PYLE PDIC1651RD In Ceiling Speakers User Guide
- July 5, 2024
- Pyle
Table of Contents
PYLE PDIC1651RD In Ceiling Speakers
Specifications:
- Model Numbers: PDIC1651RD, PDIC1661RD, PDIC1681RD
- Speaker Sizes: (2) 5.25-inch, (2) 6.5-inch, (2) 8.0-inch
- Max Power Output: 150W, 200W, 250W
- Sensitivity: 88 dB, 88 dB, 89 dB
- Frequency Response: 80Hz-20kHz, 70Hz-20kHz, 50Hz-20kHz
- Total Unit Dimensions: 8.0” x 3.0”, 9.0” x 3.1”, 10.7” x 3.5”
- Cutout Diameter: 6.5”, 7.6”, 9.3”
- Cutout Mounting Depth: 2.6”, 2.8”, 3.0”
- Single Speaker Weight: 4.7 lbs., 6.6 lbs., 9.14 lbs.
- Both Speaker Weight: 10.0 lbs., 13.7 lbs., 18.79 lbs.
Product Usage Instructions
Installation:
- Cut the drywall ensuring at least one-half inch between a wall stud and the speaker cutout to allow the locking tabs to swivel into place.
- Connect the speaker wires to the speaker.
- Screw down each of the four Phillips head screws to secure the unit to the rear surface of the drywall.
- Put in strips of adhesive to secure the grille in place.
- Replace the metal grille.
For more detailed instructions and support, visit www.PyleUSA.com
FAQ:
- Q: What is the California Prop 65 Warning for this product?
- A: This product contains chemicals known to the state of California to cause cancer, birth defects, and other reproductive harm. Do not ingest.
- Q: Where can I find more information about the California Prop 65 Warning?
- A: For more information, visit www.P65warnings.ca.gov
- Q: How can I contact customer support for questions or comments?
- A : You can reach us at Phone: 1.718.535.1800 or visit www.PyleUSA.com/ContactUs
Visit Our Website
SCAN ME
PyleUSA.com
USER GUIDE
| PDIC1651RD | PDIC1661RD | PDIC1681RD | |
|---|---|---|---|
| (2) 5.25-inch Speakers | (2) 6.5-inch Speakers | **(2) 8.0-inch |
Speakers**
MAX Power Output| 150 Watt| 200 Watt| 250 Watt
Sensitivity| 88 dB| 88 dB| 89 dB
Frequency Response| 80Hz-20kHz| 70Hz-20kHz| 50Hz-20kHz
Total Unit Dimensions (Diameter x Depth)| 8.0” x 3.0”| 9.0” x 3.1”| 10.7” x
3.5”
Cutout Diameter| 6.5”, Cutout Mounting
Depth: 2.6”
| 7.6”, Cutout Mounting
Depth: 2.8”
| 9.3”, Cutout Mounting
Depth: 3.0”
Single Speaker Weight| 4.7 lbs.| 6.6 lbs.| 9.14 lbs.
Both Speaker Weight| 10.0 lbs.| 13.7 lbs.| 18.79 lbs.
Features
- In-Wall / In-Ceiling System
- Quick Connect Spring-Loaded Speaker Terminals
- 1/2” High Compliance Polymer Tweeter
- Polypropylene Cone with Rubber Edge
- Cut-Out Size Template for Easy Installation
- Environmentally Friendly ABS Construction
- Perfect for Custom Installations & Applications
- Includes Stain stain-resistant grills
- Impedance : 16 Ohms
Questions or Comments?
We are here to help!
- Phone: 1.718.535.1800
- PyleUSA.com/ContactUs
California Prop 65 Warning
WARNING:
This product can expose you to chemicals, which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
Installation
Cut the drywall.
- Note : Always allow at least one-half inch between a wall stud and the speaker cutout, or the locking tabs will not be able to swivel into place.
- Connect the speaker wires to the speaker.
- Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
- Replace the metal grille.
