Symatoys Q12 Remote Control Boat User Manual

June 13, 2024
Symatoys

Symatoys Q12 Remote Control Boat

Symatoys Q12 Remote Control Boat

Main features

  1. The boat will automatically be powered on when launched in water, and can be connected directly to the remote control.
  2. The effective remote distance is up to 50 meters, otherwise the boat will be out of control.
  3. The boat can be driven for about 20 minutes.
  4. The boat does not have an automatic capsize function, so be careful not to capsize the boat or hit an obstacle when controlling it.
  5. When the boat is operating, make sure there are no weeds and other debris to avoid tying up the propeller.
  6. The navigation rudder needs to be adjusted manually.
  7. Low-voltage alarm warning: When the battery runs low, the remote control lights will flash and sound a “Di di di” alarm. (When the alarm sounds, please sail the boat back immediately to prevent the boat from running out of power on the way back)
  8. As the boat is equipped with an automatic on/off switch, you must lift the boat out of the water and remove the battery each time after use; and clean it with a dry soft cloth. (Notice: Do not place the boat in the water with electricity after use)

Important safety information

Welcome to purchase Syma’s RC products. In order to make it easier and more convenient for you to use this RC boat, please read this manual in detail before your operation, and please keep this manual as a reference for future operation and maintenance instructions.

Safety Precautions

  1. This product must be used under adult supervision and guidance. Not for children under 8 years. This is not a toy.
  2. Please keep all small parts of the remote control boat out of the reach of children to avoid accidents.
  3. Do not charge the battery immediately after use. Please wait until the battery cools down.
  4. When sailing, make sure that there is no one in the water to avoid injury, and that there is no grass or debris on the water surface to avoid the propeller being entangled in the water or the model being damaged.
  5. Never place any small part of the boat in your mouth as it could cause suffocation.
  6. Please keep a safe distance from the high-speed rotating propeller to avoid the risk of strangulation or cuts.
  7. Do not touch the motor as it is a heat-generating part to avoid the risk of burns.
  8. Do not touch the battery as it is a hot part to avoid the risk of burns.
  9. In order to ensure the electromagnetic environment of aviation radio stations, it is prohibited to use all kinds of model remote controls within an area with a radius of 5,000 meters, the airport runway as the center and the point as the center of the circle. Model remote controls shall not be used in the period and area where the relevant state departments issue radio control orders as required.
  10. The packaging or the manual contains important information, which shall be stored properly.

Maintenance and repair

  1. If the RC boat stops running, you must remove the battery.
  2. Avoid exposing the surface of the model to long exposes of sunsight, to prevent paint stripping. Please clean the model with a dry soft cloth each time after use.
  3. If the model is not in use for a long time, please remove the battery to avoid possible damage to the boat from battery Leakage.
    Maintenance and repair

After each use of the model, a dry soft cloth should be used to absorb the moisture in the hatch to ensure that the hull is dry and clean.

About this product

Specifications

Remote control boat

R/C boat weight| About 450g
motor| 280
Battery charge time

| About 180 minutes

Play time| About 20 minutes
remote controller
Operating frequency| 2.4 GHz
Remote Control Distance| 50m
batteries| Two 1.5V*AA (to be purchased separately)
Packing list
Remote control boat| 1
Remote controller| 1
USB charging cable| 1
Wrench| 1
Lubricant| 1
Support holder| 1
Forward and reverse propeller| 1
Forward dental screw| 1
Reverse dental screw| 1
Instruction| 1

Remote control boat components

Remote control boat components

Functions of remote control components

Functions of remote control components

Battery installation: open the battery compartment on the back of the remote control. Install 2 “AA” alkaline batteries (sold separately) into the battery compartment. Make sure the “+”and “-”ends of the batteries match the illustrations inside the battery compartment.

Battery charge of the remote control boat

Battery charge of the remote control boat

The battery will take about 180 minutes to fully charge. The light on the charger plug will show red while charging and will go off when finished charging

BATTERY WARNING

  1. Failure to follow all the instructions may result in serious injury, irreparable damage to the battery, and may cause a fire , smoke or explosion.

  2. Always check the battery’s condition before charging or using it.

  3. Replace the battery if it has been dropped, or in case of odor, overheating , discoloration, deformation or leakage.

  4. Use only the supplied charging cable.

  5. The battery temperature must never exceed 60℃(140°F) otherwise the battery could be damaged or ignite.

  6. Never charge on a flammable surface , near flammable products or inside a vehicle ( preferably place the battery in a non flammable and nonconductive container ).

