MechaTronix SQ-01 2X2MX CoolBlock Luminus Square Pin Fin LED Cooler Instruction Manual
- June 4, 2024
- MechaTronix
Table of Contents
MechaTronix SQ-01 2X2MX CoolBlock Luminus Square Pin Fin LED Cooler
Mounting Instructions
The 2x2MX LED engines consist of 4 high-power emitters placed on a square board of 73x73mm. Typically these engines produce between 3000lm and 6000lm, depending on the chosen driving current. The lifespan for these high-power engines is the perfect thermal conductivity of the carrier board.
Mounting indicator marks overview
MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase change thermal pad thickness 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be applied from MechaTronix.
Luminus Gen 4 LED COB + Bender Wirth 2x2MX holder
- While the 2x2MX platform was originally foreseen for 4 high power emitters, this case proves that thinking out-of-the-box works…
- Together with Bender+Wirth, we developed these high-end LED holders, enabling COB LED modules to be placed in the 2x2MX platform.
- These Mica holders not only deliver a mechanical and electrical platform for the 4 COBs but also brings a direct thermal advantage.
- While other high-power emitters have to be placed on a carrier board, which leads to extra thermal resistance and additional heating, this system makes that the COBs sit directly on the LED cooler, reducing the resistance heat.
- In this way, the CoolBlock® SQ-01 2x2MX can be used up to 6000 lumens in an industrial environment, what is probably the most compact engine on the market.
Model names
- CXM-3 (Pico-COB)
- CXM-4 (Pico-COB)
- CXM-6
- CIM-9
- CLM-9
- CXM-9 (AC)
Mounting
- With CoolConnect® holder 2x2MX-02 ( Co-development LED holder with Bender+Wirth ) Mounting with 4 screws M3 x 4mm Red indicator marks
Luminus Gen 3 LED COB + Bender Wirth 2x2MX holder
- While the 2x2MX platform was originally foreseen for 4 high power emitters, this case proves that thinking out-of-the-box works…
- Together with Bender+Wirth, we developed these high-end LED holders, enabling COB LED modules to be placed in the 2x2MX platform.
- These Mica holders not only deliver a mechanical and electrical platform for the 4 COBs but also brings a direct thermal advantage.
- While other high-power emitters have to be placed on a carrier board, which leads to extra thermal resistance and additional heating, this system makes the COBs sit directly on the LED cooler, reducing the resistance heat.
- In this way, the CoolBlock® SQ-01 2x2MX can be used up to 6000 lumens in an industrial environment, which is probably the most compact engine in the market.
Model names
- CXM-6 (AC)
- CIM-9 (AC)
- CLM-9 (AC)
- CXM-9 (AC
Mounting
- With CoolConnect® holder 2x2MX-02 ( Co-development LED holder with Bender+Wirth ) Mounting with 4 screws M3 x 4mm Red indicator marks
No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
- sales@mechatronix-asia.com
- www.led-heatsink.com
- www.mechatronix-asia.com
- Tel: +886-7-381-5892
- Fax: +886-7-383-9293
- VAT: 28600841
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>