meross MSS620BHK Compatible Outdoor Smart Plug User Manual

June 14, 2024
Meross

meross MSS620BHK Compatible Outdoor Smart Plug

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-product

Warning

  • Do not install the plug with wet hands or when standing on wet surfaces.
  • Do not plug electrical appliances with a current of more than lOA to this plug.
  • Do not soak the plug in water or spray water on it. Otherwise, it will be damaged.
  • The outlets should remain capped with the included waterproof covers while not in use. Otherwise, the plug might be damaged by rain or dew

Installation Guide

  • Download the Meross app.

  • Plug MSS620 into an outlet nearyourWi-Fi router*

Set up the device.

  • For Android users Open the Meross app and tap+ on the top right, just follow the instructions in the Meross app and you will set it up in minutes.
  • If you want to use HomeKit with an iOS device after setup on Android. Just launch your Home app and scan or input the code printed on the device or user manual. No reset or extra configuration needed

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-3

For iOS users, please follow the instructions below.

  • Please ensure that your iPhone or iPad is connecting to a 2.4GHz Wi-Fi. Or you may not be able to set it up.
  • Please make sure you are having iOS 12 or above. We recommend you upgrade to iOS 13 to have a better HomeKit user experience.
  • Use the Apple Home app instead of the Meross app to set it up. Just launch your Home app and tap “Add Accessory” or+ on the top right and follow the instructions.
  • It may take a few minutes and then you’ll be all set. The setup code and QR code are printed on the device and the user manual

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-4

  • If the QR code won’t work, please tap “Don’t Have a Code or Can’t Scan” and choose MSS620. Input the code on the label and wait. You should be able to set it up in a minute

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-5

  • After that, if you’d like to manage your MSS620 in the Meross app, please connect your iPhone to the same home Wi-Fi launch your Meross app, and tap+ on the top right. It will help you find devices in the same Wi-Fi network. Just tap add and you’ll be able to manage MSS620 in the Meross app. For example, upgrading firmware and binding to Amazon or Google voice assistants.

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-6

Note :

  • According to Apple HomeKit, the only way to set up HomeKit accessories with iOS is the Home app. you don’t want to set up with the Home app, you will have to use an Android device.
  • If you can’t set up the device with the Home app. It might be that the iOS is having a cache issue with the Homekit device. Please try to
    • Reset the device kill the Home app and retry.
    • Restart your iOS and retry. (This is important.)
    • Ensure that your iOS is connecting to 2.4G of your home Wi-Fi.
    • Have your iOS to forget all other Wi-Fi in your home You can also contact us at support@meross.com. We are always happy to help.
  • Relocate MSS620 to your desired place. No extra configuration is required. Please make sure your desired place is covered by Wi-Fi.

Waterproof IP44

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-7

LED and Button Rules

meross-MSS620BHK-Compatible-Outdoor-Smart-Plug-fig-8.

How to Use

General Settings

  • Device name: Change device name.
  • LED: Turn on/off the LED indicator.
  • User manual: Check the user manual.

Voice Control.
Amazon Alexa & Google Assistant: Check how to pair Amazon Alexa and Google Assistant on Account->lntegration

Apple HomeKit with Siri and remote control (iOS only)

Widgets
Widgets are quick access to your Meross devices and Scenes. To enable it, please go to Account-> Widget to add shortcuts first. Then follow the below steps on your smartphone to activate them.

For iPhones:

  • Swipe to the right on your Home or Lock screen.
  • Scroll down to the bottom of your widget list and then tap edit.
  • Scroll down to find Meross and add it.

For Android smartphones:

  • On the home screen, tap and hold on an available space.
  • Tap Widgets, find the Meross widget, and then add it.

Troubleshooting FAQ

At Meross we strive to assure your satisfaction. We are happy to assist at support@meross.com

What devices can I control with the Smart Wi-Fi Outdoor Plug?
You can control lights, fans, humidifiers, portable heaters, and outdoor electric appliances in accordance with the MSS620’s specifications (up to l0A ).

What should I do when my Meross app is unable to control the added Smart Wi-Fi Outdoor Plug?
You can troubleshoot the following:

  • If you paired MSS620 with the Home app, please add MSS620 again by Merossapp.
  • Check whether your home Wi-Fi is connected to the internet or not.
  • Make sure the password of your home Wi-Fi hasn’t been changed.
  • Make sure your MSS620 is covered by your home Wi-Fi. Moving it closer to a Wi-Fi router or installing a Wi-Fi range extender would help.
  • If all else fails, please factory reset your MSS620 and try to add it again.

Why my iOS will require me to use the Home app when setting it up?
This is required by Apple iOS. If you want to manage your device in the Meross app, please launch your Meross app after the setup and tap+ on the top right. Meross app will find devices in the same Wi-Fi network.

My Home app can’t add the device by scanning the QR code.
You can tap “Don’t Have a Code or Can’t Scan” and input the code manually.

I can’t pair my device with HomeKit anyhow.
Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you have iOS 12 or above. Restarting your iOS will help due to some system cache issues.