  7. Never leave the battery unattended during the charging process . Never disassemble or modify the housing’s wiring , or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery . Avoid short circuit between the charge leads.

  8. Never expose the battery to moisture or direct sunlight, or store it in a place where temperatures could exceed60℃(drone in the sun , for example)

  9. Always keep it out of reach of children .

  10. Improper battery use may result in a fire, explosion or other hazards.

  11. Non-rechargeable batteries are not to be recharged . Rechargeable batteries are only to be charged under adult supervision .

  12. Different types of batteries or new and used batteries are not to be mixed.

  13. Batteries are to be inserted with the correct polarity.

  14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for any damage to their cord, plug , enclosure and other parts and they must not be used until the damage has been repaired.

  15. The packaging has to be kept since it contains important information.

  16. his toy is only to be connected to equipment bearing either of the following symbols:

  17. The toy is to be operated in water only when fully assembled in accordance with the instructions.

Remote control boat battery installation

  1. Twist the cabin knob to the left and right and open the cover upwards.
    Remote control boat battery installation

  2. Turn the inner cabin knob as directed and open the hatch upwards
    Remote control boat battery installation

  3. Place the battery in the battery holder of the hull
    Remote control boat battery installation

  4. Connect the battery to the power plug
    Remote control boat battery installation
    Plug the battery into the RC boat and then into the battery holder. Be careful not to reverse the battery plug.

  5. Insert the cover diagonally into the hull
    Remote control boat battery installation
      Insert the inner hatch into the cabin at a 45 degree angle and then push forward, button up the inner hatch buckle, lastly insert the outer hatch into the cabin at a 45 degree angle and fasten the buckle.

  6. Twist the cabin knob to the left/right until it snaps tight
    Remote control boat battery installation
    For waterproof reasons, the hatch cover is designed to fit tightly and must be removed or closed with force correctly

Spindle tube oiling
  1. Press down on the spindle rubber part and use a wrench to unscrew the set screw and then unscrew the propeller.
    Spindle tube oiling

  2. Remove the motor by unscrewing the four screws on both sides of the motor.
    Spindle tube oiling

  3. Pull the spindle a short distance towards the bow.
    Spindle tube oiling

  4. Squeeze an appropriate amount of lubricant into the end of the spindle tube and slowly pull it by rotating it back and forth so that the lubricant is evenly coated on the inner wall of the spindle tube.
    Spindle tube oiling

  5. Lock the four screws of the motor base
    Spindle tube oiling

  6. Press down on the spindle rubber part and fit the propeller, then fit the set screw with a wrench.
    Spindle tube oiling

  7. The battery cables should be lined up to the side of the boat so that the inner hatch cover is tight.

  8. All plugs should be plugged in tightly.

  9. Make sure the hatch is tightly covered to prevent leaks

Remote Control Guide

  1. Turn on the power switch of the remote control, the power indicator will flash, then put the boat model into the water. If the power indicator is always on, it means the remote control and the boat model are successful in pairing.
  2. If the remote control and the boat model are not successfully paired, the power light will flash.
Function operation

Function operation Function operation
Function operation Function operation

Navigation rudder: It can correct the navigation direction. When going straight ahead, it can be adjusted manually to the left when it is shifted to the left, and to the left when it is shifted to the right adjust.

Accessories list

Accessories list
Accessories list
Accessories list

Contact Us

Please do not hesitate to contact us if you need more further support.

 warranty@symatoys.com.cn
+1 718-312-0558(US)
+44 (0)7723708421(UK)
+4933545519201(DE)
For online support, please scan this code with Facebook Messenger

Warning :Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions , may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    “This device complies with FCC radiation exposure limits set forth for the general population (uncontrolled exposure ).
    This device must not be collocated or operating in conjunction with any other antenna or transmitter.”

