NEXGRILL 720-0825 LP Gas Grill Installation Guide

NEXGRILL 720-0825 LP Gas Grill

Specifications

• Model: 720-0825
• Type: LP Gas Grill
• Brand: Nexgrill
• Intended Use: Outdoor

Product Usage Instructions

• Before using the grill, carefully read the manual to reduce the risk of fire, burn hazard, or injury. This grill is designed for outdoor use only and should not be installed in or on recreational vehicles or boats.
• Refer to the package contents list to ensure all parts are included before assembly.
• Prepare the grill for assembly by checking all parts and tools required. Ensure a safe and flat surface for assembly.
• Refer to the parts diagram to familiarize yourself with the components of the grill before assembly.
• If replacement parts are needed, refer to the list provided to ensure compatibility with your model.
• Follow the step-by-step assembly instructions provided in the manual to assemble the grill correctly.
• Once assembled, follow the installation instructions to place the grill in the desired outdoor location safely.
• Learn how to operate the grill safely and effectively by following the detailed operating instructions in the manual.
• Ensure the longevity of your grill by following the care and maintenance instructions provided. Regular cleaning and inspection are essential.
• If you encounter any issues with the grill, refer to the troubleshooting section for guidance on common problems and solutions.
• Review the warranty information provided to understand coverage and procedures for warranty claims.

FAQ

• Q: What should I do if I smell gas around the grill?
• A: If you smell gas, shut off the gas to the appliance, extinguish any open flame, open the lid, and if the odour continues, keep away from the appliance and immediately call your gas supplier or fire department.
• Q: Can I store gasoline near the grill?
• A: Do not store or use gasoline or other flammable liquids or vapours in the vicinity of this or any other appliance to prevent hazards.

WARNING
TO reduce the risk of fire, burn hazard or another injury, read the manual carefully and completely before using your grill.
WARNING
FOR OUTDOOR USE ONLY.
WARNING
This grill is not intended to be installed in or on recreational vehicles and/or boats.

DANGER

If you smell gas:

1. Shut off the gas to the appliance.
2. Extinguish any open flame.
3. Open the lid.
4. If the odour continues, keep away from the appliance and immediately call your gas supplier or your fire department.

WARNING

1. Do not store or use gasoline or other flammable liquids or vapours in the vicinity of this or any other appliance.
2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

SAFETY INFORMATION

• WARNING – Hazards or unsafe practices that COULD result in severe personal injury or death.
• CAUTION – Hazards or unsafe practices that COULD result in minor personal injury.
• WARNING Do not try lighting this appliance without first reading the “LIGHTING INSTRUCTIONS” section of this manual.
• WARNING Do not use the grill if the odor of gas is present. Contact customer service at 1-800-913-8999.
• WARNING Never attempt to use damaged equipment. See your local liquid propane dealer for repair.
• WARNING Check all gas supply fittings for leaks before each use. Do not use the grill until all connections have been checked and do not leak. Do not smoke while leak testing. Never leak test with an open flame.
• WARNING Do not install this unit into combustible enclosures. There should be a minimum clearance of 24 inches from all sides to combustible materials.
• WARNING This grill is not intended to be installed in or on recreational vehicles and/or boats.
• WARNING Do not store grills indoors unless the cylinder is disconnected. Do not store cylinders in a building, garage, or any other enclosed area, and keep them out of reach of children at all times.
• WARNING Maximum LP gas tank size is 12 inches in diameter by 18-1/2 inches tall. Do not use a tank without an Overfill Prevention Device (OPD), which prevents the tank from being overfilled and possibly damaging your grill.
• WARNING When lighting, keep your face and hands as far away from the grill as possible.
• WARNING Do not leave the grill unattended while cooking.
• WARNING Failure to properly place the burner over the orifice could cause a fire to occur behind and beneath the valve panel, thereby damaging the grill and making it unsafe to operate.
• CAUTION When using a match to light the grill, make sure to use the attached lighting rod.
• CAUTION When using the rotisserie burner, remove the warming rack. The high heat from the burner may cause the warming rack to bend.
• WARNING Spiders and insects can nest inside the burners of the grill and disrupt gas flow. Inspect the grill at least twice a year.
• CAUTION Before cleaning, make sure the gas supply and control knobs are in the “OFF” position and the burners have cooled.
• CAUTION The grill head is heavy and will require two or more people to lift and position it onto the grill cart.

