Southwire MEIBB Rebrand Bonding Bridge Instruction Manual
- June 4, 2024
- Southwire
Table of Contents
Southwire MEIBB Rebrand Bonding Bridge
INSTRUCTIONS FOR USE
- LOCKNUT Hand tighten + 1/4 tum
- BONDING CONDUCTORS Up to six (6) sizes #10-#14 AWG solid or stranded
- INSPECTION WINDOW Verify that end of the bonding conductor is visible in the inspection window
- GROUND SYMBOL Ensure the device is mounted with ground symbols facing forward
- MAIN GROUND CONDUCTOR Size #6-#4 AWG bare copper wire
- OPTIONAL Metallic or non-metallic tubing (not included)
- MOUNTING OPTIONS: Mounts to (but is not limited to) enclosures, conduit bodies, and inline with conduit.
- GANGABLE: Threaded on both ends.
CAUTION
All wiring must be according to NEC, state and local codes. This product
should only be installed and serviced by a qualified professional.
Distributed by/Distribute par
Southwire Company, LLC. Southwire Canada Company
One Southwire Drive 5705 Cancross Court
Carrollton, GA 30119 Mississauga ON LSR 3E9
Made in China
©2021 Southwire Company, LLC. All rights reserved./Tous droits reserves. 1-855-SWTOOLS TOLL-FREE TECHNICAL HELP Linea de Ayuda Tecnica Gratuita 7 /21 MEIBB manual/manuel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>