RF frequency band : 2405-2475 MHz
Transmitter power : 10dBm
Product name: [High speed boat] Model number: [ Q12] Brand name : SYMA
Declaration of Conformity Inserts: Hereby ,GuangDong SYMA Model Aircraft Industrial Co., Ltd. declares that the radio equipment type High speed boat is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.symatoys.com/down/declaration-of-conformity.html

Symatoys Q12 Remote Control Boat

WARRANTY

LIMITED 2-YEAR WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 2-YEARS Symatoys.com.cn warrants to the original buyer only that its products will be free from defects in material and workmanship for 2 years from the date upon which the product is shipped, either directly from symatoys.com.cn or from an Authorized Re-seller’s location, to the buyer.
The following condition’s must to be eligible for warranty coverage:

  1. During the warranty period product is used as intended by the manufacturer.
  2. The Product has not been disassembled or modified.
  3. The labels and serial numbers show no signs of tampering or altering.
  4. Buyer has a warranty code obtained by registering their product online prior to making a claim.

EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:

  • Damage caused by normal wear and tear
  • Accident, negligence, abuse, misuse, misapplication or willful damage by buyer (or its agents), or acts of nature
  • Crash or burning caused by non-manufacturing factors
  • Damage caused by authorized modification or disassembly not authorized by the instruction manual
  • Damage. caused by incorrect use or operation
  • Damage caused by mismatch or misuse of battery or charger
  • Failure of the operator to follow the operating instruction or use outside the products operating parameters
  • Damage caused by operating the product in or around electromagnetic interference (i.e., radio transmitting tower, high-voltage wire, substation, etc.)
  • Damage caused by operating the product where there may be interference caused by other wireless devices
  • Operating the product with load capacity in excess of the sale weight listed in the manual
  • Operating the product with aged, damaged or unauthenticated third-party components
  • Operating the product with a defective battery

WARRANTY

PROCEDURE: Any claims for breach of the foregoing limited warranty shall only be valid if buyer makes such claim in writing within 2 year of the date of shipment of the product to which the claim. To make a warranty claim, please email warranty@symatoys.com.cn with your full name. address. phone number, order number. vehicle type. part type and purchase date and product issue.

LIMITED REMEDY:
Symatoys.com.cn ‘s sole liability, and buyer’s sole remedy for any breach of the foregoing warranty shall be at Symatoys.com.cn ‘s option to exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or issue a credit or refund to the purchase price the product.
Any replaced products shall be warranted as set forth herein, provided that the period within which buyer may make further claims shall be limited to the remainder of the original period. for the applicable product or 2 years, whichever is longer (although the warranty period shall be suspended during any period of replacement)
DISCLAIMER:

Haftungsausschluss:

THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES. AND Symatyos.com.cn DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE. Symatoys.com.cn IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. INCLUDING BUT NOT UMITED TO COSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY, LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS COSS OF OPPORTUNITY; LOSS OF GOODWILL, LOSS OF EPUTATION; LOSS OF DAMAGE TO COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY. ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages. so the above limitation or exclusion may not apply to you. In addition, some states do not allow limitations on how long an implied warranty lasts. so the above limitation may not apply to you.
FREE REPLACEMENT PARTS FOR 2 YEARS : Symatoys.com.cn  shall also make available any spare part needed for registered vehicles free of charge for 2 years from the date of purchase, with the exception of batteries, motors. circuit boards and transmitters. Shipping charges may apply Limit one part type request per registered vehicle (e.g., registrants are entitled to one extra set of batteries per registered vehicle}. To request spare parts. please email warranty@symatoys.com with your warranty code, vehicle name/model, current shipping address, purchase date and part type GET YOUR WARRANTY CODE AT symatoys.com.cn/pages/warranty- signup HAVE YOUR ORDER NUMBER AND/OR VEHICLE UPC READ

CUSTOMER SUPPORT

British Representative:
CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
Tel: +447419325266
E-mail:info.cetservice@gmail.com
United States Representative:
Duvin Trade Inc 5800 Wood Sorrel Dr, Littleton ,Co, 80123, United States
Phone: 718-312-0558
E-mail: amz@symatoys.com
Manufacturer:
Guangdong Syma Model Aircraft Industrial Co., Ltd
Address: No. 2 West Xingye Road, intersection of North Xingye Road, Laimei Industrial Park, Chenghai District, Shantou City, Guangdong Province, China, Postal Code: 515800
+1 718-312-0558 (US)
usa@symatoys.com(US)
 http://www.symatoys.com
+44(0)7723708421 (UK)
+49 335-4551-9201(DE)
eu@symatoys.com(EU)
Symbol.png

The company has the right of final interpretation of this user manual

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals