CENTEK CT-2580 Wireless Vacuum Cleaner Instruction Manual

CENTEK CT-2580 Wireless Vacuum Cleaner Instruction Manual

Dear Customer,
Thank You for purchasing a CENTEK brand product. We guarantee flawless function of this item, provided the guidelines of its operation are observed.

PURPOSE OF THE DEVICE
This device is designed for automatic cleaning of dust and dirt from various surfaces (tiled, parquet floors, carpets, etc.). Use the appliance for domestic purposes only in accordance with this manual. The device is not intended for commercial use.
Use for any other purpose is considered improper. The manufacturer is not responsible for any damage caused by improper use of the device.

SAFETY PRECAUTIONS

ATTENTION
Use the appliance in strict accordance with this manual to avoid damage to the appliance and furniture, and to avoid personal injury

• It is forbidden to operate the device at temperatures below 0 and above 40 °C on wet and sticky surfaces.
• Make sure there are no wires on the floor, including the cord from the vacuum cleaner’s charging station, which could tangle the vacuum cleaner.
• Remove fragile items (vases, plastic bags) from the floor that could damage the appliance.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of life experience or knowledge, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children must be supervised to prevent playing with the appliance.
• Do not place any objects on the vacuum cleaner when it is turned on.
• Do not allow clothes or body parts (hair, nails, etc.) to get caught in the brush or drive wheel of the appliance to avoid injury.
• Do not use the device to clean smoldering objects (cigarette butts, matches, etc.).
• The appliance is not intended for cleaning long pile carpets (such carpets require special cleaning methods).
• Do not allow the device to come into contact with hard and sharp objects (glass, nails, etc.).
• Do not carry the vacuum cleaner by holding it by the protective cover or shock buffer.
• Regular cleaning and maintenance of the vacuum cleaner and the docking station should only be carried out in the switched off or unplugged state.
• Do not wipe any part of the instrument with a wet cloth or use liquids to clean it.
• Use this instrument only with the supplied power supply.
• Unplug the power supply from the outlet before cleaning or servicing the instrument.
• The instrument has a built-in battery that can only be replaced by a qualified technician.
• Batteries must be removed from the instrument before disposal.
• Disconnect the device from the power supply before removing the battery.
• Dispose of batteries safely.
• To charge the batteries, only the power supply supplied with the device should be used.
• Batteries, docking stations and chargers supplied by third parties must not be used.
• Do not disassemble the battery and docking station.
• Do not place the docking station near heat sources (electric stoves, etc.).
• Do not wipe the docking station with a wet cloth or touch it with wet hands.
• Do not dispose of used batteries with household waste. Contact a specialized organization.
• If the power cord is damaged, stop using the appliance immediately and contact the service center to replace the cord.
• Transport the robotic vacuum cleaner in the switched off state and in its original packaging
• Before a long period of non-use, fully charge the battery and place the instrument in a cool, dry place. Charge the battery at least once every 2 months to prevent damage to the battery due to excessive discharge.

REMOVING THE BATTERY

• Make sure that the robot vacuum cleaner does not touch the docking station, let the device run until the battery is completely discharged and turns off.
• Remove the battery cover screws.
• Remove the battery cover, disconnect the connector and remove the battery.

BATTERY HANDLING

• The device has a built-in lithium battery. It is forbidden to disassemble the battery, expose it to increased loads and open flames.
• The battery is operated in a low air pressure environment which, if mistreated, may result in an explosion or leakage of flammable liquids and gases.
• Do not expose the battery to high temperatures or direct sunlight as this may cause the battery to explode.
• Do not use the device if the battery is visibly swollen.
• Dispose of the battery in accordance with local regulations. Do not dispose of the battery with normal household waste.
• Do not attempt to replace, disassemble or modify the battery yourself.
• Avoid increased mechanical stress and damage to the battery housing with hard objects. Damage to the battery may result in leakage, overheating, or fire.

Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

**APPLIANCE DESCRIPTION

**

SCOPE OF SUPPLY

Wireless vacuum cleaner – 1 pc.
Docking station – 1 pc.
Device for cleaning the device – 1 pc.
HEPA filter – 1 pc.
Dirty water tank – 1 pc.
Clean water tank – 1 pc.
Handle – 1 pc.

OPERATION

**HANDLE DISASSEMBLY AND ASSEMBLY

**

1. Insert the end of the handle vertically into the hole of main appliance and ensure the handle is firmly. Then installation is completed.
2. Please press the shrapnel in the hole on back by using a tool. Pull out handle while hearing a “click”.

**CLEAN WATER TANK DISASSEMBLY AND ASSEMBLY

**

1. Gently press the release button to pull out water tank.
2. Install the rear of clean water tank back to main body and with a gentle push. Installation is completed by hearing a “click”.

**CLEAN WATER INJECTION

**

Take out the clean water tank and open its top cover then inject in clean water. water temp need blow 60°C. If deep cleaning is required,pour a bottle of qualified cleaning liquid. Tighten the cover and ensure no leaking. Install back water tank to the main body.

**DIRTY WATER TANK DISASSEMBLY AND ASSEMBLY

**

1. Gently press the release button of dirty water tank to pull out water tank.
2. Install the rear of dirty water tank back to main body and with a gentle push. Installation is completed by hearing a “click”.

