Version: https://portal.e6golf.com/update/e6-connect
- iOS Version: You will need to download the software from the app store. If you search for “E6 CONNECT” then it will pull up and you will be able to download
STEP 3
Start the E6 Application & Redeem your License
If you have a License code, press the REDEEM button to enter the code. If you don’t have the code, press SKIP to move on. If you press SKIP, the demo version will be applied by default. You will also be required to setup an E6 Connect Account during this process. Please take note and remember your login credentials
STEP 4
License Activation
Enter the License Key and press the Enter button
STEP 5
Select Tracking System Device
Select “SwingLogic -SLX ”
NOTE : Depending on the license type you are redeeming, the list of available trackers will be different. If you have redeemed any of the licenses we have provided, the list will be much shorter and contain only small sensor- based products
STEP 8
Calibrate sensor Setting – Maximize Accuracy
When inside the application’s Main Menu. Settings→Simulator→Configure
Important!
Default Settings should be: Difficulty = Normal, Sensitivity = Normal,
Woods/Iron/Putter = Your Choice based on the type of clubs you will be
installing sensors on. It is best to start with 0% distance “boost” to see
what your sensor is displaying initially then adjusting up or down based on
simulator output vs expected ball flight. You can also increase the altitude
in environmental settings to have your ball fly further
STEP 9
Check the swing data on the screen
When you swing, the ball will fly on the screen and the Post-Shot dialog is displayed.
Important!
For more details on E6 Connect, check the
“https://e6golf.com/e6-connect/manual”
STEP 10
Club selection control
You can change your club selection outside of the E6 Connect Application by click these up and down buttons
Important!
On the green, it automatically changes to the target direction. (Club side
does not work on green)
STEP 11
Target Control
In the fairway/driving range, if you click the mode button once, it will change to “Target Control mode”. Afterwards, you can change the target with the up/dwon buttons. If you click the mode button again, it will change to “Club Control mode”.
Troubleshooting
Check the latest registered information at swinglogic.us/support. Below is a simple troubleshooting guide.
Replacing and reconnecting the MICROSIM Sensor
- If the Hybrid and MICROSIM are not connected or if you need to replace the MICROSIM,
- See the “MICROSIM Sensor Replacement” manual.
- If you press and hold the “-” button on the Hybrid and MICROSIM sensors, they are automatically connected.
M. ICROSIM Sensor Swing Recognition
- If the MICROSIM sensor does not recognize the swing well,
- try adjusting the position of the sensor installed on the glove.
- Depending on the customer’s setup posture, it may not be recognized. .
Calibration of swing results
- If the swing results are very different
- try adjusting each result in the SLX-Connect app > Settings > Calibration menu.
Factory reset
- If everything does not work,
- you can reset it by pressing the “+” / “-” buttons at the same time for 7 seconds. Read the “Factory Reset” menu.
FCC Statement
FCC Compliance Statement
FCC / IC RULES
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
Sample wording: This equipment complies with FCC RF exposure requirements set
for th in an uncontrolled environment and can be used without any restriction.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1)this device may not
cause interference, and (2)this device must accept any interference, including
interference that may cause undesired operation of the device.
SPECIFICATION
- Product name : Dual motion sensor for the club (MICROSIM 2.0) Model No: SLX-MM200
- **Size: 42mm *** 15 mm (22g)
- Bluetooth: 4.0 BLE 2.4Ghz 3 PRO1Mbps
- Power Source: Li-Polymer 80mAh
- Operating Temperature: -10 °C ~ 50 °C
- Storage temperature: 5 °C ~ 40 °C
CONTACT
- Manufacturer: ULIKE (MADE IN KOREA)
- Address: 23, Daehak 1-ro 58beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do, Republic of Korea