SEALEY TSTPG10.V2 Digital Tyre Pressure Gauge Instruction Manual

SEALEY TSTPG10.V2 Digital Tyre Pressure Gauge

Specifications

• Model No: TSTPG10.V2
• Battery: Not specified
• Operating Temperature: Not specified
• Pressure Units: Not specified
• Range: Not specified
• Resolution: Not specified

Product Usage Instructions

Safety

WARNING
Check your tire pressures regularly. An under or over-inflated tire can add to your fuel consumption and cause additional wear. Both are dangerous.

DO NOT
use this product for applications outside of its intended use. Read and follow ALL instructions before use.

Introduction

Specification

MODEL NO

• TSTPG10.V2

Battery

• Not specified

Operating Temperature

• Not specified

Pressure Units

• Not specified

Range

• Not specified

Resolution

• Not specified

Operation

Battery

• [Include specific battery information here]

Environment Protection

• [Include information on recycling and disposal]

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

 SAFETY

WARNING

• Check your tire pressures regularly. An under or over-inflated tire can add to your fuel consumption and cause additional wear. Both are dangerous.
• DO NOT use this product for applications outside of its intended use.
• Read and follow ALL instructions before use.

INTRODUCTION
Ergonomically designed lightweight tire pressure gauge. One-button operation with LCD digital display and Illuminated nozzle. Read-out available in bar, psi, kg/cm², or kPa. Range: 0-150psi(0-  10.3bar). Auto-power-off feature. Compact, can easily be stored in a glove box. Powered by 1 x CR2032, 3 x LR44 batteries (supplied).

SPECIFICATION

3 x LR44 (supplied)

Operating Temperature:| -5°C to 50°C
Pressure Units:| Bar, psi, kg/cm², kPa
Range:| 0-10.3bar 0-150psi

0-10.5kg/cm²

0-1034kPa

Resolution:| 0.1psi

OPERATION

MEASURING TYRE PRESSURE (FIG.1)

• Press the ON/OFF button to turn the tire pressure gauge on. The gauge will display “0.0” on the LCD screen.
• Place the nozzle of the tire pressure gauge on the tire valve you wish to measure. Ensure a good seal to prevent air from escaping.
• Hold the gauge on the valve until the measurement display locks
• Remove the gauge to easily read the pressure reading.
• To change units press the button to change between the four available units (bar, PSI, kg/cm2, kPA)
• The tire pressure gauge will automatically turn off shortly after use. Alternatively, hold the ON/OFF button to turn off.

CHANGING THE BATTERY (FIG.2)

• Remove the back cover using a screwdriver.
• Remove the battery and replace it with an equivalent. Ensure the battery is placed with the correct polarity.
• Replace the back cover and screws.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd is required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

Note
It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team at technical@sealey.co.uk or 01284 757505.
Important
No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk

FAQ

Q: What should I do if the display shows an error message?
A: If the display shows an error message, please refer to the user manual for troubleshooting steps or contact customer support for assistance.

Q: Can I use this product for commercial vehicles?
A: This product is intended for use with standard passenger vehicles. Please do not use it for commercial vehicles as it may not provide accurate readings.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>