**BRUSH ROLLER COVER DISASSEMBLY AND ASSEMBLY

**

Press the 2 pieces of release button at the same time and pull upwards the cover. Then the cover can be removed away.

**BRUSH ROLLER DISASSEMBLY AND ASSEMBLY

**

1. Pull upwards the roller handle in its left side.Then the brush roller can be removed away.
2. Hold the roller’s left handle with fingers,align the right side or roller to the right card slot then put the roller’s left handle into the same side slot.Then the installation completed.

OPERATION

1. This machine works automatically with «Floor Washing» mode after pressing power button to turn on. Brush roller sprays water at the same time. Press the power button again to stop working.
2. Press shift button while «Floor Washing”mode working ,machine turns to work in a lower power and changes to‘Dry Vacuum» mode. At this mode, the suction decreased and the brush roller stop spraying water.
3. Press shift button while «Dry Vacuum”mode working, the machine turns to work in «Sterilizing» mode. The solution start preparing and the machine announces «Solution are going to ready» «Solution 50% ready» «Solution 100% ready”. After 3 times of announcement, the machine start vacuuming and roller start spraying water.
4. Put machine on charging bracket after using and press self-cleaning button to start inner clean automatically.

CHARGING

1. Posit machine into its bracket and plug its adaptor in house socket can start charging.
2. Keep machine straight and posit in a corner to avoid stumble or any damages.
   WARN: If nonuse in a long time,please charge machine 3 hours at every 3 months.

VOICE PATTEN BUTTON
Press the Voice button in back body to turn on or turn off voice guide function

**VIEWING SCREEN

**

SELF-CLEANING FUNCTION
Return the device to the dock and press the «SELF-CLEANING» button (12). Within 90 seconds, the vacuum cleaner will perform basic maintenance and issue a voice command to shut down.
Note: Make sure that the dirty water tank is not overfilled, and the clean water tank contains at least 200 ml of liquid

MAINTENANCE AND CARE OF THE DEVICE

1. After working,pull out water tank and open its filling cover to empty surplus water
2. When dirty water tank is full of dirty water, machine will automatically shutdown, the prompt will be warning via viewing screen and the voice guide.
3. Remove dirty water tank,drag out its cover and empty the tank.
4. Flush the dirty tank and filter net with clean water.If stubborn dirt inside of tank,please clean it with the accessory of cleaning tool.
5. Take off brush roller cover,clean away tangled hair or debris on the brush head and rinse with clean water. Then install back the brush roller into floor brush.

CARE OF THE HEPA FILTER

The filter must be cleaned after each use of the vacuum cleaner. Shake the filter to clear it of dust. In addition, approximately once a month, with an average intensity of use, it must be purged with a powerful jet of air. It is forbidden to wet the HEPA filter – this can lead to the failure of the electric motor! If the vacuum cleaner is used at an average intensity, replace the HEPA filter every 6 months.

POSSIBLE FAULTS

connected with power bracket before turn on self-cleaning button.
Dirty water tank leaking water from 2 flanks| Please use the company qualified solution only and 2 bottle cap at a time.
Machine not work| Please full charge before use
Low suction| Clean barriers in nozzle or tube.
Clean HEPA filter net

SPECIFICAIONS

Dock-station
Nom. input voltage| 220-240 В ~50/60 Гц
Charging time| 4.5 H

DISPOSAL

The chemicals contained in the battery pollute the environment. Before disposing of the device, remove the battery and take it to a specialized collection point. The battery may only be removed at the end of its service life. Never allow the battery to come into contact with metal objects

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://[centek.ru/servis](http://centek.ru/servis). Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina- Servis», Krasnodar, Phone: +7 (861) 991-05-42.

The product has the Certificate of Conformity.
№ ЕАЭС RU С-CN.ВЕ02.В.05018/23 of 10.08.2023.
MANUFACTURER AND IMPORTER INFORMATION
Imported to EAEU by : Individualniy Predprinimatel Asrumyan Karo
Shurikovich. Address : Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt.
Pashkovskiy. Phone : +7 (861) 2-600-900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions are observed:

2. The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
   The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

3. The guarantee shall be valid if the following operation conditions are observed:

   • the appliance is used in strict accordance with the present manual;
   • the safety rules and requirements are observed.

4. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

5. The guarantee does not apply in the following cases:

   • mechanical damage;

   • normal wear of the appliance;

   • non-observance of operation requirements or erroneous actions on the part of the user;

   • improper installation or transportation;

   • natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;

   • ingress of foreign objects, liquids or insects into the inside of the appliance;

   • repairs or modifications to the appliance by unauthorized persons;

   • use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;

   • failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
     a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
     b) consumables and accessories (packaging, covers, slings, carry bags, mesh  screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);

   • for battery-powered appliances – operation with inappropriate or depleted batteries;

   • for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging

6. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

7. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

8. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

Documents / Resources

| CENTEK CT-2580 Wireless Vacuum Cleaner [pdf] Instruction Manual
CT-2580, CT-2580 Wireless Vacuum Cleaner, CT-2580 Vacuum Cleaner, Wireless Vacuum Cleaner, Vacuum Cleaner, Vacuum, Cleaner
---|---

References

• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>