DLS Sweden CRPP-VO2.14 High End Tweeter Upgrade Set User Guide
- June 4, 2024
- DLS Sweden
Table of Contents
DLS Sweden CRPP-VO2.14 High End Tweeter Upgrade Set
Product Usage Instructions
Installation
- Ensure the compatibility of your car model with Harman/Kardon or B&W sound systems.
- Locate the existing tweeters in your car’s OEM system and remove them carefully.
- Connect the tweeter adaptor cables marked TW-A and TW-B to the new tweeters.
- Use the adhesive foams provided to secure the new tweeters in place.
- Connect the terminal crimp connectors to the appropriate wires in your car.
Usage
- The DLS Cruise series tweeters provide natural sound engineered for integration.
- Enjoy improved audio quality and clarity compared to your OEM system.
Maintenance
- Regularly check the connections and ensure the tweeters are securely mounted for optimal performance.
FAQ
- Q: Are these tweeters compatible with all Volvo models?
- A: No, these tweeters are specifically designed for Volvo models from 2014 to the present and are compatible with select models equipped with Harman/Kardon or B&W sound systems.
- Q: Can I install these tweeters myself?
- A: Yes, these tweeters are easy to install and come with a manual that provides step-by-step instructions for installation.
- Q: Where can I find more compatibility information?
- A: For a full compatibility list, visit www.dls.se or contact info@dls.se for further assistance.
CUSTOM FIT UPGRADE
Volvo 2014-Present
The Cruise series brings you the DLS natural sound engineered for integration.
Easy to install and the perfect upgrade from your OEM system.
- Detailed warm character component tweeter
- Light weight natural 1″ soft silk dome with transparent coating
- Internal damping pad and rear ventilated back plate, minimizing resonances
- Copper shorting cap improves distortion and inductance parameters
- High-grade neodymium magnet for higher sensitivity
- Exclusive 12dB high pass, hard wire crossover
- High-End Mundorf Mcap® capacitors
- 4dB L-pad attenuation possibility with high-grade MOX resistors
- Air core copper wire coil
- Easy to install
- PRY tool and accessories included
- Detailed assembly guide included
IMPEDANCE vs FREQUENCY
ELECTRO-ACOUSTIC PARAMETERS
Tweeter
- Re: 3.4 Ohm
- Fs: 1950 Hz
- SPL: 94dB 1W/1M
SPECIFICATIONS
- Tweeter: 1″ / 25mm
- Power RMS: 50 W
- Power MAX: 100W
- Impedance: 4 Ohm
- Sensitivity: 94dB 1W/1M
- Freq.range: 2000-25000Hz
- Crossover: 4800Hz / 12dB
Dimension
**COMPATIBLE CAR MODELS***
- Disclaimer: Only compatible with Harman/Kardon and B&W sound systems.
- Read more on www.dls.se for a full compatibility list.
INCLUDED PRODUCTS
- 2pcs Tweeters with crossovers
INCLUDED IN BOX
- 2pcs Tweeter adaptor cable bar ends (marked with TW-A)
- 2pcs Tweeter adaptor cable (marked with TW-B)
- 4pcs Adhesive foams for wrapping
- 4pcs Terminal crimp connectors
- 1pc PRY Tool
- 1pc Manual
CONTACT
- DLS Sweden, a part of Winn Scandinavia AB
- www.facebook.com/dlsaudioofficial
- www.dls.se | info@dls.se
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>