BEFORE LIGHTING

• Inspect the gas supply hoses before turning on the gas. If there is evidence of cuts, wear, or abrasion, it must be replaced before use.
• Only the pressure regulator and hose assembly supplied with the unit should be used. Never substitute regulators for those supplied with the grill. Contact customer service for proper replacement.
• Screw the regulator (type QCCl) onto the cylinder. Leak check the hose and regulator connections with a soap and water solution before operating the grill (See “Leak Testing” instructions on page 20).
• Do not turn on the gas at the LP gas cylinder unless the gas hose is properly connected to the side burner gas pipe system and all burner valves are in the “OFF” position.
• Keep a spray bottle of soapy water near the grill and check the connections before each use.

LP GAS CYLINDER WARNING

1. Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.
2. A liquid propane cylinder not connected for use should not be stored in the vicinity of this or any other appliance.
3. Do not store spare liquid propane gas cylinders under or near this appliance.
4. Never fill the cylinder beyond 80 per cent capacity.
5. Liquid propane cylinders must be provided with a listed overfilling prevention device.
6. If the information above is not followed exactly, a fire resulting in death or serious injury could occur.

WARNING
Do not try lighting this appliance without first reading the “LIGHTING INSTRUCTIONS” section of this manual.

CALIFORNIA PROPOSITION 65 WARNING
The burning of gas fuel generates some byproducts, which are known by the State of California to cause cancer or reproductive harm.
To minimize exposure to these substances, always operate this unit according to the care and use manual, ensuring you provide good ventilation when cooking with gas.

TESTED per ANSI Z21.58a LATEST STANDARD and CGA 1.6a-2008 STANDARD FOR OUTDOOR COOKING GAS APPLIANCES. THIS GRILL IS FOR OUTDOOR USE ONLY.
Check your local building codes for the proper method of installation. In the absence of local codes, follow either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code, Electrical Code, ANSI/NFPA 70

SAFETY PRACTICES TO AVOID INJURY

• When properly cared for, your grill will provide safe, reliable service for many years. However, extreme care must be used as the grill produces intense heat that can increase accident potential.
• When using this appliance basic safety practices must be followed, including the following:
• Do not repair or replace any part of the grill unless specifically recommended in this manual. All other services should be referred to a qualified technician.
• The grill is for outdoor use only.
• The grill is not intended to be installed in or on recreational vehicles and/or boats.
• Children should not be left alone or unattended in an area where the grill is being used. Do not allow children to sit, stand or play on or around the grill at any time.
• Do not store items of interest to children around or below the grill or cart. Do not allow children to crawl inside the cart.
• Never let clothing, pot holders or other flammable materials come in contact with or too close to any grate, burner or hot surface until it has cooled. The fabric could ignite, causing serious personal injury.
• For personal safety, wear proper apparel. Loose-fitting garments or sleeves should never be worn while using this appliance. Some synthetic fabrics are highly flammable and should not be worn while cooking.
• Only certain types of glass, ceramic, earthenware, or other glazed utensils are suitable for grill use. Other types of materials may shatter with sudden temperature changes. Use only low or medium heat settings by the manufacturer’s guidelines.
• Do not heat unopened food containers as a build-up of pressure may cause the containers to burst.
• Use a covered hand when opening the grill lid. Never lean over an open grill.
• When lighting a burner, always pay close attention to what you are doing. Make certain you are aware of which burner you are lighting so that your body and clothing remain clear of open flames.
• When using the grill, do not touch the grill rack, burner grate or immediate surroundings as these areas become extremely hot and could cause burns. Use only dry potholders. Moist or damp potholders on hot surfaces may cause steam burns. Do not use a towel or bulky cloth in place of potholders. Do not allow potholders to touch hot portions of the grill rack.
• Grease is flammable. Let hot grease cool before attempting to handle it. Do not allow grease deposits to collect in the grease tray at the bottom of the grill’s firebox. Clean the grease tray often.
• Do not use aluminium foil to line the grill racks or grill bottom. This can severely upset combustion airflow or trap excessive heat in the control area.
• For proper lighting and performance of the burners, keep the burner ports clean. It is necessary to clean them periodically for optimum performance. The burners will only operate in one position and must be mounted correctly for safe operation.
• Exercise caution when cleaning the grill. To avoid steam burns, do not use a wet sponge or cloth to clean the grill while it is hot. Some cleaners produce noxious fumes or can ignite if applied to a hot surface.
• Never use a dented or rusty propane cylinder.
• Turn off all control knobs and make certain the grill is cool before using any type of aerosol cleaner on or around it. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.
• Do not use the grill to cook excessively fatty meats or other products, which promote flare-ups.
• Do not operate the grill under unprotected combustible constructions. Use only in well-ventilated areas. Do not use in buildings, garages, sheds, breezeways or other such enclosed areas.
• This unit is intended for outdoor use only.
• Keep the areas surrounding the grill free from combustible materials including, fluids, trash, and vapours such as gasoline or charcoal lighter fluid. Do not obstruct the flow of combustion and ventilation air. If the unit is stored indoors, make sure it is cool.
• Do not use briquettes of any kind in the grill.
• This liquid propane gas grill is designed for optimum performance without the use of briquettes. Do not place briquettes on the flame tamers as this will block the vent to the grill burners. Adding briquettes can damage ignition components, thus voiding the warranty.
• Keep the back of the cart free and clear from debris. Keep any electrical supply cord and the fuel supply hose away from any heated surface.
• Never use the grill in extremely windy conditions. If located in a consistently windy area (oceanfront, mountaintop, etc.), a windbreak will be required. Always adhere to the clearance specifications.

PLACEMENT OF THE GRILL

WARNING

• Do not install this unit in combustible enclosures. There should be a minimum clearance of 24 inches from all sides to combustible materials.
• Outdoor cooking appliances should not be used under overhead combustible construction.
• When determining a suitable location take into account concerns such as exposure to wind, proximity to traffic paths, and keeping gas supply lines as short as possible.
• Place the grill in well-ventilated areas. Never place the grill in a building, garage, breezeway, shed or other such enclosed areas. During heavy use, the grill will produce a lot of smoke.

PACKAGE CONTENTS LIST

HARDWARE CONTENTS – Pre-installed as noted in the instructions that follow

PREPARATION

Before beginning assembly, make sure all parts are present. Compare parts with the package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 40 minutes
• Tools Required for Assembly:
• Phillips Screwdriver (not included) and Wrench (not included)
• Note: The right and left sides of the grill are designated as if you are facing the front of the grill.

PARTS DIAGRAM

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-800-913-8999, 7 a.m. – 5 p.m., PST, Monday- Friday.

ASSEMBLY INSTRUCTIONS

Cart Assembly

• Place the Cart Caster Insert (K) into the Cart Leg, Front Left (F) and Cart Leg, Back Left (G). As shown in Fig. 1.

• Loosen, but do not remove the screws that are pre-assembled on the Cart Leg, Front Left (F) and Cart Leg, Back Left (G). Attach the Cart Leg, Front left (F) and Cart Leg, Back Left (G) to the Cart Frame (H) by aligning the holes on the Cart Frame (H). Tighten the screws that were loosened above.

• Note: Make sure the flat side of Cart Frame (H) faces out to the left when attaching. As shown in Fig. 2.

• Loosen, but do not remove the screws that are pre-assembled on the Cart Leg, Front Right (I) and Cart Leg, Back Right (J). Attach the Cart Leg, Front Right (I) and Cart Leg, Back Right (J) to the Cart Frame (H), by aligning the holes on the Cart Frame (H). Tighten the screws that were loosened earlier.

• Note: Make sure the flat side of the Cart Frame (H) faces out to the right when attaching. As shown in Fig. 3

Bottom Panel Assembly

• Loosen, but do not remove the screws that are pre-assembled on the side of the Bottom Panel (B).
• Align the holes on the Cart Leg, Front Left (F) and Cart Leg, Back Left (G). Place the Cart Legs onto the screws that were loosened in the Bottom Panel (B). As shown in Fig. 4.
• Tighten the screw from outside to inside. There are holes on the outside of the cart leg to fit the screwdriver through. As shown in Fig. 4.
• Repeat the same procedure to attach the right cart legs to the bottom panel.

Triangle Bracket Assembly
Note: The flat side of the triangle should face away from the grill.

• Loosen, but do not remove four screws on Bottom Panel (B), two screws on Cart Leg, Back Left (G) and two screws on Cart Leg (J), Back Right. Align the holes of the Triangle brackets with the screws in the Bottom Panel (B) and Cart Leg, Back Left (G) and Cart Leg, Back Right (J) to connect the Triangle Bracket, Left and Right (O, P) to Cart Leg, Back Left (G) and Cart Leg, Back Right (J). As shown in Fig. 5
• Tighten the screws.

Front Panel Assembly

• Loosen, but do not remove the screws which are pre-assembled on the cart legs, align the holes of the bottom front panel (S) with the screw in the legs, then place the front panel (S) onto the screws in the cart legs. As shown in Fig. 6.
• Tighten the screws that were loosened in step 4a.
• Note: Flat facing side of the front panel (S) should face out.
• Repeat steps 4a and 4b to assemble the second front panel (S).

