MechaTronix IceLED Ultra VS Luminus Modular Active Star LED Cooler Instruction Manual
- June 4, 2024
- MechaTronix
Table of Contents
MechaTronix IceLED Ultra VS Luminus Modular Active Star LED Cooler
Instruction Manual
Mounting Instruction
Patented, high performance Luminus LEDs are the brightest and most versatile solid state light sources available today, redefining the solid state lighting landscape by enabling the adoption of LED technology into emerging markets. Luminus technology is used in commercial and industrial lighting fixtures, theatrical lighting, projectors, signs, medical equipment, UV curing just about anywhere a bright, efficient, reliable, long-life light source is needed.
Mounting indicator marks overview
MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase change thermal pad thickness 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be preapplied from MechaTronix.
Luminus Gen 4 COB arrays
Model names
- CXM-22
- CGM-22
Mounting
- With Zhaga Book 3 LED holder BJB spotlight connector 47.319.2033 Bender+Wirth 631a Mounting with 2 self tapping screws M3 x 6mm Green indicator marks
CUSTOMER SUPPORT
No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
sales@mechatronix-asia.com
www.led-heatsink.com
www.mechatronix-asia.com
Tel: +886-7-381-5892
Fax: +886-7-383-9293
VAT: 28600841