BOWER BWRWATG150 Top Grip Smartphone Tripod User Manual
- June 9, 2024
- BOWER
Table of Contents
BOWER BWRWATG150 Top Grip Smartphone Tripod
PRODUCT INTRODUCTION PARTS
- Top grip tripod
- Smartphone mount
- Cold shoe mount
INSTALLATION
FEATURES:
-
The Bower Top Grip Tripod fits most smart phones.
Actual fits will depend on smartphone and smartphone case.
The minimum clamping length of mobile phone holder is 2.2 inches and the maximum clamping length is 3.5 Inches. -
The mobile phone holder con be adjusted in o multitude of ogle ranges.
The tripod can be used in the horizontal or vertical mode without removing the mobile phone.
The most stable use is in the 45-degree or 90-degree position. -
The Bower Tripod is easy lo install on other devices by using¼ inch connection. so it con be installed on different types of tripods.
The tripod port is also equipped with¼ thread interface, so it can be connected to all kinds of small products with¼ inch thread mounting capabilities -
There is o cold shoe mount on the top of the mobile phone clip, which con be used to installable kinds of small equipment with cold shoe connectors.
This will allow one to expand the use of the tripod with other products. -
Tripod bracket legs can be extended to a 60-degree angle, making the tripod more stable.
The maximum working height of the product is 4.61 inches. -
The tripod is equipped with a round non-slip soft adhesive, which con improve the appearance and hand feel of the product.
-
Product size: 1.22 inches x 1.22 inches x 6 inches Solely:
The clomping port of mobile phone clip is mode of rubber pod, which hos good anti-sliding performance.
Please be careful with mounting smartphone into tripod.
Place tripod in safe area when using to avoid Tripod being accidentally knocked over and damaging 5morl phone.
SPECIFICATION
The Top Grip Smart phone Tripod holds your smart phone for viewing on o desk or tabletop for hands free viewing. It features o 360° swivel and tilt head which allows you to position your phone into the optimal horizontal or vertical viewing position and it tilts back, making your screen easier to see. The spring-loaded cradle fits devices from 2.2 to 3.5 inches and offers a low- profile standing height of 3.75 inches. Silicone feet help prevent slippage on flat surfaces. and the tripod legs. when folded. provide a grip for hand held video shooting. This lightweight and com po ct smartphone tripod is ideal to throw in your bock pocket or bag whenever you want to view your phone hands free.
LIMITED One (1) Year Limited Warranty
5. Bower Inc.™ One (1) Year limited Warranty:
This warranty gives you specific legal rights and you may have other rights
which vary from state to state.
The S. Bower Inc.'”‘ Limited Warranty is o voluntary manufacturer’s warranty
provided to the consumer.
This warranty provides rights separate to rights provided by consumer law,
including but not limited to those relating 10 nonconforming goods. S. Bower
Inc.’,. One-Year Limited Warranty benefits ore in addition to, and not instead
of, rights provided by consumer low and it docs not exclude, limit or suspend
o buyer’s rights arising from consumer law. Consumers have the right lo choose
whether to claim service under the S Bower Inc.’,. One-Year Limited Warranty
or under their consumer low rights. The S. Bower Inc.'”‘ One· Year Limited
Warranty terms and conditions shall not apply to consumer low claims, contact
your local consumer organization.
Please note: All claims mode under !he S. Bower Inc.'”‘ One·Yeor Limited
Warranty will be governed by the terms set out in this warranty document
5. Bower Inc.’,. warrants to the product owner that this product will be free
against defects in materials and workmanship for o period of ONE (I) YEAR from
the date of original retail purchase when used in accordance with 5. Bower
Inc.”‘ ‘s user manual. Under this warranty, you will be able to send your
claims and defective product to S. Bower Inc.’ … via freight prepaid, along
with proof of purchase, and will be repaired or replaced, based on 5. Bower
Inc.™ sole discretion. Repair and/or replacement may be made with new or
refurbished product components al 5. Bower Inc.'”‘ sole discretion. This
limited warranty does not cover failures due to abuse, occidental damage or
when repairs hove been mode or anempted by anyone other than S. Bower Inc.™
personnel. A defective product meeting the warranty conditions set forth
herein will be replaced or repaired at no charge in either of two ways: The
first. which will result in exchanges only, is to return the product to the
retailer from whom it was purchased (provided that the store is a
participating retailer). Returns should be made within the time period of the
retailer’s policy for exchanges. Proof of purchase may be required. Please
check with the retailer for its specific return policy regarding lime limits
for returns or exchanges. The second option is to send the product (prepaid
freight) to S. Bower Inc.'” corporate offices located at 5. Bower Inc. 46-24
28th Street 3rd Floor Long Island City, NY 11101 for repair or replacement at
5. Bower Inc.™ ‘s option, Proof of purchase is required. Include name, return
address, and issues that you ore experiencing with 5. Bower Inc.'” products.
All other guarantees, express or implied, ore hereby disclaimed.
This warranty does not apply to products sold in countries sold out of the United States.
c2020 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners S.
Bower, Inc. LIC, NY 11101 www.BowerUSA.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>