HOFTRONIC 4409159 Bend Pir Solar Garden Spotlight User Manual

HOFTRONIC 4409159 Bend Pir Solar Garden Spotlight

IMPORTANT SAFETY DETAILS

1. This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
2. Please handle carefully, avoid rough handling and collision.
3. This product may NOT be installed by minors or people with a mental disability.
4. The product should NOT be covered with insulation material at any time. Unless using a model with an insulation guard.
5. Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.
6. It is important to install the light in a location that receive full sunlight each day, away from the shade caused by trees, buildings etc. Shady locations will not allow the battery to be fully charged and will reduce the hours of night time light.
7. The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time.
8. This solar light include a built-in photo sensor, which detects the level of surrounding natural light and controls when the light will automatically switch on and off. The solar light should be placed at least 2 meters apart from one another and away from other night time lights sources as this might keep the solar lights from automatically turning on at dusk.
9. Dispose the used battery properly! Do not dispose the battery in fire!

SPECIFICATIONS

(300lumen), then turn to dim light. Detection range 120 degrees and 8 meters. Maximum time of triggering the sensor every night: 200 times.

PACKAGE INCLUDES

HOW TO USE

TURN ON THE SWITCH

The switch is located at the back side of the solar panel. Turn on the switch, the lamp will start to work automatically (the product has a built-in light sensor so that the lamp automatically switches off and charges during the day and automatically switches on the light at dusk).

INSTALLATION

No protective film cover the panel, install it on the wall or other outside place with screws directly. Please pick a location where the product can have adequate amount of sunlight. Two ways of installation: spike for ground, and base for wall mounted.

1. WALL MOUNTED
   

2. GROUND MOUNTED
   
   

ADJUSTMENT

The lamp is flexible in adjusting the angle of light spot and the solar panel. The lamp lighting projector can be adjusted by 90 degrees, and the solar panel 180 degrees.

BATTERY REPLACEMENT

The performance of the battery may decrease over time (usually about 1-2 years), please replace the battery as shown in the picture.

NOTES

1. It is important to install the light in a location that receives full sunlight each day for at least 4-5 hours, away from the shade caused by trees, buildings etc. Shady locations will reduce the hours of night time light.
2. Please handle carefully, avoid rough handling and collision.
3. Dispose the used battery properly! Do not dispose the battery in fire!

MAINTENANCE, TROUBLESHOOTING

1. Before using the solar light for the first time, leave the light in direct sunlight for about 36-48 hours. The light will achieve optimum light output after the enormous exposure to the sunlight.
2. Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.
3. It’s important to install the light in a location that receives full sunlight each day, away from shade caused by trees, buildings etc. Shady locations will not allow the battery to be fully charged and will reduce the hours of night time light.
4. This solar light include a built-in photo sensor, which detects the level of surrounding natural light and controls when the light will automatically switch on and off. The solar light should be placed at least 2 meters apart from one another and away from other night time light sources as this might keep the solar lights from automatically turning on at dusk.
5. The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS
Product can only be used outdoors.

USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/ neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION

This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.

Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION

The product complies with the following
directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.

Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>