Alza SWPPD86-01OG In Wall Smart Socket User Manual

July 4, 2024
alza

Alza SWPPD86-01OG In Wall Smart Socket

Specifications

USB Type-C Power/WiFi Indicator PD 20W Smart Socket Remote Control
DC5V/3A, 9V/2A, 12V/1.5A DC5V/3A, 9V/2.22A, 12V/1.67A 5V/3.4A Max
Bluetooth 802.11 b/g/n Wi-Fi 2.4G

Product Introduction
The lighting fixture controlled by the Wi-Fi in-wall smart socket must not exceed 3000 watts. The smart socket is designed only for single-pole use and Neutral Wire required.

Indicator Description

  • Red light: The state of the smart socket is on.
  • Blue light: The smart socket is off.
  • Green light:
    1. Wi-Fi distribution network indicator.
    2. Remote control matching indicator light.

Method of Restoring Factory State
Press and hold the smart socket button for 10 seconds until the smart socket indicator is blinking.

Remote Pairing and Deletion Methods (UK)

One smart socket switch can be paired with four remotes at most.
One remote key can only control one smart socket.

User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Specifications

Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(2\)

Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(3\)

Product Introduction

The lighting fixture controlled by the Wi-Fi in-wall smart socket must not exceed 3000 watts. The smart socket is designed only for single-pole use and Neutral Wire required.

Indicator description

Red light: The state of the smart socket is on.
Blue light: The smart socket is off.
Green light:

  1. Wi-Fi distribution network indicator.
  2. Remote control matching indicator light.

Method of restoring factory state
Press and hold the smart socket button for 10 seconds until the smart socket indicator is blinking.

Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(7\)

Remote pairing and deletion methods (UK)
One smart socket seitch can be paired with four remotes at most. One remote key can only control one smart socket.

How to pair the remote with smart socket?
Step 1. Press and hold the smart socket button for 5 seconds until the socket indicator change to blinking slowly.
Step 2. Press and hold the remote key “A” or “B” until the smart socket indicator stop blinking, paired successfully. Alza-SWPPD86-01OG-In-Wall-
Smart-Socket- \(8\)

How to delete the remote with smart socket?
Press and hold the remote key for 10 seconds until the smart socket indicator flashes rapidly for 2 seconds, release your finger, then the paired key is invalid now. Alza-SWPPD86-01OG-In-Wall-Smart-Socket-
\(9\)

Smart Socket Installation

Tools you need

Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(10\)

Connect the Smart Socket wires Alza-SWPPD86-01OG-In-Wall-Smart-Socket-
\(11\)

IMPORTANT: Make sure the power is turned OFF before you proceed. Your existing wires may have different colours than those shown.

Install APP

Simplified steps to install the smart life App on your smart device and pair with Amazon Alexa and Google Assistant using smart life App on Apple Store or Google Play marketplace. Compatible with any smart phone or table including both Android and iOS systems.

Download Smart life App
Download smart socket from Apple Store or Google Play Store or scan the QR code below to install the smart life APP for either iOS or Android. Alza-
SWPPD86-01OG-In-Wall-Smart-Socket- \(12\)

  • Open smart life APP into account registration page, click on the “Register”.
  • At the registration page, select your region and enter the email to create a new account. [Phone number is not available].
  • After successful registration, you can add device on your APP now.

Add devices

  1. Step 1. After login to smart life APP, click on “+” to add devices. Select “Electrical” -> “Socket” category, tap “Socket (Wi-Fi)” product icon.
    Add New WiFi Device

  2. Connect your phone to the local WiFi.

  3. Press the switch button for 10 seconds till the light flashes to reset.

  4. Tap on “+” in the homepage of your “smart Life” App and select “Smart Socket”.

  5.  Enter Wi-Fi password and confirm.

  6. Wait until the configuration is complete.
    Add New Zigbee Device

  7. Ensure that the device is in fast flashing state.

  8. Open the Tuya ZigBee Smart Gateway.

  9. In the Zigbee smart gateway click to add a sub-device.
    Discover the device and add it, the addition is successful.

  10. Step 2. Select the Device Work Wi-Fi and enter the password, then start the configuration of the device. Follow the in-app instruction to connect the smart socket to your Wi-Fi network.

    • Please make sure the Wi-Fi is strong & 2.4 GHz wireless band.
    • Keep your mobile device close to the smart socket until setup is completed.
      Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(13\)
  11. Step 3. Active the smart socket to Wi-Fi connection mode smart life APP supports two types of configuration modes: EZ mode and AP mode.
    EZ mode: Turn off the luminaire first. The socket indicator will be blue. Press and hold the socket button for 10 seconds and release. The indicator light blink rapidly. (About twice per second).
    AP mode: Under EZ mode, continue to press and hold the socket button for 10 seconds and release, the socket indicator will blink slowly. (About once 2 seconds.)
    If the socket can not be paired in EZ mode (blink rapidly), please change to AP mode (blink
    slowly). After entering the “Add Device” page, confirm whether the Smart Socket is EZ mode. Alza-SWPPD86-01OG-In-Wall-Smart-Socket-
\(14\)

  12. Step 4. “Device added Successfully” will be displayed after a successful operation. Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(15\)

Rename the device
After the device be added successfully, click the device description text to modify device name. The name of the device is recommended to use easy pronunciation of the English words.

Control Your Smart Socket with Amazon Alexa/Google Assistant

  1. Tap the edit menu of the smart socket panel.
  2.  Tap the 3rd-party control icon to be operated.
  3. Sign in with your Amazon Alexa or Google Home account.

Alza-SWPPD86-01OG-In-Wall-Smart-Socket- \(19\)

Not wo can use your voice to control the light

  • Alexa, turn on Smart Socket.

  • Alexa, turn off Smart Socket
    Or

  • Hey Google, turn on Smart Socket Hey Google, turn off Smart Socket

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals