HUNTER 30215 HEPA Air Purifier Owner’s Manual
- July 6, 2024
- Hunter
Table of Contents
HUNTER 30215 HEPA Air Purifier
Product Information
The HUNTER 30215 is a True HEPA Air Purifier designed to remove 99.97% of particles 0.3 microns in size from the air. It features an activated carbon pre-filter that helps eliminate cooking, smoke, and pet odours while trapping lint, hair, and large particles to enhance the lifespan and efficiency of the HEPA filter.
Specifications:
- Model: HUNTER 30215
- Air Purifier Type: True HEPA
- HEPA Filter Model: 30940
- Pre-Filters Model: 30901
Product Usage Instructions
Important Safety Instructions:
- Place the Air Purifier on a flat, level surface at least six inches away from walls and heat sources.
- Keep the Air Purifier out of reach of children.
- Inspect the power cord for damage before use.
- Use the polarized plug correctly and always unplug when not in operation or during maintenance.
- Avoid moving the Air Purifier while it is operating and never immerse it in water.
Setting Up Your Air Purifier:
- Remove the air purifier from the box and clear the plastic protective bag.
- Open the front grill before turning the Air Purifier on.
- Confirm proper installation of the HEPA filter by checking orientation and seal.
- Ensure the carbon pre-filter covers the grill vents inside the front grill.
- Place the filter installation reminder sticker on the inside edge of the front grill.
FAQ:
-
Q: How often should I replace the HEPA filter and pre-filter?
A: The HEPA filter should be replaced every 6-12 months, while the pre-filter should be replaced every 3 months for optimal performance. -
Q: Can I wash the filters?
A: No, do not wash the filters. Replace them as instructed in the manual to maintain efficiency.
Other Model
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER AND SAVE THESE IMPORTANT INSTRUCTIONS.
- This Air Purifier is designed for use on a flat, level floor and may not work properly on an uneven floor. ALWAYS place this Air Purifier on a firm, level floor. ALWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.
- Place the Air Purifier in an area that is out of the reach of children.
- Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use this product if the cord has been damaged.
- This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature.
- ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned.
- DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.
- DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions.
Introduction
Thank you for purchasing the QuietFlo® True HEPA Air Purifier from Hunter Fan
Company. You have purchased our latest development in portable Air Purification
Systems. This system has been developed to improve the quality of the air you
breathe.
Our QuietFlo® True HEPA Air purifier outperforms other air purification systems
by quickly and effectively removing dust, smoke, and pollen particles. Room
air is pulled in through the front grill and cleaned across the HEPA filter.
Clean air is then released out the top grill.
The HEPA filter will remove 99.97% of particles 0.3 micros in size from air
that passes through the filter.
The activated carbon pre-filter helps remove cooking, smoke, and pet odours
from the air. It also traps lint, hair and large particles, which helps
improve the life and performance of the HEPA filter.
Setting Up Your Air Purifier
-
Remove your air purifier from the box and take it out of the clear plastic protective bag.
-
Place your QuietFlo® Air Purifier on a firm, flat floor.
-
Before turning the Air Purifier ‘on,’ open the front grill.
- For Models 30117, 30119 & 30145: To release the front grill, press the buttons on the side until the front grill slides easily over the buttons. (Refer to Figure 1.)
- For Models 30095, 30214 & 30215: To release the front grill, place your
fingers behind the tabs and pull forward. (Refer to Figure 2.)
-
The HEPA filter is already installed in the correct position, but you need to confirm that it is fully inserted. To remove, grasp the edge of the filter frame and pull it forward. Notice the orientation of the flaps and seal, which should be pressed firmly into the filter opening.
-
The carbon pre-filter is mounted inside of the front grill with “hook” tape. Con-firm that it covers the grill vents. (Refer to Figure 3.)
-
Place the filter installation reminder sticker on the inside edge of the front grill. Circle the month and write the year of installation for the pre-filter and HEPA filter.
-
Replace the filter and front grill. Be sure that the bottom grill tabs are in position first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation.
NOTE: This unit will not operate unless the door is placed in the correct position. -
Plug the unit into a 120V electrical outlet.
AIR PURIFIER PARTS
Operating Your Air Purifier
On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time.
Pre-Filter and Filter Timers
This air purifier contains timers that indicate when the pre-filter and filter
should be changed. The timer automatically counts the number of hours that
each filter has been in use. When the pre-filter counter reaches 2000 hours
(approximately three months of use), the pre-filter indicator will be lit to
show that the pre-filter should be changed. When the HEPA filter counter reaches
8000 hours (approximately one year of use), the HEPA filter indicator will be
lit to indicate that the filter should be changed. The exact life of the pre-
filter and filter will depend upon the environment. If necessary, the filters
should be changed more frequently.
The reset the pre-filter or filter timers when one indicator (or both) is lit:
- Change the filter and/or pre-filter as described in the Maintenance section of the manual.
- To reset the counter to zero hours and turn off the indicator, simply press and hold the filter reset key for three seconds. If both the pre-filter and filter indicators are lit, the reset key will first turn off the pre-filter indicator. Then, you must release the reset key and then press and hold the filter reset key again for three seconds to turn off the filter indicator.
The reset the pre-filter or filter timers before the indicators are lit:
In some environments, you may want to change the pre-filter or filter more
frequently than indicated by the filter indicators. This procedure allows you
to reset the pre-filter or filter counter before the indicators are lit.
