MechaTronix Osram Opto Semiconductors Modular Passive Star LED Cooler Instructions
- June 3, 2024
- MechaTronix
Table of Contents
Opto Semiconductors Modular Passive Star LED Cooler
Instructions
Modular Passive Star LED Cooler
ø99 x H50 / 80 (mm)
Rth 1.34 – 1.02 °C/W
Power Pd 37.3 – 48.9 W
MORE PRODUCT DETALS
Mounting Instruction
OSRAM Opto semicondutorS
LIGHT for you power by OSRAM
Osram Opto Semiconductors provide different high power LED including
OSCONIQ®, DURIS® & OSLON® family. The 38x38mm LED engines consist of high
power mitters from Osram Opto Semiconductors. Color temperatures from 2.700K
to 6.500K. The engines produce from 6.000lm up to 18.000lm depend on the
choosen driving current.
Mounting indicator marks overview
MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase hange thermal pad thickness 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be preappliedfrom MechaTronix.
Mounting options
MCPCB designed with Osram Opto high power OSCONIQ®, DURIS® & OSLON® LED up to
Pe 55W could fit on this LED cooler with several mounting options, like:
– 2x M3 holes at 32.24mm (Blue indicator marks)
– 2x M3 holes at 35mm (Green indicator marks)
– 2x M3 holes at 45.25mm (Red indicator marks)
For complete mounting options, please check product drawing & dimensions. To
verify your LED compatibility, please contact MechaTronix.
Below a perfect combination with Cezos PCB.
Cezos Osram PCB’s
With 60 of high power Osram OSLON® – CSSRM2 LED on a high end carrier MCPCB
comes in a wide variety of CCT colors, flexible driving current up to 1.400mA.
Model names
Q0-038038-xxx-C3600-P024
Mounting
- Direct mounting with 2 self tapping screws M3 x 8mm Red indicator marks
No.818, Dashun 2nd Rd., Sanmin Dist.,
Kaohsiung City 80787, Taiwan
[email protected]
www.led-heatsink.com
www.mechatronix-asia.com
Tel: +886-7-381-5892
Fax: +886-7-383-9293
VAT: 28600841