Wheel Assembly

• Remove the nuts and washers which are pre-assembled on the short axle, and place the wheels (C) on the Axle attached to the Cart Leg, Front Right (I) and Cart Leg, Back Right (J). As shown in Fig. 7.
• Place washers closest to the wheel and then place and tighten the nuts on the axle that were removed in step 5a.

Diagonal Bar Barrier Assembly

• Loosen but do not remove the one screw which is pre-assembled on the Bottom Panel (B).
• Secure the solid end of the Diagonal Bar Barrier (Y) to the underside of the Front Panel (S), then secure the other end of the Diagonal Bar Barrier (Y) by clipping the open hole onto the screw pre-assembled on the Bottom Panel (B). Tighten the loosened screw. As shown in Fig. 8.

Cart Beam Assembly

• Insert the Cart Beam (R) into Cart Leg, Back Left (G) and Cart Leg, Back Right (J), aligning the holes. The Cart Beam (R) will fit into holes as shown in Fig. 9. Secure the Cart Beam by pressing it firmly into the holes of the Cart Legs.

Firebox Assembly

NOTE: We suggest two persons to lift the firebox during assembly. Be sure to remove all packaging material during assembly.

• Remove two screws which are pre-assembled on the Cart Leg Back Right (J) and Cart Leg Back Left (G). As shown in Fig. 11. A.

• Remove the four screws that are attached to the cart frame (H). 2 screws on the left and 2 on the right.

• Remove the Firebox Assembly (A) from the carton and carefully place onto the grill cart. The lid handle will face the front and be above the front panel. As shown in Fig. 10.

• Once the firebox is in place, secure the Firebox Assembly (A) to Cart Leg Back Right (J) and Cart Leg Back Left (G) using the screws removed in step 8a. As shown in Fig. 11. A.

• From inside the firebox, install the four screws that were removed in step 8b securing the firebox to the cart frames. As shown in Fig. 11. B.

Side Burner Shelf Assembly

• Loosen but do not remove the screw which is pre-assembled on the cart leg. Remove the two screws that are attached to the Side Burner Shelf (D) frame and the two screws that are attached to the main control panel.

• Align the holes on Side Burner Shelf (D) with the loosened screws located on the cart leg.

• Secure Side Burner Shelf (D) from inside the firebox using two screws that were removed in step 9a to attach the Side Burner Shelf (D) to the main firebox. Secure the Side Burner Shelf Control Panel (D) and main control panel by one screw which is pre-assembled on the main control panel. As shown in Fig. 12. Tighten all screws.

• Tighten screws loosened in 9b. Ensure all screws are tight.

Left Side Shelf Assembly

• Repeat Step 9 to assemble the Left Side Shelf (E). As shown in Fig.13.

Side Burner Valve Installation

• Remove the two 4mm screws with locking washers that are pre-attached to the valve. Then place the Bezel (L) on the Side Burner Shelf (D) control panel. From underneath, insert the side burner valve into the Side Burner Shelf (D) control panel and Bezel (L).

• Align the holes in the Bezel (L) with holes in the valve and attach with two 4mm screws.

• The two screws hold the bezel, control panel, and valve together. As shown in Fig. 14.

• Using a hex key, ensure the inset screw on the knob is loosened, but not removed. Insert Side Burner Control Knob (M) onto the valve stem and tighten the inset screw with a hex key (FF). As shown in Fig. 15.

Side Burner Installation

• From underneath the side burner remove two screws that are assembled on the bottom of the side burner shelf (D). Open the side burner lid and place the Side Tube Burner (U) through the opening. Place the Side Tube Burner (U) tube over the side burner gas valve and make sure the Side Burner gas valve is inserted into side burner tube. As shown in Fig.16. Then with two screws secure the side burner from underneath to the Side Burner Shelf (D). As shown in Fig. 16.

• Then with two screws secure the side burner from underneath to the Side Burner Shelf (D). As shown in Fig 16.

• Connect the ignition wire from the Firebox Assembly (A) control panel to the side burner igniter pin from underneath the Side Burner Shelf & Control Panel (D). As shown in Fig. 16.

• Note: After completing the side burner installation, make sure there is no more than a 3 mm gap between the igniter pin and burner. As shown in Fig. 17.

Electronic Igniter Battery Installation

• Unscrew the electronic igniter button and place the battery (V) into the housing with the positive terminal (+) facing outward. Replace the ignition button after the battery has been installed as shown in Fig. 18.

Install the Grease Tray

• Install the Grease Tray (X) from the rear of the grill by sliding the tray on the glides at the rear of the grill until centred under the cooking area. As shown in Figure .19.

Position Flame Tamers and Cooking Grids

• The Flame Tamers (T) are shipped in the main firebox assembly. Please check the placement of and make sure the Flame Tamers (T) in the channels to ensure the Flame Tamers are centred over the burners. As shown in Fig.20.
• The Cooking Grids (N) are also shipped in the Firebox Assembly (A). Place the Cooking Grids (N) in the main firebox assembly before using your grill. The Cooking Grids (N) should be positioned from the front of the firebox to the rear for a proper fit. As shown in Fig.20.

Liquid Propane Tank Installation

• From the rear of the grill place the liquid propane tank into the Bottom Panel (B) hole and tighten the Tank Bolt to secure it. As shown in Fig. 21.

• Always keep the LP cylinder at 90 ° (upright) orientation to provide vapour withdrawal.

Liquid Propane Hook-Up

• Attach the regulator to the propane cylinder by turning the regulator handle clockwise as shown in Fig. 22. If the outdoor cooking appliance is not in use, the gas must be turned “CLOSED” position at the Liquid Propane Cylinder.

• Check all gas supply fittings for leaks before each use. Do not use the grill until all connections have been checked and do not leak (see “Leak Testing” instructions.

INSTALLATION INSTRUCTIONS

GAS HOOK-UP

Only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement pressure regulator and hose assembly must be specified by the grill manufacturer.
This grill is configured for Liquid Propane. Do not use a Natural Gas supply.
Total gas consumption (per hour) with all burners set on “HIGH”:

• Main burners 40,500 BTU/Hr.
• Side burner 12,000 BTU/Hr.
• Total 52,500 BTU/Hr.

The installation of this appliance must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation Code, CSA B149.2.
Installation in Canada must be under the Standard CAN/CGA-B149.2 (installation code for gas-burning appliances and equipment) and local codes.

LIQUID PROPANE CYLINDER REQUIREMENTS (20-lb. Cylinder)

• A dented or rusty Liquid Propane Cylinder may be hazardous and should be checked by your supplier.
• Never use a cylinder with a damaged valve. The Liquid Propane Cylinder must be constructed and marked under the specifications for Liquid Propane Cylinders by the United States Department of Transportation (DOT) or the National Standard of Canada,
• CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods Commission.
• The 20-lb. The cylinder must have a shut-off valve terminating in a valve outlet specified, as applicable, for connection type QCC1 in the standard for compressed gas cylinder valve outlet and inlet connection ANSI/CGA-V-1.
• Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is disconnected and removed from the outdoor cooking gas appliance. The Cylinder system must be arranged for vapour withdrawal. The cylinder must include a collar to protect the Cylinder valve.
• Manifold pressure: (operating) 11-inch water column (W.C.), (non-operating) 11.2-inch water column (W.C.).
• Liquid Propane Cylinders must be provided with a listed overfilling prevention device.
• Remove the plastic valve cover from the Liquid Propane Cylinder. Make sure the grill gas hoses do not contact the grease pan or grill firebox when the Liquid Propane Cylinder is placed into the cart.

CONNECTING THE LIQUID PROPANE CYLINDER

To connect the Liquid Propane Gas Supply Cylinder:

• The cylinder valve should be in the “OFF” position. If not, turn the valve clockwise until it stops.
• Make sure the cylinder valve has the proper type-1 external male thread connections per ANSI Z21.81.
• Make sure the burner valves are in the “OFF” position.
• Inspect the valve connections, port and regulator assembly. Remove debris and inspect the hose for damage.
• When connecting the regulator assembly to the valve, use your hand to tighten the nut clockwise until it stops. The use of a wrench could damage the quick coupling nut and result in a hazardous situation.
• Open the cylinder valve fully by turning the valve counterclockwise.
• Before lighting the grill, use a soap and water solution to check all the connections for leaks.
• If a leak is found, turn the cylinder valve “OFF” and do not use the grill until a local Liquid Propane dealer can make repairs.

Please make sure the cylinder valve connection device shall properly and safely mate with the connection device attached to the inlet of the pressure regulator.

WARNING
Never attempt to use damaged or obstructed equipment. See your local Liquid Propane dealer for repair.

DISCONNECTING THE LIQUID PROPANE CYLINDER

1. Turn the grill burner valves “OFF” and make sure the grill is cool.
2. Turn the Liquid Propane Cylinder valve “OFF” by turning clockwise until it stops.
3. Detach the regulator assembly from the cylinder valve by turning the quick coupling nut counterclockwise.
4. Place a dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

LEAK TESTING
GENERAL
Although gas connections on the grill are leak-tested before shipment, a complete leak test must be performed at the installation site. Before each use, check all gas connections for leaks using the procedures listed below.
If the smell of gas is detected at any time, you should immediately check the entire system for leaks.
BEFORE TESTING
Make sure all packing materials have been removed from the grill, including the burner tie-down straps.

WARNING
Check all gas supply fittings for leaks before each use. Do not use the grill until all connections have been checked and do not leak. Do not smoke while leak testing. Never leak test with an open flame.

Make a solution of one part liquid detergent and one part water. You will need a spray bottle, brush, or rag to apply the solution to the fittings. For the initial leak test, make sure the Liquid Propane Cylinder is full.

TO TEST

1. Turn the burner valves off.
2. Turn the Liquid Propane Cylinder valve counterclockwise to open the valve.
3. Apply the soap solution to all gas fittings. Soap bubbles will appear where a leak is present.
4. If a leak is present, immediately turn the gas supply “OFF” and tighten leaky fittings.
5. Turn the gas back “ON” and recheck.
6. Should the gas continue to leak from any of the fittings, turn the gas supply “OFF” and contact customer service at 1-800-913-8999.
7. If there is evidence of excessive abrasion or wear, or the hose is cut, it must be replaced before the outdoor cooking gas appliance is put into operation.

Only those parts recommended by the manufacturer should be used on the grill. Substitutions will void the warranty.

WARNING

1. Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is disconnected and removed from the outdoor cooking gas appliance.
2. Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area.

INSTALLER FINAL CHECK

• Maintain a specified clearance of 24 inches from combustible materials and construction.
• All internal packaging has been removed.
• The hose and regulator are properly connected to the Liquid Propane Cylinder.
• The unit has been tested and is free of leaks.
• The gas supply shutoff valve has been located.
• All burners are installed.
• Keep the instruction manual for future reference.

WARNING

1. Do not store spare Liquid Propane Cylinders under or near this appliance.
2. Never fill the cylinder beyond 80 per cent capacity.
3. If the information above is not followed exactly, a fire, possibly causing serious injury or death, may occur.

It is very important to keep your appliances clear and away from any combustible materials.
Maintain at least 24 inches of clearance from sides and back and do not use under overhead combustible construction,

OPERATING INSTRUCTIONS

General Use of the Grill
Each main burner is rated at 13,500 BTU/Hr. The main grill burners encompass the entire cooking area and are side-ported to minimize blockage from falling grease and debris. Above the burners are flame tamers. The igniter knobs are located on the centre portion of the valve panel. Each rotary igniter is labelled on the control panel.
Using the Grill
Grilling requires high heat for searing and proper browning. Most foods are cooked at a “HIGH” heat setting for their entire cooking time. However, when grilling large pieces of meat or poultry, it may be necessary to turn the heat to a lower setting after the initial browning. This method cooks the food thoroughly without burning the outside.
Food cooked for a long time or basted with a sugar-based marinade may need a lower heat setting near the end of its cooking time.

To begin

1. Make sure the grill has been leak-tested and is properly placed.
2. Remove any remaining packing materials.
3. Light the grill burners using the Lighting Instructions.
4. Turn the control knob(s) to the “IGNITE / HIGH” setting, and preheat the grill for 15 minutes. The grill lid should be closed during the pre-heat period.
5. Place the food on the grill and cook to the desired degree of preparation. If necessary, adjust the heat setting. The control knob may be positioned at any setting between “HIGH” and “LOW”.

LIGHTING INSTRUCTIONS

Before Lighting

• Inspect the gas supply hose before turning on the gas. If there is evidence of cuts, wear, or abrasion, it must be replaced before use.
• Screw the regulator (type QCC1 ) onto the cylinder, and leak-check the hose and regulator connections before operating the grill (see the “Leak Testing” instructions.
• Only the pressure regulator and hose assembly supplied with the unit should be used. Never substitute regulators. If a replacement is necessary, contact customer service for proper replacement.

WARNING
Do not use the grill if the odour of gas is present. Contact customer service at 1-800-913-8999.

TO LIGHT THE MAIN BURNERS

1. Open the lid during lighting.
2. Make sure all the knobs are in the “OFF” position, and then turn the Liquid Propane Cylinder valve “ON” by slowly turning counterclockwise.
3. Push and turn the Main Burner control knob to IGNITE/HIGH, at the same time, press and hold the electronic ignition button to light the burner.
4. Once the burner is lit, release the electronic ignition button and knob.
5. If ignition does not occur in 5 seconds, turn the knob to OFF, wait 5 minutes and repeat the lighting procedure or light by match.

TO LIGHT THE SIDE BURNER

1. Push and turn the Side Burner control knob to IGNITE/HIGH, at the same time, press and hold the electronic ignition button to light the burner.
2. Once the burner is lit, release the electronic ignition button and knob.
3. If ignition does not occur in 5 seconds, turn the knob to OFF, wait 5 minutes and repeat the lighting procedure or light by match.

TO MATCH LIGHT THE GRILL
If a burner will not light after several attempts using the control knobs, the burners may be lit with a match.
WARNING When lighting, keep your face and hands as far away from the grill as possible.
CAUTION When using a match to light the grill make sure to use the attached lighting rod.
CAUTION Remove the warming rack when using a match to light the rotisserie burner.

Main Burner

1. If you have already attempted to light the main burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.

2. Insert a match into the lighting rod as shown in Fig. 24.
   Ignite the match and insert it through the cooking grids to the burner.

3. If the burner does not light within seconds turn the knob to the “OFF” position, wait 5 minutes and try again.

Side Burner

1. If you have already attempted to light the side burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod as shown in Fig. 24. Ignite the match and hold it next to the burner.
3. Push and turn the Side Burner knob slowly to IGNITE/HIGH. The burner should light immediately.
4. If the burner does not light within 5 seconds turn the knob off, wait 5 minutes and try again.

CARE AND MAINTENANCE

Stainless Steel

• There are many stainless steel cleaners available. Always use the mildest cleaning process first, scrubbing in the direction of the grain. Do not use steel wool as it will scratch the surface. To touch up noticeable scratches in the stainless steel, sand very lightly with dry 100-grit sandpaper in the direction of the grain.
• Grease specks can gather and bake onto the surfaces of the stainless steel, giving the appearance of rust.
• For removal, use an abrasive pad with a stainless steel cleaner.

Cooking Grates

• The easiest way to clean the grill is immediately after cooking is completed and the flames have been turned off.
• Wear a barbeque mitt to protect your hand from heat and steam.
• Scrub the hot cooking grates by dipping a bristled barbeque brush in tap water. Cleaning will be more difficult if the grill is allowed to cool.

Grease Pan

• The grease pan should be emptied, wiped down and washed after each use with a mild detergent and warm water solution. Check the grease pan frequently and do not allow excess grease to accumulate and flow out of the grease pan.

Grill Burners

• Extreme care should be taken when removing a burner. It must be correctly centred on the orifice before any attempt is made to relight the grill. The frequency of cleaning will depend on how often you use the grill.
• Failure to properly place the burner over the orifice could cause a fire to occur behind and beneath the valve panel, thereby damaging the grill and making it unsafe to operate.
• Before cleaning, make sure the gas supply and control knobs are in the “OFF” position and the burners have cooled.

To remove the main burners for cleaning:

1. Locate the burner screw at the rear of the firebox.
2. Remove the screw and lift the burner out of the firebox.

To clean the grill burners:

1. Clean the exterior of the burner with a wire brush.
   Use a metal scraper for stubborn stains or debris.

2. Clear clogged ports with a straightened paper clip.
   Never use a wooden toothpick as it may break off and clog the port.

3. Check and clean burners / venture tubes for insects and insect nests. A clogged tube can lead to a fire beneath and behind the main control panel.

To reinstall the main burners:

1. Insert the burner over the main burner gas valve.
2. Make sure the orifice stud (A) is inside the burner venture (B) as shown in Fig.25.
3. Align the burner screw hole with the firebox hole, insert the screw and tighten.

CAUTION

1. Keep outdoor cooking gas appliance area clear and free from combustible materials, gasoline and other flammable vapours and liquids.
2. Do not obstruct the flow of combustible and ventilation air.
3. Keep the ventilation opening(s) of the enclosure free and clear from debris.

Check for proper burner flame characteristics. Burner flames should be blue and stable with no yellow tips, Excessive noise, or lifting as shown in Fig. 26. The following steps should be followed to correct the flame characteristics:

1. Turn the control knobs and Liquid Propane Cylinder valves “OFF.”
2. Allow the grill and burners to cool.
3. If the flame is yellow (not enough air), turn the adjustment screw found at the front of the burner counterclockwise.
4. If the flame is noisy or lifts away from the burner (too much air), turn the adjustment screw clockwise.
5. If these adjustments do not correct the problem, contact customer service at 1-800-913-8999.

TROUBLESHOOTING

LIMITED WARRANTY

LIMITED WARRANTY (Model # 720-0825)

The manufacturer warrants to the original consumer-purchaser only that this product (Model #720-0825) shall be free from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated below beginning on the date of purchase. The manufacturer reserves the right to require photographic evidence of damage, or that defective parts be returned, postage and/or freight pre-paid by the consumer, for review and examination.

• TUBE BURNERS: 3-year LIMITED warranty against perforation.
• COOKING GRIDS and FLAME TAMERS: 1-year LIMITED warranty; does not cover dropping, chipping, scratching, or surface damage.
• STAINLESS STEEL PARTS: 1-year LIMITED warranty against perforation; does not cover cosmetic issues like surface corrosion, scratches and rust.
• ALL OTHER PARTS: 1-year LIMITED warranty (Includes, but not limited to, valves, frame, housing, cart, control panel, igniter, regulator, hoses) *Does not cover chipping, scratching, cracking surface corrosion, scratches or rust.

Upon the consumer supplying proof of purchase as provided herein, the Manufacturer will repair or replace the parts that are proven defective during the applicable warranty period. Parts required to complete such repair or replacement shall be free of charge to you except for shipping costs, as long as the purchaser is within the warranty period from the original date of purchase. The original consumer-purchaser will be responsible for all shipping charges of parts replaced under the terms of this limited warranty. This limited warranty is applicable in the United States and Canada only is only available to the original owner of the product and is not transferable. The manufacturer requires reasonable proof of your date of purchase. Therefore, you should retain your sales receipt and/or invoice. If the unit was received as a gift, please ask the gift-giver to send in the receipt on your behalf, to the below address. Defective or missing parts subject to this limited warranty will not be replaced without registration or proof of purchase. This limited warranty applies to the functionality of the product ONLY and does not cover cosmetic issues such as scratches, dents, corrosions or discolouring by heat, abrasive and chemical cleaners or any tools used in the assembly or installation of the appliance, surface rust, or the discolouration of stainless steel surfaces. Surface rust, corrosion, or powder paint chipping on metal parts that do not affect the structural integrity of the product is not considered a defect in workmanship or material and is not covered by this warranty. This limited warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage. If an original replacement part is not available, a comparable replacement part will be sent. You will be responsible for all shipping charges for parts replaced under the terms of this limited warranty.

MANUFACTURER WILL NOT PAY FOR

• Service calls to your home.
• Repairs when your product is used for other than normal, single-family household or residential use.
• Damage resulting from accident, alteration, misuse, lack of maintenance/cleaning, abuse, fire, flood, acts of God, improper installation, and installation not under electrical or plumbing codes or misuse of product…
• Any food loss due to product failures.
• Replacement parts or repair labour costs for units operated outside the United States or Canada.
• Pickup and delivery of your product.
• Postage fees or photo processing fees for photos sent in as documentation.
• Repairs to parts or systems resulting from unauthorized modifications made to the product.
• The removal and/or reinstallation of your product.
• Shipping cost, standard or expedited, for warranty/non-warranty and replacement parts.

DISCLAIMER OF IMPLIED WARRANTIES: LIMITATION OF REMEDIES
Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty. The manufacturer will not be responsible for any consequential or incidental damages arising from the breach of either this limited warranty or any applicable implied warranty or for failure or damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration, replacement of parts by anyone other than manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering), improper installation or installation not under local codes or printed manufacturer instructions.
THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO PRODUCT PERFORMANCE SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY THE MANUFACTURER EXCEPT TO THE EXTENT OUTLINED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY STATE, INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Neither dealers nor the retail establishment selling this product has any authority to make any additional warranties or to promise remedies in addition to or inconsistent with those stated above. The manufacturer’s maximum liability, in any event, shall not exceed the documented purchase price of the product paid by the original consumer. purchase from an authorized retailer and or re-seller NOTE. Some
This warranty only applies to units purchased from an authorized retailer and or re-seller. NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or exclusions may not apply to you; this limited warranty gives you specific legal rights as set for herein. You may also have other rights which vary from state to state.

CONTACT

• If you wish to obtain the performance of any obligation under this limited warranty, you should write to:
• Nexgrill Customer Relations
• 5270 Edison Avenue.,
• Chino, CA 91710
• All consumer returns, parts orders, general questions, and troubleshooting assistance can be acquired by calling 1-800-913-8999.

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Nexgrill Grill Parts - Select From 922 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>