SOLIGHT WO8005 LED Lighting with Remote Control Iron Oak Instruction Manual
- July 4, 2024
- Solight
Table of Contents
SO LIGHT WO8005 LED Lighting with Remote Control Iron Oak
Specifications
- Voltage: EN WO8005 | WO8006
- Consumption: LED lighting with remote control Iron Oak
- Luminous flux: Variable depending on onsettings
- Chromaticity: 3000K – 6000K
- Coverage: Adjustable
- LED lifetime: Long-lasting
- Dimensions: Varies by model
- Operating temperature: Standard room temperature range
Installation
Switch off the power supply before installation!
- Insert the dowels into the pre-drilled holes.
- Remove the rear of the luminaire by turning it and threading the supply cable through the hole in the rear of the luminaire.
- Screw on the back of the luminaire.
- Connect the supply cable to the terminal block and make sure that the connection is correct.
- Rotate to attach the front of the luminaire to the rear.
- Switch on the power supply.
Remote Control
The remote control allows you to adjust various settings:
- On/Off
- Brightness control (+/-)
- Chromaticity control (+/-)
- Night lighting mode
- Brightness presets (20%/50%/100%)
- Chromaticity presets (3000K, 4000K, 6000K)
Note
The light source of this luminaire is non-replaceable. At the end of its
service life, replace and dispose of the entire luminaire in a designated
place. The manufacturer is not liable for any damage caused by improper use.
The product has a CE declaration of conformity. For more information, contact
the manufacturer at info@solight.cz or visit
www.solight.cz/en.
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Do not hang or cover the luminaire with anything. Keep the instruction manual carefully. Installation must only be carried out by qualified personnel.
TECHNICAL PARAMETERS
| W O 8005| W O 8006
---|---|---
Voltage| 220-240V AC| 220-240V AC
Consum option| 48W for 4000K, 24W for 3000K and 6000K| 60W for
4000K, 32W for 3000K and 6000K
Lum in flux| 3360lm for 4000K, 1700lm for 3000K and 6000K|
4200lm for 4000K, 2100lm for 3000K and 6000K
Chrom activity| 3000K, 4000K, 6000K| 3000K, 4000K, 6000K
Coverage| IP20| IP20
LED lifetime| 20.000 hours| 20.000 hours
Dim tensions| 400 x 80 mm| 510 x 80 mm
O operating temperature| -20°C to 50°C| -20°C to 50°C
INSTALLATION
Switch off the power supply before installation
- Insert the dowels into the pre-drilled holes.
- Remove the rear of the luminaire by turning it and thread the supply cable through the hole in the rear of the luminaire.
- Screw on the back of the luminaire.
- Connect the supply cable to the terminal block and make sure that the connection is correct.
- Rotate to attach the front of the luminaire to the rear.
- Switch on the power supply.
REMOTE CONTROL
****The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source. The manufacturer is not liable for any damage caused by improper use. The product has been issued with a CE declaration of conformity in accordance with the applicable regulations. On request from the manufacturer:info@solight.cz, or downloadable from www.solight.cz/en.
FAQ
Q: Can I replace the light source in this luminaire
A: No, the light source is non-replaceable. The entire luminaire must be
replaced at the end of its service life.
Q: What should I do if I encounter issues with the product?
A: Contact the manufacturer at info@solight.cz for
assistance with any product-related issues.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>