Warranty

Meross products are covered by a 12-month limited warranty from the date of their original purchase. If any problems occur, please contact support@meross.com for help. We can only provide aftersales service for products that are sold by Meross or Meross-authorized retailers and distributors.

Disclaimer

  • The function of this smart outdoor plug is tested under a typical circumstance described in our specification. Meross does NOT guarantee that under all circumstances will the smart plug perform the same way as described.
  • By using any third-party services such as Amazon Alexa, Google Assistant, or Apple HomeKit. Consumers acknowledge that all data and privacy collected by such third parties are not covered by Meross, nor Meross would take any legal responsibility. Meross only takes responsibility for what’s covered by Meross Privacy Policy. Consumers acknowledge understanding this clearly by reading this document.
  • Any damage caused by ignoring WARNING is not covered by Meross aftersales and Meross will take NO legal responsibility. Consumers acknowledge understanding this clearly by reading this document.

FCC

Compliance Information Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  • This device may not cause interference.
  • This device must accept any interference, including interference that may cause undesired operation of the device

Meross

FAQs

What is the most MSS620BHK Compatible Outdoor Smart Plug?

The most MSS620BHK Compatible Outdoor Smart Plug is a smart home device designed for outdoor use, allowing users to remotely control and schedule the power supply to connected devices such as outdoor lights, pumps, and other outdoor electrical appliances.

How does the most MSS620BHK Outdoor Smart Plug work?

The meross MSS620BHK Outdoor Smart Plug connects to your home Wi-Fi network and can be controlled via a mobile app. Users can turn connected devices on or off, set schedules, and monitor energy usage remotely through the app.

Is the Meross MSS620BHK compatible with voice assistants?

Yes, the most MSS620BHK Outdoor Smart Plug is often compatible with popular voice assistants like Amazon Alexa and Google Assistant, allowing users to control connected devices using voice commands.

Can the meros MSS620BHK Outdoor Smart Plug be used with multiple outdoor devices?

Yes, the meross MSS620BHK is designed to accommodate multiple outdoor devices simultaneously. Users can plug in different appliances and control them independently or collectively through the smart plug.

Is the Meross MSS620BHK suitable for all weather conditions?

Yes, the Meross MSS620BHK Outdoor Smart Plug is typically designed to withstand various weather conditions, making it suitable for outdoor use in rain, snow, and other challenging environments.

What is the wireless range of the most MSS620BHK Outdoor Smart Plug?

The wireless range of the most MSS620BHK may vary, but it is generally designed to work within the standard range of a home Wi-Fi network, providing reliable connectivity to the smart plug from a reasonable distance.

Can the meros MSS620BHK Outdoor Smart Plug be scheduled for specific times?

Yes, users can schedule the meross MSS620BHK to turn on or off at specific times using the mobile app. This feature allows for convenient automation of outdoor devices, such as garden lights or sprinkler systems.

Does the Meross MSS620BHK support energy monitoring?

Yes, the meross MSS620BHK Outdoor Smart Plug often includes energy monitoring features, allowing users to track the power consumption of connected devices and make informed decisions about energy usage.

Is the meross MSS620BHK easy to install?

Yes, the most MSS620BHK is typically designed for easy installation. Users can follow the provided instructions to connect the smart plug to their Wi-Fi network and start using it with the accompanying mobile app.

Can the meross MSS620BHK Outdoor Smart Plug be used with third-party smart home platforms?

Yes, the meross MSS620BHK is often compatible with popular smart home platforms, allowing users to integrate it into their existing smart home ecosystems and control it through a central hub or platform.

Is technical support available for the meross MSS620BHK Outdoor Smart Plug?

Many manufacturers offer technical support and customer assistance for the meross MSS620BHK to address setup, usage, and troubleshooting questions.

Does the meross MSS620BHK Outdoor Smart Plug have manual control buttons?

The meross MSS620BHK often includes manual control buttons on the device itself, allowing users to manually turn devices on or off without using the mobile app or voice commands.

Can the meross MSS620BHK be used for holiday lighting and decorations?

Yes, the meross MSS620BHK is ideal for controlling holiday lights and outdoor decorations, providing a convenient way to schedule and manage festive lighting displays.

Is the meross MSS620BHK compatible with 5GHz Wi-Fi networks?

The meross MSS620BHK is typically designed to work with 2.4GHz Wi-Fi networks. Users should ensure their Wi-Fi network is operating on the compatible frequency for proper functionality.

Can the meross MSS620BHK Outdoor Smart Plug be used with a smart home hub?

Yes, the meross MSS620BHK is often compatible with smart home hubs, allowing users to integrate it into a centralized smart home control system if they have one.

Is the meross MSS620BHK Outdoor Smart Plug designed for long-lasting outdoor use?

Yes, the meross MSS620BHK is typically built to be durable and weather- resistant, ensuring it can provide reliable outdoor smart home solutions for an extended period.

Video-introduction

Download This PDF Link : meross MSS620BHK Compatible Outdoor Smart Plug User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals