Wodaue 43382828 5PK Self Adhesive Wall Panel Instruction Manual
- July 4, 2024
- Wodaue
Table of Contents
Wodaue 43382828 5PK Self Adhesive Wall Panel
Product Information
Recommended Surfaces:
- These surfaces will provide good quality results:
- Smooth ceramic tiles
- Smooth glass tiles
- Wall panel (acrylic)
- Mirrors
- Smooth painted gypsum
- Stainless metal
- Laminate
Non-Recommended Surfaces:
- These surfaces will not be suitable for use:
- Brick wall (not sufficiently flat)
- Stone wall (not sufficiently flat)
- Unfinished wall such as gypsum or plaster (this requires primer paint first)
- Stucco wall (not sufficiently flat)
- Unpainted plywood (paint with primer before installing panels)
- Shower wall
- Oily wall
Before you start
- It is recommended that you test the suitability of your surface by testing in an inconspicuous location & check after 7 days
- Patch any damaged areas of the surface
- Prepare your surface by ensuring it is smooth, clean & dust-free. Allow recently painted or primed walls to cure for 30 days prior to applying panels to avoid bubbling
- Gather required tools: Sharp utility knife, ruler, squeegee (not included)
- It is recommended that installation be completed by at least 2 people
Specifications:
- Product Name: 5PK Self-Adhesive Wall Panel
- Recommended Surfaces: Smooth ceramic tiles, smooth glass tiles, wall panel (acrylic), mirrors, smooth painted gypsum, stainless metal, laminate
- Non-Recommended Surfaces: Brick wall (not sufficiently flat), stone wall (not sufficiently flat), unfinished wall such as gypsum or plaster (requires primer paint first), stucco wall (not sufficiently flat), unpainted plywood (paint with primer before installing panels), shower wall, oily wall
- Installation: Clean and prepare the surface, remove backing sticker to expose adhesive, press panels firmly and evenly to the wall
- Caution : Test in an inconspicuous location and check after 7 days for surface suitability. Product not designed to be removable.
Product Usage Instructions
- Clean and Prepare Surface: Ensure the surface is clean and dry. Follow the recommended surfaces listed above for best results.
- Remove Backing Sticker: Peel off the backing sticker to reveal the adhesive side of the panel.
- Apply Panels: Press the panels firmly and evenly onto the wall. Smooth out the panels to prevent any air bubbles from forming.
Warning:
Test the product in an inconspicuous area before full application. Check after
7 days for any issues with surface adhesion. Note that the product may not be
completely intact in all circumstances and may not be removable without
causing damage.
Installation:
- Clean and prepare the surface as described above
- Remove the backing sticker to expose the adhesive
- Press the panels to the wall firmly and evenly, smooth out to prevent any air bubbles
Ongoing Care & Cleaning:
Wipe down with a damp cloth. Avoid using any chemical cleaners. If using any
cleaner other than water, test in an inconspicuous area first
Lifespan:
These panels are not designed to be removable. Damage may occur during if they
are removed after they have been applied.
WARNING: TEST IN AN INCONSPICUOUS LOCATION AND CHECK AFTER 7 DAYS FOR SUITABILTY OF SURFACE. WHILE THIS PANEL HAS BEEN TESTED ON THE RECOMMENDED SURFACES IN VARYING CONDITIONS, WE CANNOT GUARAN- TEE THAT UNDER ALL CIRCUMSTANCES THE MATERIAL WILL STAY COMPLETELY INTACT AND THAT THE PRODUCT WILL PROPERLY ADHERE TO THE SURFACE.THIS PRODUCT IS NOT DESIGNED TO BE REMOVABLE. DAMAGE MAY OCCUR IF THIS PRODUCT IS REMOVED AFTER APPLICATION.
FAQ
Q: Can I install the panels on a brick wall?
A: No, brick walls are not sufficiently flat for proper adhesion. It is
recommended to use smooth surfaces as listed in the manual.
Q: Is it necessary to use primer on unfinished walls before installing the
panels?
A: Yes, it is advised to apply primer on unfinished surfaces like gypsum or
plaster prior to installing the panels for better adhesion.
Q: Can the panels be removed without causing damage?
A: The product is not designed to be removable. Removing the panels after
application may cause damage to the surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>