MechaTronix 13450-B Osram Opto Semiconductors Modular Passive Star LED Cooler Instruction Manual
- June 3, 2024
- MechaTronix
Table of Contents
MechaTronix 13450-B Osram Opto Semiconductors Modular Passive Star LED
Cooler
Mounting Instruction
Osram Opto Semiconductors provide different high power LED including OSCONIQ®, DURIS® & OSLON® family. The 38x38mm LED engines consist of high power emitters from Osram Opto Semiconductors. Color temperatures from 2.700K to 6.500K. The engines produce from 6.000lm up to 18.000lm depend on the choosen driving current.
Mounting indicator marks overview
MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad, or a phase change thermal pad thickness 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be applied from MechaTronix.
Mounting options
MCPCB designed with Osram Opto high power OSCONIQ®, DURIS® & OSLON® LED up to Pe 110W could fit on the LED cooler with several mounting options, like:
- 2x M3 holes at 32.24mm (Blue indicator marks)
- 2x M3 holes at 35mm (Green indicator marks)
- 2x M3 holes at 45.25mm (Red indicator marks)
For complete mounting options, please check product drawing & dimensions. To verify your LED compatibility, please contact MechaTronix. Below a perfect combination with Cezos PCB.
Cezos Osram PCB’s
With 60 of high power Osram OSLON® – CSSRM2 LED on a high-end carrier MCPCB comes in a wide variety of CCT colors, flexible driving current up to 1.400mA.
Model names
- Q0-038038-xxx-C3600-P024
Mounting
- Direct mounting with 2 self-tapping screws M3 x 8mm Red indicator marks
CONTACTS
- No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
- sales@mechatronix-asia.com
- www.led-heatsink.com
- www.mechatronix-asia.com
- Tel: +886-7-381-5892
- Fax: +886-7-383-9293
- VAT: 28600841