Schrader Electronics ASFPJ4 TPMS Transmitter User Manual
- June 5, 2024
- Schrader Electronics
Table of Contents
Electronics ASFPJ4 TPMS Transmitter
User Manual
ASFPJ4 TPMS Transmitter
The device under test is manufactured by the grantee (Schrader Electronics) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable/appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end user.
Schrader Electronics will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end-user. The compliance paragraphs below must be included in the user’s manual.
FCC ID: MRXASFPJ4
IC: 2546A- ASFPJ4
This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards of Industry Canada. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada’s technical specifications were met.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>