MechaTronix CXM-22 CoolBay Giga-A Luminus Advanced High Bay LED Cooler User Manual

June 4, 2024
MechaTronix

MechaTronix CXM 22 CoolBay Giga A Luminus Advanced High Bay LED Cooler -
logo 2
CXM-22 CoolBay Giga-A
Luminus Advanced High Bay LED Cooler
**User Manual

**

CXM-22 CoolBay Giga-A Luminus Advanced High Bay LED Cooler

CoolBay® Giga
ø152 x H200 (mm)
Rth 0.34 °C/W
Power Pd 150 W
MORE PRODUCT DETAILS
www.mechatronix-asia.com
MASTERING LED COOLING
MechaTronix CXM 22 CoolBay Giga A Luminus Advanced High Bay LED Cooler -
Figure 5 CoolBay® Giga-A Luminus Advanced High Bay LED Cooler ø152mm

Mounting Options

The CoolBay® Giga-A comes with mounting patterns for the broadly used 28x28mm COB and 38x38mm COB sizes, as well as with the Zhaga Book 3 mounting holes to accommodate a wide range of LED holders for various brands. The wetting (contact between the LED engine and the LED cooler) is the lifespan for these high-power LEDs, so we suggest you measure besides the Tc point also a place on the LED cooler near the contact area – when a temperature difference is observed than 10°C between these 2 points there is a potential contact issue.

Mounting indicator marks overview

MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad, or a phase change thermal pad thickness of 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be pre-applied from MechaTronix.

| Luminus Gen 4 COB Array
---|---
Model names| Mounting
• CXM-22| • With Zhaga Book 3 LED holder
BJB spotlight connector 47.319.2033
Bender+Wirth 631a
Mounting with 4 screws M3 x 6mm
Green indicator marks
• CGM-22|
| Luminus Gen 4 COB Array
Model names| Mounting
• CXM-32| • Direct mounting with 2 screws M3 x 4mm
Red indicator marks
| • With LED holder
BJB spotlight connector 47.319.4160
Mounting with 4 screws M3 x 6mm
Blue indicator marks
| Luminus Gen 3 COB Array
Model names| Mounting
• CXM-32 (AC)| • Direct mounting with 2 screws M3 x 4mm
Red indicator marks
| • With LED holder
BJB spotlight connector 47.319.4160
Mounting with 4 screws M3 x 6mm
Blue indicator marks

No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
sales@mechatronix-asia.com
www.led-heatsink.com
www.mechatronix-asia.com
Tel: +886-7-381-5892
Fax: +886-7-383-9293
VAT: 28600841

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals