SmallRig ST-25 Pro Portable Selfie Stick Tripod User Manual
- July 7, 2024
- SmallRig
Table of Contents
SmallRig ST-25 Pro Portable Selfie Stick Tripod
Thank you for purchasing Small Rig’s product.
In the Box
- Tripod X 1
- Remote Control X 1
- Storage Bag X 1
- USB-C Charging Cable X 1
- User Manual X 1
- Operating Instruction X 1
- Guarantee Card X 1
Method of Use
- Open the phone holder.
- Press “PUSH” at the base and spread the legs to the maximum angle.
- Extend the telescopic pole to the desired height and place it on a flat surface.
- Be careful not to pinch your fingers when folding the legs.
Ps: Be careful not to pinch your fingers when folding the legs.
Suction Cup Phone Holder
- Determine the landscape or portrait orientation. The suction cup can rotate 360°.
- When using a phone with magnetic functionality, slide the auxiliary clip to the edge of the suction cup and attach the phone to the suction cup.
- When using a phone without magnetic functionality, remove the auxiliary clip and pull it apart on both sides, then place the phone inside the holder.
Remote Control
-
Disassembly : Turn the selfie stick upside down and gently pull the bottom of the remote control outward.
-
Installation : Place the top of the remote control into the slot, and then push the bottom in.
-
Connection
-
Press and hold the remote control shutter button for 3 seconds, and the green light will flash to indicate the pairing mode.
-
Turn on your phone’s Bluetooth, search for the remote control named “SmallRing ST-25 Pro’, and pair it.
-
A solid green light on the remote control indicates a successful connection.
-
Taking Photos: Open your phone’s camera app and press the remote control button to take a photo.
-
Turn On/Off: Press and hold for 3 seconds to turn on/off.
-
Charging:
-
When the battery level is low, the red indicator light will start to flash.
Please charge it promptly. -
Use the included USB-C charging cable to charge the remote control through the charging port.
-
Sleep Mode:
-
If turned on without a paired connection, it will automatically enter sleep mode after l O minutes, with the indicator light turning off.
-
After pairing with the phone, it will automatically enter sleep mode after not taking photos for l O minutes. If left unused for 30 minutes, it will automatically shut down.
-
To wake from sleep mode: While in sleep mode, briefly press the photo button, the photo indicator light will flash, then enter pairing mode.
Specifications
| Material(s) | ABS, Aluminum Alloy ABS, |
|---|---|
| Work Height | l .5in – 52.0in 390.0mm -1320.0mm |
| Payload | 17.6oz 0.5kg |
| Storage Height | 9.5in 240.0mm |
| Telescopic Pole Segments | 7 |
| Battery Parameter | 3.7V / 50mAh |
0.185Wh
Battery Input| 5V=2A
BLE BLE| V5.2
Remote Control Range| 32.8ft
10.0m
Phone Clamp Capacity| 2.2in – 3.3in
55.0mm – 85.0mm
Specifications subject to change without prior notice. Please refer to the physical product for the most up-to-date information.