TELTONIKA TAT100 Asset Tracker With Ip68 Casinga and Extended Battery Life Owner’s Manual
- July 3, 2024
- teltonika
Table of Contents
TELTONIKA TAT100 Asset Tracker With Ip68 Casinga and Extended Battery
Life
Product Information
Specifications
- Model: TAT100
- Description: Asset tracker with IP68 casing and extended battery life
- Robustness: Robust, small, and easy to install
- Ingress Protection: IP68 water and dust-resistant for outdoor integrations
- GNSS Technology: GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS
- Cellular Bands: GSM B2/B3/B5/B8
- Data Transfer: Max. 85.6 Kbps (DL/UL) GSM (GPRS)
- Battery: Li-SOCl2 non-rechargeable batteries (2200mAh, 2S or 3S)
- Dimensions: 78 x 63 x 28 mm (L x W x H)
- Weight: 119g (with 2 cells battery) or 138g (with 3 cells battery)
- Operating Environment: -5% to 95% non-condensing humidity, IP68 Ingress Protection Rating
- Certifications: CE/RED, E-Mark, EAC, UKCA, UA.TR, REACH
Product Usage Instructions
Installation
- Ensure the device is powered off before installation.
- Choose a suitable location with good GPS and GSM signal reception.
- Mount the device securely using appropriate fixtures.
Powering On/Off
To power on the device, press and hold the power button for a few seconds. To power off, repeat the same process.
Data Tracking
The device provides real-time tracking of valuable assets such as trailers, construction equipment, vehicles, and tools.
Battery Management
Monitor the battery levels regularly and replace with new batteries when needed. Do not attempt to recharge non-rechargeable batteries.
Frequently Asked Questions (FAQ)
-
Q: Can the device be used in extreme weather conditions?
A: Yes, the device is IP68 rated for water and dust resistance, making it suitable for outdoor use in various weather conditions. -
Q: How often should I replace the batteries?
A: The battery life depends on usage, but it is recommended to monitor battery levels regularly and replace them when necessary. -
Q: How can I update the device firmware?
A: Firmware updates can be done conveniently over-the-air using user-friendly applications or via USB using Teltonika Configurator.
TAT100 is an advanced tracking solution with a 2G (GSM) compatibility. Equipped with a robust, practical, and water-resistant (IP68) enclosure and different mounting accessories, the tracker is extremely easy to install and use. As it is developed on a low-power Bluetooth® chipset, long battery life provides endless possibilities in various use cases. With the features in hand, one can monitor non-powered assets, such as: construction equipment, tools, wire reels, elevators, and many more. On top of that, TAT100 serves as a backup vehicle tracker, or even as a stand-alone wireless tracker
DIMENSION
SPECIFICATION
*Optional modes available with custom firmware applications, for more information contact your sales manager.
FEATURES
ROBUST
Robust, small, and easy to install
INGRESS PROTECTION
Water and dust-resistant for outdoor integrations (IP68)
PERIODIC REPORTS AND WEEKLY SCHEDULER
Track on stop & in motion
OTA UPDATES
Convenient OTA (over-the-air) updating through user-friendly applications
Copyright © 2024, Teltonika. Specifications and information given in this document are subject to change by Teltonika without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>