MechaTronix LPF8668-ZHC Luminus Pin Fin LED Cooler Instruction Manual

MechaTronix LPF8668-ZHC Luminus Pin Fin LED Cooler

Patented, high-performance Luminus LEDs are the brightest and most versatile solid state light sources available today, redefining the solid state lighting landscape by enabling the adoption of LED technology into emerging markets. Luminus technology is used in commercial and industrial lighting fixtures, theatrical lighting, projectors, signs, medical equipment, UV curing… just about anywhere a bright, efficient, reliable, long-life light source is needed

Mounting indicator marks overview

MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase change thermal pad thickness of 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be preapplied from MechaTronix.

Luminus Gen 4 COB Array

Model names

• CLM-9
• CXM-9 (AC)

Mounting

• With Zhaga Book 3 LED holder Bender+Wirth 634a
• Mounting with 2 screws M3 x 6mm Green indicator marks

Model names

• CIM-14
• CLM-14
• CXM-14 (AC)
• CGM-14

Mounting

• Direct mounting with 2 screws M3 x 6mm Red indicator marks
• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2021 Bender+Wirth 633a TE Connectivity Lumawise type Z50 2213254 Mounting with 2 screws M3 x 6mm Green indicator marks

Model names

• CXM-18

Mounting

• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2281 Mounting with 2 screws M3 x 6mm Green indicator marks

Mounting Instruction

Model names

• CIM-22
• CLM-22

Mounting

• Direct mounting with 2 screws M3 x 6mm Blue indicator marks
• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2033 Bender+Wirth 631a Mounting with 2 screws M3 x 6mm Green indicator mark

Luminus Gen 3 COB Array

Model names

• CXM-11 (AC)
• CIM-14 (AC)
• CLM-14 (AC)
• CXM-14 (AC)

Mounting

• Direct mounting with 2 screws M3 x 6mm Red indicator marks
• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2021 Bender+Wirth 633a TE Connectivity Lumawise type Z50 2213254 Mounting with 2 screws M3 x 6mm Green indicator marks.

Model names

• CXM-18 (AA)

Mounting

• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2281 Mounting with 2 screws M3 x 6mm Green indicator marks

Model names

• CLM-22 (AC)

Mounting

• Direct mounting with 2 screws M3 x 6mm Blue indicator marks
• With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2033 Bender+Wirth 631a Mounting with 2 screws M3 x 6mm Green indicator marks

Luminus Dynamic COB Warm Dimming Modules

Model names

• CDM-14
• CDM-18

Mounting

• With Zhaga Book 3 LED holder BJB spotlight connector 47.360.5090 Bender+Wirth 491 Typ L8 Mounting with 2 screws M3 x 6mm Green indicator marks

Luminus Dynamic COB Two Channel CCT Tunable Modules

Model names

• CTM-22

Mounting

• With Zhaga Book 3 LED holder Bender+Wirth 494 Typ Z1 Mounting with 2 screws M3 x 6mm Green indicator marks

CONTACTS

• ADDRESS: No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
• sales@mechatronix-asia.com
• www.led-heatsink.com
• www.mechatronix-asia.com
• Tel: +886-7-381-5892
• Fax: +886-7-383-9293 VAT: 28600841

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>