SmallRig 4521 Night Eagle Cage Kit For Nikon Instruction Manual
- July 6, 2024
- SmallRig
Table of Contents
SmallRig 4521 Night Eagle Cage Kit For Nikon
Operating Instruction
- Thank you for purchasing SmallRig’s product.
- Please read this Operation Guide carefully.
- Please follow the safety warnings.
Specifications
Product Details
Cage
- l/4″-20 Threaded Hole
- 3/8″-16 Threaded Hole
- ARRI 3/8″-16 Locating Hole
- Arca-Swiss Quick Release Plate
- NATO Rail
- Cold Shoe Mount
- Strap Slot
- QD Socket
- Dual-Head Wrench
- M2.5 Screw
Top Handle
- Wl/4″-20Threaded Hole
- ARRI 3/8″-l 6 Locating Hole
- Cold Shoe Mount
- Cold Shoe with Anti-off Pin
Cage Installation Instruction
- Remove the split D-ring on both sides before installing the cage.
- Install the camera into the cage from the back.
-
- Install the cage by tightening the l/4″-20 screw on the bottom.
- Remove the two M2.5 screws at both sides of the cage, then pass the M2.5 screws through the shoulder strap holes on both sides of the camera and tighten them onto the cage.
Cold Shoe Mount Installation Instruction
Attach the cold shoe to the top or both sides of the cage where there are
built-in l /4″-20 locating holes.
Top Handle Installation Instruction
- Align the top handle with the ARRI 3/8′-l 6 locating hole on the cage.
- Tighten the ARRI 3/8′-l 6 locating screw by the Dual-Head Wrench.
Screw Storage Solution
Open the silicone cover on the left side of the handle to store or access
screws (such as l /4″-20 screws, 3/8″-l 6 screws, M2.5 screws).
HDMI & USB-C Cable Clamp Installation Instruction
- Press the button to rotate the cable clamp and open the camera interface cover.
- Flip the clamp back. and insert the HDMI & USB-C cables.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>