Patpet F200C Wireless Electronic Pet Fence System User Manual

: July 4, 2024
: PATPET

Table of Contents

Patpet F200C Wireless Electronic Pet Fence System
Product Usage Instructions
Package Include
Accessories
Specification

Patpet F200C Wireless Electronic Pet Fence System

Product Specifications:

Wireless pet fence system
Center of the transmitter, straight line radius of 300 meters
Waterproof & rechargeable receiver collar
Reflective strap fluorescent TPU for safety at night
No need for code pairing between transmitter and receiver
Supports multiple receivers with one transmitter

Product Usage Instructions

Working Principle:
The receiver activates when the wireless signal exceeds the set range. It deactivates when within the safe distance.

Working Mode:
The transmitter display indicates the distance. Sound and shock modes activate if the pet exceeds the set range. The device enters standby mode after 5 minutes of inactivity.

Main Characteristics:

LED display for distance
Signal range of over 300 meters
Automatic alarm and static shock if pet exceeds range
5 different transmitter signals for various distances
Waterproof, rechargeable, and reflective for night safety

Transmitter Operation:

Power On/Off: Press ON/OFF button to turn on or off the transmitter.
Setting Remote Control Range: Adjust distance using + or – buttons with corresponding LED numbers.

Attention:
Wireless distance may vary due to electromagnetic interference or obstacles. Ensure the transmitter has sufficient battery power for optimal functionality.

Package Include

Accessories

Wireless Transmitter – 1
Screws – 2
Waterproof & Rechargeable Receiver Collar – 1
Metal Probes – 4
Reflective Strap Fluorescent TPU – 1
Silicone Case – 4
Test Light Tool – 1 5V Charger – 1
USB Cable – 1 English Manual – 1

Specification

Wireless pet fence is reliable and safety for protecting pet running about. it avoid Wire troublesome and easily to set the safety area of pet activity, center of transmitter ,straight line radius 300meters, during this space, your dog can act safety , this device can be used the training of pet inside or outside.

Working principle

The receiver will work when the wireless transmits signal beyond the setting range , receiver will not work during setting safe distance.

Working Mode: Transmitter display 30 means that the receiver will not work during 30-meter straight line distance without barrier, receiver will work when the transmitter out of the setting range as below:

sound 5 seconds→ shock 5 seconds sound → shock work at same time for 6 seconds, indicator light flashing when working.
sound 5 seconds → shock 5 seconds sound → shock work at same time for 6 seconds, indicator light flashing when working.

After 2 cycles of working modes, will have a di-di-di sound, emitted until the return to the setting distance range, receiver will not work. After 5 minutes of static, it will enter standby mode.

Main Characteristic

LED display distance，can be used outside；
round signal range of transmitter center can control more than 300 meters.
if dog exceed the setting range, the alarm sound and static shock mode will be started automatically.
5 different of transmitter signals means different using distance.
no need to pair code for transmitter and receiver, device can accept signal to work after turning on；
one transmitter can support several receivers ；
waterproof and rechargeable；
reflective strip fluorescence TPU，improve the safety at night
double-end cable can charge for both transmitter and receiver.

Transmitter Operation

Turn on or turn off power
Press ON / OFF button ，open power transmitter , LED power indicator light will Be in red and signal distance will displayed on screen. Press ON/OFF button will be Turned off .
Setting remote control range
Remote control range means the straight line distance between transmitter and receiver, the more of the transmitter signal value, the farther of signal range, the max remote control range can be 300meters ( LED number means meters, 30 meters~98ft ),press “+”or “ – ”button on transmitter, distance can be increased from 30 meter or reduced.

Numbers on transmitter = remote control distance

30=30 meters~98ft
60=60 meters~196ft
90=90 meters~295ft
150=150 meters~492ft
300=300 meters~1000ft

Attention: Wireless distance means the straight line distance in opened space, it will be affected by electromagnetic wave or barriers surrounding.

The transmitter need 3.7v lithium battery, 2500ma for power supply: voltage lower 3 volt ,led display 000,please charge in time, red indicator light will flash when charging, after full charged,the indicator light will be in red on.

Receiver : lithium battery 3.7V voltage，400mAh

1. Put the accessories on receiver, put 2 touch probes on receive screw. there are 2 kind of probes, short probes suit for small dog, long probes suit for middle and big dogs) then make the TPU belt through the back of receiver and 2 holes.
2. turn on/ turn off receiver power, press ON / OFF button, turn on the receiver, will hear short sound “di”，red LED will light on. If the transmitter turned off, receiver will have sound “di…di”， turn on transmitter ,the red light of receiver will light on and under stand by status.
Receiver charging：
When Receiver voltage lower by 3volts,power indicator light in red and flashing which Means receiver in low power and please charge in time, it will take 2-3 hours for full
Charge and after full charged, indicator light will be in green
attention：please charge at least 3 hours for first charge
4.receiver is with waterproof function, so it can be used for raining day, dog collar with TPU reflective light material can be use at night and easily to find pet.

REMINDING: Receiver will enter into sleep and power saving mode, when act it will be awakened automatically.

USING PRODUCT

Put the receiver on dog neck not so tight
Connect power, press the ON/OFF button on the transmitter: use + / – button，setting transmit distance, your setting number will be displayed on screen.
Attention : Wireless distance means the straight line distance in opened space, it will be affected by electromagnetic wave or barriers surrounding.
please put transmitter on the place more than 15 meters above the ground without wall or barriers, so that can operate the device among the best distance range.

Important Note:

wireless electric pet fence only suit for pet fence
Low power will affect distance, please charge on time.
Please do not put the receiver on dog more than 10 hours each day, the pet will not adapted at the beginning, but will adapt after several times.
please put the receiver far from children to avoid hurting.
Please read the user manual carefully before using device.

Transmitter : 3.7V 2500mAh LiP
Receiver : 3.7V 400mAh LiP

The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.electric-collars.com Changes to technical parameters, properties and printing errors reserved.

Service center and distribution