- Change the filter and/or pre-filter as described in the Maintenance section of the manual.
- Now, you must choose which timer you want to reset. Press and hold the filter reset key (approximately three seconds) until the pre-filter indicator flashes. Press the reset key again to alternate between the two indicators. The timer that will be reset is designated by the flashing indicator.
- Once you have the correct indicator flashing, press and hold the reset key for three seconds to reset that timer to zero hours. The indicator will stop flashing when it has been reset. If needed, repeat these steps to reset the other timer.
Cleaner and Filter Replacement
- Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Remove the pre-filter before cleaning the front grill.
- At least every 90 days, replace the carbon pre-filter. This is necessary to maintain proper odour removal and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it in the Air Purifier.
- While replacing the pre-flutter, you should view the condition of the QuietFlo® HEPA Filter. Compare the filter to the colour-coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Mark the new filter installation sticker included with the new QuietFlo® HEPA Filter. Depending on use and environ-ment, the HEPA Filter should last one year.
- If you notice a decrease in air output or an increase in noise, the HEPA Filter may be clogged. Replace it with a new QuietFlo® HEPA Filter.
Replacement Filters
To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter
for your nearest retailer or Hunter Customer Service at (US)
1-888-830-1326,
(Canada) 1-888-855-8300. Please be
prepared to tell the operator the model number of your Air Purifier and the
model number of the filter you need to replace. Visit our website at
www.hunterfan.com.
- Hunter Air Purifier Model No.: 30095 30117 30119 30145 30214 30215
- Pre-Filter Replacement Model No.: 30901 30901 30901 30901 30901 30901
- HEPA Filter Replacement Model No.: 30936 30936 30936 30938 30940 30940
Electrical Cord Storage
For your convenience, Model 30145 has cord wrap posts for easy storage of
the elec-trical cord. The cord wrap posts are located on the back of the air
purifier in the bottom corners.
When received, the cord wrap posts will be in the collapsed position. To
extend the cord wrap posts, simply twist approximately 1⁄8 of a rotation and
gently pull outward. The post will extend approximately 0.5 inches. (Refer to
Figure 4.) Once extended, simply wrap the cord around the two posts until the
desired length is obtained.
How the QuietFlo® System Works
Above is an illustration of how the QuietFlo® True HEPA Air Purifier works. Dust and other irritants are pulled into the air purification system and cleaned through the HEPA Filter. Clean, purified air is released into the room.
Other Home Comfort Products from Hunter
To learn more about Hunter Fan Company products, please see our Web page at: www.hunterfan.com
LIMITED WARRANTY
The Hunter Fan Company makes the following limited warranty to the original
residential user or consumer purchaser of the QuietFlo® True HEPA Air Purifier:
If any part of your QuietFlo® True HEPA Air Purifier motor fails during the
first five (5) years from the date of installation due to a defect in material
or workmanship, we will provide a replacement Air Purifier free of charge.
Installation is deemed to occur at the date of purchase.
If the Air Purifier cord, ionizer, or front grill fails any time within one (1)
year after installation due to a defect in material or workmanship, we will
replace or, at our option, repair the unit free of charge at our nearest
service centre or at our Service Department in Memphis, Tennessee. You will be
responsible for all parts and labor costs after this one year.
THE USE OF A NON-HUNTER FILTER WILL INVALIDATE THIS WARRANTY. IF THE ORIGINAL
RESIDENTIAL USER OR CONSUMER PURCHASER CEASES TO OWN THE AIR PURIFIER, THIS
WARRANTY AND ANY IMPLIED WARRANTY THAT THEN REMAINS IN EFFECT, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE VOIDED.
NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE FILTER MATERIAL
OR CARBON FILTER.
THE WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF AN
IMPLIED WARRANTY INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO THE MOTOR
IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE.
This warranty is voided if the air purifier is not purchased and use in the USA
or Canada.
This warranty excludes and does not cover defects, malfunctions or failures of
the Air Puri-fier which were caused by repairs by persons not authorized by us,
use of parts or accessories not authorized by us, mishandled, modifications, or
damage to the Air Purifier while in your possession, or unreasonable use,
including failure to provide reasonable and necessary maintenance. This
warranty does not cover Air Purifiers used in commercial applications. There
are no express or implied warranties as to commercial purchasers or users.
To obtain service, contact the nearest Hunter authorized service center or the
Hunter Fan Company Service Department, 2500 Frisco Avenue, Memphis, Tennessee
38114, 1-888-830-1326. For the name of
our nearest authorized Hunter Fan Company Service Center, write to the Hunter
Fan Company at the preceding address. You will be responsible for insurance
and freight or other transportation to our factory service center. We will
return the Air Purifier freight prepaid. The Air Purifier should be properly
packaged to avoid damage in transit since we will not be responsible for any
such damage. Proof of purchase is required when requesting warranty service.
The purchaser must present sales receipt or other document that establishes
proof of purchase.
IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL
CONSEQUENTIAL OR INCIDENTAL DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE AIR
PURIFIER. YOUR SOLE REMEDY WILL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE.
SOME AMERICAN STATES AND CANADIAN PROVINCES DO NOT ALLOW:
- LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS;
- THE EXCLUSION OR LIMITATION OF DIRECT, INDIRECT SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES;
SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
PROVINCE TO PROVINCE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>