Southwire 71X5SW520 X-Uplight LED String Lights Instruction Manual
- July 3, 2024
- Southwire
Table of Contents
Southwire 71X5SW520 X-Uplight LED String Lights
Introduction
X-Uplight LED String Lights
Please read and follow the instructions carefully before trying to install the fixture. Please retain this instruction sheet for future reference.
PRODUCT INPUT RATING
- 71X5SW 100′ 120Vac, 1.6A, 60Hz
- 71X4SW 50′ 120Vac, 0.8A, 60Hz
- 71X5SW520 100′ 120Vac, 1.6A, 60Hz
- 71X4SW520 50′ 120Vac, 0.8A, 60Hz
CAUTION
- Turn OFF power supply before installing or servicing this fixture.
- Electrical connections need to comply with both National Electrical Code and local electrical codes.
- Use only approved connectors to make electrical connections.
- String lights assembled with twist lock plugs and connectors are approved for use in damp location.
INSTALLATION INSTRUCTIONS
-
To install, carefully lift entire unit from the packaging.
-
The fixture must be installed in accordance with state, local, and national codes.
-
Southwire recommends using the provided hangers for mounting;
however, the cable can be used for support as long as it carries the weight of the string light assembly only. -
Connect a maximum of 500′ of Strings Lights together.
-
Turn ON the power supply.
-
String lights assembled with twist lock plugs and connectors are approved for use in damp location
FCC DIGITAL EMISSIONS COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the radio or television receiving antenna.
- Increase the separation between the computer equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
- Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance CAN ICES-5B/NMB-5B
One (1) Year Limited Product Warranty
This limited warranty is provided only to the original purchaser of lighting fixtures sold under the Southwire® brand name and should be retained for your records. By using this lighting fixture, you as the original purchaser are asked to carefully read and agree to the following terms and conditions of this Limited Product Warranty (“Limited Warranty”) before you use the product. Your use of this product constitutes agreement with all provisions of this warranty. Purchasing this lighting fixture from a third-party vendor negates all warranties (expressed or implied) in this warranty.
Southwire Company, LLC warrants to the original purchaser that the lighting
fixture will be free from manufacturer defects in material, assembly, and
workmanship under normal use for a period of three years from the date of
original purchase subject to the terms and conditions of this Limited
Warranty.
If any defects due to manufacturing should arise during the first year of
purchase and all terms and conditions of the Limited Warranty have the product
to the original purchaser without charge. If the product cannot be repaired
within a reasonable time or a reasonable price, Southwire Company, LLC may
elect to refund the purchase price instead.
No warranty work will be provided without the purchaser’s receipt or other
proof of the date of original purchase acceptable to Southwire Company, LLC.
This shall be Southwire Company, LLC’s maximum and total liability.
All return shipping charges shall be paid by the purchaser. The purchaser may have other rights which vary from state to state or province to province. The warranty does not apply to the following terms/conditions:
-
War, theft, vandalism, or an act of God such as fire, floods, rain, wind, or earthquake
-
Damage to the lighting fixture caused by accident, misuse, or abuse in handling
-
Damages exceeding the total cost of the lighting fixture
-
Sealed lamps and/or bulbs, LEDs, and batteries
-
The finish on any portion of the lighting fixture (i.e. surface scratches, weathering, corrosion, as this is considered normal wear and tear)
-
Transit damage, initial installation costs, removal costs, or reinstallation costs
-
Alteration, opening, tampering or modification of the lighting fixture
-
Improper maintenance, installation and/or operation of the lighting fixture in other than a normal operating condition or in such a way as to otherwise fail to comply with the instructions or manuals thereof or otherwise constitute misus
-
Preventing or refusing to allow Southwire Company, LLC to promptly inspect the damaged or defective lighting fixture Southwire Company,
LLC does not incur liability for any of the following in any event: -
Personal injury
-
Direct, indirect, special, incidental, multiple or consequential damages
To begin the claims processing procedure, please contact Customer Service Department at 855-SWTOOLS (855-798-6657).
CLAIMS PROCEDURE
-
Contact Consumer Services to return the lighting fixture. Before calling,
please be prepared to provide the following information:
a ) The part/model # of the lighting fixture
b ) Date and retailer where you purchased the lighting fixture -
Once the Consumer Services representative advises that you may return the product, you will need to ensure the following steps are adhered to:
a ) Each claim must be filed within 15 days of the date of the occurrence.
b ) A copy of the original sale receipts for the lighting fixture must accompany the return.
c ) Provide the exact date and approximate time of the claimed failure along with a brief written description of how the damage occurred and reasonably describe any damage.
d ) Send the lighting fixture to the address below, freight prepaid.
Original purchaser assumes all shipping costs and assumes the risk of loss or damage occurring during shipping or handling of the lighting fixture.
RETURN PRODUCT TO:
Southwire Company, LLC,
Attention: Tool Warranty Return
840 Old Bremen Road
Carrollton, GA 30117 -
The returned lighting fixture will be tested by Southwire Company, LLC and the results of this test, together with the technical assessment(s) will be reviewed to determine whether the lighting fixture failed to perform properly. You have the right to obtain copies of all reports at your expense.
NOTE
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
CUSTOMER SUPPORT
Contents Made in China
3/24
71X5SW, 71X4SW, 71X5SW520, 71X4SW520
manual/manuel
1-855-SWTOOLS — www.southwire.com